Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
143 lines (114 sloc) 2.17 KB
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca953x.dtsi"
/ {
compatible = "glinet,gl-ar750", "qca,qca9531";
model = "GL.iNet GL-AR750";
aliases {
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
mode {
label = "mode";
linux,code = <BTN_0>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
power {
label = "gl-ar750:white:power";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "gl-ar750:white:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "gl-ar750:white:wlan5g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
i2c {
compatible = "i2c-gpio";
sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
device_type = "pci";
};
};
&uart {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
num-cs = <0>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
art: partition@50000 {
label = "art";
reg = <0x050000 0x010000>;
read-only;
};
partition@60000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x060000 0xfa0000>;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
phy-handle = <&swphy4>;
};
&eth1 {
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};
You can’t perform that action at this time.