Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#850 - Comfast CF-CU715N crashes (rt5370) #5794

Closed
openwrt-bot opened this issue Jun 17, 2017 · 2 comments
Closed

FS#850 - Comfast CF-CU715N crashes (rt5370) #5794

openwrt-bot opened this issue Jun 17, 2017 · 2 comments
Labels

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Jun 17, 2017

murix:

My TP Link WR1043v1 is running LEDE 17.01.2, I use a Comfast CF-CU715N for create a second link in different channel. But the Comfast CF-CU715N which is based in RT5730 (kmod-rt2800-usb).

Linux version 4.4.71 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3101-bce140e) ) #0 Wed Jun 7 19:24:41 2017

Follow the trace
[ 3779.373114] ------------[ cut here ]------------
[ 3779.378077] WARNING: CPU: 0 PID: 3780 at compat-wireless-2017-01-31/net/mac80211/main.c:1218 0x80d812bc mac80211@80d80000+0x60780
[ 3779.390203] Have pending ack frames!
[ 3779.393808] Modules linked in: tun rt2800usb rt2800lib rt2x00usb rt2x00lib crc_itu_t ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[ 3779.462604] CPU: 0 PID: 3780 Comm: kworker/0:0 Not tainted 4.4.71 #0
[ 3779.469029] Workqueue: usb_hub_wq 0x81b84534 [usbcore@81b80000+0x1c1f0]
[ 3779.475697] Stack : 00000010 00000020 ff000000 800a71dc 00000000 00000000 00000000 00000000
[ 3779.475697] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3779.475697] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3779.475697] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3779.475697] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3779.475697] ...
[ 3779.511770] Call Trace:[<800a71dc>] 0x800a71dc
[ 3779.516275] [<80071a50>] 0x80071a50
[ 3779.519791] [<80071a50>] 0x80071a50
[ 3779.523320] [<80081804>] 0x80081804
[ 3779.526864] [<80d812bc>] 0x80d812bc [mac80211@80d80000+0x60780]
[ 3779.532852] [<80d81284>] 0x80d81284 [mac80211@80d80000+0x60780]
[ 3779.538814] [<80081860>] 0x80081860
[ 3779.542361] [<80d812bc>] 0x80d812bc [mac80211@80d80000+0x60780]
[ 3779.548319] [<801a5fac>] 0x801a5fac
[ 3779.551922] [<80d81254>] 0x80d81254 [mac80211@80d80000+0x60780]
[ 3779.557887] [<80ca8520>] 0x80ca8520 [rt2x00usb@80ca8000+0x1ce0]
[ 3779.563892] [<80ca9344>] 0x80ca9344 [rt2x00usb@80ca8000+0x1ce0]
[ 3779.569848] [<8009908c>] 0x8009908c
[ 3779.573405] [<81b8cdf8>] 0x81b8cdf8 [usbcore@81b80000+0x1c1f0]
[ 3779.579325] [<801ff960>] 0x801ff960
[ 3779.582861] [<801fe224>] 0x801fe224
[ 3779.586396] [<801ffa00>] 0x801ffa00
[ 3779.589942] [<801febb0>] 0x801febb0
[ 3779.593477] [<801fc1ec>] 0x801fc1ec
[ 3779.596999] [<801fc138>] 0x801fc138
[ 3779.600534] [<81b8b1e0>] 0x81b8b1e0 [usbcore@81b80000+0x1c1f0]
[ 3779.606449] [<81b8b894>] 0x81b8b894 [usbcore@81b80000+0x1c1f0]
[ 3779.612344] [<81b81858>] 0x81b81858 [usbcore@81b80000+0x1c1f0]
[ 3779.618244] [<81b83bd4>] 0x81b83bd4 [usbcore@81b80000+0x1c1f0]
[ 3779.624179] [<81b84a8c>] 0x81b84a8c [usbcore@81b80000+0x1c1f0]
[ 3779.630134] [<800930b8>] 0x800930b8
[ 3779.633685] [<80093ecc>] 0x80093ecc
[ 3779.637206] [<80093c1c>] 0x80093c1c
[ 3779.640735] [<80093c1c>] 0x80093c1c
[ 3779.644267] [<80098284>] 0x80098284
[ 3779.647790] [<800981ac>] 0x800981ac
[ 3779.651330] [<80060878>] 0x80060878
[ 3779.654856]
[ 3779.656362] ---[ end trace 69bc4427c2b074d4 ]---
[ 3799.640894] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 3799.940887] usb 1-1: reset high-speed USB device number 3 using ehci-platform
[ 3800.102090] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 3800.143725] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 3800.161898] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 3800.180473] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 3800.237431] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jan 31, 2019

psyborg:

still an issue on ath79:

[159176.821071] usb 1-1: USB disconnect, device number 3
[159176.836149] br-lan: port 2(wlan2) entered disabled state
[159176.846479] device wlan2 left promiscuous mode
[159176.851089] br-lan: port 2(wlan2) entered disabled state
[159176.861341] ------------[ cut here ]------------
[159176.866290] WARNING: CPU: 0 PID: 134 at backports-4.19.7-1/net/mac80211/main.c:1274 ieee80211_free_hw+0xac/0xc8 [mac80211]
[159176.877657] Have pending ack frames!
[159176.881372] Modules linked in: ath9k ath9k_common rt2800usb rt2800lib pppoe ppp_async ath9k_hw ath rt2x00usb rt2x00lib pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_itu_t crc_ccitt compat ledtrig_usbport ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base
[159176.953050] usb_common
[159176.955626] CPU: 0 PID: 134 Comm: kworker/0:1 Not tainted 4.14.94 #0
[159176.962223] Workqueue: usb_hub_wq hub_port_debounce [usbcore]
[159176.968132] Stack : 00000009 000004fa 8720e870 800aec58 804e04ac 87dcdb5c 87c22edc 80537987
[159176.976713] 804dc63c 87dcdb34 80530000 800afab4 8720e870 00000000 87dcdb10 ae712b90
[159176.985361] 00000000 00000000 00000000 00006260 00000000 00000000 00000008 00000000
[159176.993955] 00000151 80540000 00000150 71206875 00000000 00000000 876e3700 87681458
[159177.002540] 00000009 000004fa 8720e870 875ff600 00000001 802757a4 00000000 80690000
[159177.011110] ...
[159177.013690] Call Trace:
[159177.016281] [<8006a92c>] show_stack+0x58/0x100
[159177.020892] [<80081440>] __warn+0xe4/0x118
[159177.025149] [<800814a4>] warn_slowpath_fmt+0x30/0x3c
[159177.030388] [<87681458>] ieee80211_free_hw+0xac/0xc8 [mac80211]
[159177.036535] ---[ end trace d6d87b7a8ed47da0 ]---
[159177.591852] usb 1-1: new high-speed USB device number 4 using ehci-platform
[159177.971851] usb 1-1: reset high-speed USB device number 4 using ehci-platform
[159178.182631] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[159178.219130] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 0005 detected
[159178.226932] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[168320.535859] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[168320.552089] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36

BUILD_ID="r9088-4da73af112"
LEDE_BOARD="ath79/generic"
LEDE_ARCH="mips_24kc"
LEDE_TAINTS=""
LEDE_DEVICE_MANUFACTURER="OpenWrt"
LEDE_DEVICE_MANUFACTURER_URL="http://openwrt.org/"
LEDE_DEVICE_PRODUCT="Generic"
LEDE_DEVICE_REVISION="v0"
LEDE_RELEASE="OpenWrt SNAPSHOT r9088-4da73af112"

@ynezz
Copy link
Member

@ynezz ynezz commented Feb 26, 2022

Old.

@ynezz ynezz closed this Feb 26, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

2 participants