Skip to content
Permalink
Browse files

ath79: add support for TP-Link CPE510-v2/v3

TP-Link CPE510-v2/v3 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - Based on the same underlying hardware as the TP-Link CPE510
 - Power, LAN, and 4 green LEDs
 - 1 10/100Mbps Shielded Ethernet Port (Passive PoE in)
 - Built-in 13dBi 2x2 dual-polarized directional MIMO antenna
 - Adjustable transmission power from 0 to 23dBm/200mw

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[whitespace fixes]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
  • Loading branch information...
apcameron authored and ynezz committed Jun 26, 2019
1 parent 8e384ba commit cad4132e003cecc386d791d552ddba42c182c216
@@ -158,6 +158,15 @@ tplink,cpe210-v3)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
;;
tplink,cpe510-v2|\
tplink,cpe510-v3)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
;;
tplink,cpe610-v1)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
@@ -28,6 +28,8 @@ ath79_setup_interfaces()
pqi,air-pen|\
tplink,cpe210-v2|\
tplink,cpe210-v3|\
tplink,cpe510-v2|\
tplink,cpe510-v3|\
tplink,cpe610-v1|\
tplink,re350k-v1|\
tplink,re355-v1|\
@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include "ar9344_tplink_cpe510.dtsi"

/ {
compatible = "tplink,cpe510-v2", "qca,ar9344";
model = "TP-Link CPE510 v2";
};
@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include "ar9344_tplink_cpe510.dtsi"

/ {
compatible = "tplink,cpe510-v3", "qca,ar9344";
model = "TP-Link CPE510 v3";
};
@@ -0,0 +1,152 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar9344.dtsi"

/ {
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};

leds {
compatible = "gpio-leds";

lan {
label = "tp-link:green:lan";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};

link1 {
label = "tp-link:green:link1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};

link2 {
label = "tp-link:green:link2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};

link3 {
label = "tp-link:green:link3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};

system: link4 {
label = "tp-link:green:link4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};

keys {
compatible = "gpio-keys";

reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};

};

&ref {
clock-frequency = <40000000>;
};

&uart {
status = "okay";
};

&spi {
num-cs = <1>;

status = "okay";

flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;

partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};

partition@20000 {
label = "partition-table";
reg = <0x020000 0x010000>;
read-only;
};

info: partition@30000 {
label = "info";
reg = <0x030000 0x010000>;
read-only;
};

partition@40000 {
label = "firmware";
reg = <0x040000 0x780000>;

compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

partition@0 {
label = "kernel";
reg = <0x000000 0x200000>;
};

partition@200000 {
label = "rootfs";
reg = <0x200000 0x580000>;
};
};

partition@7c0000 {
label = "config";
reg = <0x7c0000 0x030000>;
read-only;
};

art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};

&wmac {
status = "okay";

mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x08>;
};

&eth0 {
status = "okay";

mtd-mac-address = <&info 0x08>;

phy-mode = "mii";
phy-handle = <&swphy4>;
};

&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
@@ -159,6 +159,40 @@ define Device/tplink_cpe210-v3
endef
TARGET_DEVICES += tplink_cpe210-v3

define Device/tplink_cpe510-v2
$(Device/tplink-safeloader)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE510
DEVICE_VARIANT := v2
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE510V2
LOADER_TYPE := elf
LOADER_FLASH_OFFS := 0x43000
COMPILE := loader-$(1).elf
COMPILE/loader-$(1).elf := loader-okli-compile
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
SUPPORTED_DEVICES += cpe510-v2
endef
TARGET_DEVICES += tplink_cpe510-v2

define Device/tplink_cpe510-v3
$(Device/tplink-safeloader)
ATH_SOC := ar9344
IMAGE_SIZE := 7680k
DEVICE_MODEL := CPE510
DEVICE_VARIANT := v3
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE510V3
LOADER_TYPE := elf
LOADER_FLASH_OFFS := 0x43000
COMPILE := loader-$(1).elf
COMPILE/loader-$(1).elf := loader-okli-compile
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
SUPPORTED_DEVICES += cpe510-v3
endef
TARGET_DEVICES += tplink_cpe510-v3

define Device/tplink_cpe610-v1
$(Device/tplink-safeloader)
ATH_SOC := ar9344
@@ -278,6 +278,91 @@ static struct device_info boards[] = {
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "support-list",
},

/** Firmware layout for the CPE510 V2 */
{
.id = "CPE510V2",
.vendor = "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
.support_list =
"SupportList:\r\n"
"CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
"CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
"CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
"CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
"CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
"CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
"CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
"CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
"CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
"CPE510(TP-LINK|UN|N300-5):2.0\r\n"
"CPE510(TP-LINK|EU|N300-5):2.0\r\n"
"CPE510(TP-LINK|US|N300-5):2.0\r\n",
.support_trail = '\xff',
.soft_ver = NULL,

.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"partition-table", 0x20000, 0x02000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
{"os-image", 0x40000, 0x200000},
{"file-system", 0x240000, 0x570000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
{"default-config", 0x7d0000, 0x10000},
{"log", 0x7e0000, 0x10000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},

.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "support-list",
},

/** Firmware layout for the CPE510 V3 */
{
.id = "CPE510V3",
.vendor = "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
.support_list =
"SupportList:\r\n"
"CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
"CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
"CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
"CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
"CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
"CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
"CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
"CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
"CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
"CPE510(TP-LINK|UN|N300-5):3.0\r\n"
"CPE510(TP-LINK|EU|N300-5):3.0\r\n"
"CPE510(TP-LINK|US|N300-5):3.0\r\n",
.support_trail = '\xff',
.soft_ver = NULL,

.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"partition-table", 0x20000, 0x02000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
{"os-image", 0x40000, 0x200000},
{"file-system", 0x240000, 0x570000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
{"default-config", 0x7d0000, 0x10000},
{"log", 0x7e0000, 0x10000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},

.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "support-list",
},

/** Firmware layout for the CPE610V1 */
{
.id = "CPE610V1",

0 comments on commit cad4132

Please sign in to comment.
You can’t perform that action at this time.