Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1158 - ATH10k QCA9880 5 Ghz mixed mode (sta and ap) not possible #6089

Open
openwrt-bot opened this issue Nov 8, 2017 · 7 comments
Open

FS#1158 - ATH10k QCA9880 5 Ghz mixed mode (sta and ap) not possible #6089

openwrt-bot opened this issue Nov 8, 2017 · 7 comments
Labels

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Nov 8, 2017

Rampler:

Hardware: Archer C7 V2
Software: Trunk (r5280)

Using the 5 Ghz radio in accesspoint mode (mode ap) and client mode (mode sta) at the same time doesnt work.
Only client mode works.
No error messages will be generated.
With version V17.01.4 all is fine (same configuration).

Config details:
config wifi-device 'radio0'
option type 'mac80211'
option hwmode '11a'
option path 'pci0000:01/0000:01:00.0'
option noscan '1'
option htmode 'VHT80'
option multicast_querier '0'
option igmp_snooping '0'
option distance '8'
option log_level '3'
option compression '1'
option bursting '1'
option ff '1'
option country 'US'
option txpower '23'
option channel '112'

config wifi-device 'radio1'
option type 'mac80211'
option hwmode '11g'
option path 'platform/qca955x_wmac'
option noscan '1'
option htmode 'HT40'
option distance '15'
option multicast_querier '0'
option igmp_snooping '0'
option log_level '3'
option compression '1'
option bursting '1'
option ff '1'
option channel '9'
option country 'US'
option txpower '24'
option disabled '0'

config wifi-iface
option encryption 'psk2'
option device 'radio0'
option mode 'sta'
option bssid '08:96:D7:7B:89:BA'
option key 'xxxxxxxxxxxxxxxxxxxxxx'
option multicast_querier '0'
option igmp_snooping '0'
option ssid 'Fritz_5Ghz'
option network 'WWAN WWAN6'

config wifi-iface
option ssid 'im6shop'
option device 'radio1'
option key 'xxxxxxxxxxxxxxxxxxxxxx'
option multicast_querier '0'
option igmp_snooping '0'
option network 'LAN'
option mode 'ap'
option encryption 'psk2'

config wifi-iface
option device 'radio0'
option mode 'ap'
option key 'xxxxxxxxxxxxxxxxxxxxxx'
option macfilter 'allow'
list maclist '78:0C:B8:8A:12:45'
list maclist '88:32:9B:F6:70:79'
list maclist 'F0:27:65:7F:7A:19'
option encryption 'psk2+ccmp'
option network 'LAN'
option ssid 'im6shop'

If you need further details, let me know

regards Klaus

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Nov 8, 2017

sumpfralle:

In order to reduce any chance of misunderstandings:

  • Does this setup work for you on another platform? (not QCA9880)
  • What exactly "does not work"?

As far as I know, the mixed ap/sta mode works as follows:

  • the sta mode connection is established (this defines the channel to be used by the interface)
  • the ap setup is established

Thus there will be no ap setup, if the sta fails to connect to its ap.

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Nov 9, 2017

Rampler:

Does this setup work for you on another platform? (not QCA9880)
Sorry, i have only this router (Archer C7 V2), but with stable Version v17.1.04 all is working fine. After upgrade, no AP Mode in 5 Ghz is available.

What exactly "does not work"?
The Archer C7 have two radios, one 2,4 Ghz and one 5 Ghz. I have a client connection (5ghz) to my main router as mode sta. Also i have defined a 5 ghz radio with the same channel, different ssid as mode ap. After upgrading to trunk, the ap (5Ghz) is not working anymore. The 5 Ghz sta connection works every time. Also the 2.4 ghz is ap ist working all the time, it doesnt matter which version of LEDE i use.

Hope this help's
Regards
Klaus

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jul 8, 2018

BIGFAT:

Hallo, this Problem still exist in 18.06.0-rc1 and for the Archer c5 v1 (same hardware).

Greetings.

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Dec 26, 2018

Rampler:

Actuell test with trunk OpenWrt SNAPSHOT r8863, results in:

daemon.err hostapd: Failed to set beacon parameters

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Dec 26, 2018

Rampler:

see also:
FS#1385

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jan 1, 2019

BIGFAT:

Does this setup work for you on another platform? (not QCA9880)

The TP-Link Archer C2600 have the same problem in 18.01 (same 5ghz radio).

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Feb 8, 2021

Razerwire:

FS#3569 is a duplicate of this bug.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant