Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#502 - Switch not configured on Asus RT-N12 B1 (brcm47xx) #6599

Closed
openwrt-bot opened this issue Feb 12, 2017 · 5 comments
Closed

FS#502 - Switch not configured on Asus RT-N12 B1 (brcm47xx) #6599

openwrt-bot opened this issue Feb 12, 2017 · 5 comments
Labels

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Feb 12, 2017

RaylynnKnight:

Device problem occurs on is Asus RT-N12 B1

lede-17.01.0-rc2-r3131-42f3c1f-brcm47xx-mips74k-asus-rt-n12-b1-squashfs.trx

Switch is not recognized so a WAN is not available. Switch was automatically recognized in OpenWrt 15.05.1 and only issue with network was that WAN was initially set on swith port 0 when it should have been set on switch port 4.

dmesg output from lede 17.01.0-rc2:

[ 0.000000] Linux version 4.4.47 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3104-41de9a2) ) #0 Tue Feb 7 08:32:47 2017 [ 0.000000] CPU0 revision is: 00019749 (MIPS 74Kc) [ 0.000000] bcm47xx: Using bcma bus [ 0.000000] bcma: bus0: Found chip with id 53572, rev 0x01 and package 0x08 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 8034e4c0, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 28452K/32768K available (2974K kernel code, 139K rwdata, 368K rodata, 156K init, 294K bss, 4316K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:128 [ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0) [ 0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1C, class 0x0) [ 0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x03, class 0x0) [ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x05, class 0x0) [ 0.000000] bcma: bus0: Core 4 found: SDR/DDR1 Memory Controller (manuf 0x4BF, id 0x835, rev 0x02, class 0x0) [ 0.000000] bcma: bus0: Found rev 9 PMU (capabilities 0x28982A09) [ 0.000000] bcma: bus0: Found serial flash [ 0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128) [ 0.000000] bcma: bus0: Early bus registered [ 0.000000] MIPS: machine is Asus RT-N12B1 [ 0.000000] bcm47xx: Setting up vectored interrupts [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns [ 0.000020] sched_clock: 32 bits at 150MHz, resolution 6ns, wraps every 14316557820ns [ 0.000106] Calibrating delay loop... 149.91 BogoMIPS (lpj=749568) [ 0.070106] pid_max: default: 32768 minimum: 301 [ 0.070427] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070469] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.075669] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.077282] NET: Registered protocol family 16 [ 0.104780] clocksource: Switched to clocksource MIPS [ 0.107686] NET: Registered protocol family 2 [ 0.109893] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.109974] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110031] TCP: Hash tables configured (established 1024 bind 1024) [ 0.110257] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.110437] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.111015] NET: Registered protocol family 1 [ 0.111161] PCI: CLS 0 bytes, default 32 [ 0.597625] bcma: bus0: Using SPROM revision 8 provided by platform. [ 0.597676] bcma: bus0: PMU resource config unknown or not needed for device 0xD144 [ 0.599703] bcma: bus0: Workarounds unknown or not needed for device 0xD144 [ 0.599729] bcma: bus0: Initializing MIPS core... [ 0.599766] bcma: bus0: set_irq: core 0x0812, irq 3 => 3 [ 0.599798] bcma: bus0: set_irq: core 0x082d, irq 4 => 4 [ 0.599829] bcma: bus0: set_irq: core 0x0800, irq 2 => 2 [ 0.599851] bcma: bus0: IRQ reconfiguration done [ 0.599874] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I [ 0.599945] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I [ 0.600007] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I [ 0.600068] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I* [ 0.600131] bcma: core 0x0835, irq : 2(S) 3 4 5 6 D* I [ 0.601715] bcma: bus0: Bus registered [ 0.603117] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.603286] Crashlog allocated RAM at address 0x1f00000 [ 0.643551] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.643594] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.650495] io scheduler noop registered [ 0.650540] io scheduler deadline registered (default) [ 0.651053] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.658270] console [ttyS0] disabled [ 0.678614] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A [ 1.074009] console [ttyS0] enabled [ 1.250464] 6 bcm47xxpart partitions found on MTD device bcm47xxsflash [ 1.257198] Creating 6 MTD partitions on "bcm47xxsflash": [ 1.262711] 0x000000000000-0x000000020000 : "boot" [ 1.273234] 0x000000020000-0x0000007f0000 : "firmware" [ 1.282638] 0x0000007f0000-0x000000800000 : "nvram" [ 1.291759] 0x00000002001c-0x00000002091c : "loader" [ 1.300949] 0x00000002091c-0x000000145800 : "linux" [ 1.310167] 0x000000145800-0x0000007f0000 : "rootfs" [ 1.319386] mtd: device 5 (rootfs) set to be root filesystem [ 1.325369] 1 squashfs-split partitions found on MTD device rootfs [ 1.331711] 0x000000300000-0x0000007f0000 : "rootfs_data" [ 1.345795] libphy: Fixed MDIO Bus: probed [ 1.350282] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS) [ 1.360669] libphy: bcma_mdio mii bus: probed [ 1.365256] bgmac_bcma bcma0:2: Support for Roboswitch not implemented [ 1.496122] b53_common: found switch: BCM5325, rev 4 [ 1.502998] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.509629] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds) [ 1.520532] NET: Registered protocol family 10 [ 1.534005] NET: Registered protocol family 17 [ 1.538839] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.551744] 8021q: 802.1Q VLAN Support v1.8 [ 1.568624] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 1.577364] Freeing unused kernel memory: 156K (80369000 - 80390000) [ 3.716189] init: Console is alive [ 3.720170] init: - watchdog - [ 4.287930] init: - preinit - [ 5.088942] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.694965] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.904669] jffs2: notice: (305) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 10.923756] mount_root: switching to jffs2 overlay [ 10.943399] urandom-seed: Seeding with /etc/urandom.seed [ 11.186490] procd: - early - [ 11.189714] procd: - watchdog - [ 11.994109] procd: - ubus - [ 12.179305] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.190479] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.200799] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.210171] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.220413] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.229786] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.240661] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.250494] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available) [ 12.260797] procd: - init - [ 13.845284] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 13.878283] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.901560] nf_conntrack version 0.5.0 (447 buckets, 1788 max) [ 13.981015] xt_time: kernel timezone is -0000 [ 14.011330] PPP generic driver version 2.4.2 [ 14.021580] NET: Registered protocol family 24 [ 15.963517] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available) [ 16.145341] random: ubusd: uninitialized urandom read (4 bytes read, 25 bits of entropy available) [ 24.737871] device eth0 entered promiscuous mode [ 24.768279] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 26.365075] br-lan: port 1(eth0) entered forwarding state [ 26.370711] br-lan: port 1(eth0) entered forwarding state [ 26.401836] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 28.364908] br-lan: port 1(eth0) entered forwarding state

dmesg output from OpenWrt 15.05.1:

[ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48532) ) #1 Tue Mar 1 09:17:19 CET 2016 [ 0.000000] CPU0 revision is: 00019749 (MIPS 74Kc) [ 0.000000] bcm47xx: Using bcma bus [ 0.000000] bcma: bus0: Found chip with id 53572, rev 0x01 and package 0x08 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 802e4300, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 28904K/32768K available (2594K kernel code, 119K rwdata, 324K rodata, 148K init, 288K bss, 3864K reserved, 0K highmem) [ 0.000000] NR_IRQS:128 [ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0) [ 0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1C, class 0x0) [ 0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x03, class 0x0) [ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x05, class 0x0) [ 0.000000] bcma: bus0: Core 4 found: SDR/DDR1 Memory Controller (manuf 0x4BF, id 0x835, rev 0x02, class 0x0) [ 0.000000] bcma: bus0: Found rev 9 PMU (capabilities 0x28982A09) [ 0.000000] bcma: bus0: Found serial flash [ 0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128) [ 0.000000] bcma: bus0: Early bus registered [ 0.000000] MIPS: machine is Asus RT-N12B1 [ 0.000000] bcm47xx: Setting up vectored interrupts [ 0.070000] Calibrating delay loop... 149.91 BogoMIPS (lpj=749568) [ 0.070000] pid_max: default: 32768 minimum: 301 [ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070000] NET: Registered protocol family 16 [ 0.090000] Switched to clocksource MIPS [ 0.090000] NET: Registered protocol family 2 [ 0.100000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.100000] TCP: reno registered [ 0.100000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.100000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 1 [ 0.100000] PCI: CLS 0 bytes, default 32 [ 0.540000] bcma: bus0: Using SPROM revision 8 provided by platform. [ 0.540000] bcma: bus0: PMU resource config unknown or not needed for device 0xD144 [ 0.540000] bcma: bus0: Workarounds unknown or not needed for device 0xD144 [ 0.540000] bcma: bus0: Initializing MIPS core... [ 0.540000] bcma: bus0: set_irq: core 0x0812, irq 3 => 3 [ 0.540000] bcma: bus0: set_irq: core 0x082d, irq 4 => 4 [ 0.540000] bcma: bus0: set_irq: core 0x0800, irq 2 => 2 [ 0.540000] bcma: bus0: IRQ reconfiguration done [ 0.540000] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I [ 0.540000] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I [ 0.540000] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I [ 0.540000] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I* [ 0.540000] bcma: core 0x0835, irq : 2(S) 3 4 5 6 D* I [ 0.540000] bcma: bus0: Bus registered [ 0.540000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.550000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.550000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.550000] msgmni has been set to 56 [ 0.550000] io scheduler noop registered [ 0.550000] io scheduler deadline registered (default) [ 0.550000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.560000] console [ttyS0] disabled [ 0.580000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A [ 0.920000] console [ttyS0] enabled [ 1.030000] 6 bcm47xxpart partitions found on MTD device bcm47xxsflash [ 1.030000] Creating 6 MTD partitions on "bcm47xxsflash": [ 1.040000] 0x000000000000-0x000000020000 : "boot" [ 1.050000] 0x000000020000-0x0000007f0000 : "firmware" [ 1.050000] 0x00000002001c-0x00000002090c : "loader" [ 1.060000] 0x00000002090c-0x000000127800 : "linux" [ 1.070000] 0x000000127800-0x0000007f0000 : "rootfs" [ 1.070000] mtd: device 4 (rootfs) set to be root filesystem [ 1.080000] 1 squashfs-split partitions found on MTD device rootfs [ 1.090000] 0x000000350000-0x0000007f0000 : "rootfs_data" [ 1.090000] 0x0000007f0000-0x000000800000 : "nvram" [ 1.100000] bgmac bcma0:2: Found PHY addr: 30 (NOREGS) [ 1.110000] bgmac bcma0:2: Support for Roboswitch not implemented [ 1.170000] libphy: bgmac mii bus: probed [ 1.290000] b53_common: found switch: BCM5325, rev 4 [ 1.290000] bgmac: Broadcom 47xx GBit MAC driver loaded [ 1.300000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds) [ 1.310000] TCP: cubic registered [ 1.310000] NET: Registered protocol family 17 [ 1.310000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.330000] Bridge firewalling registered [ 1.330000] 8021q: 802.1Q VLAN Support v1.8 [ 1.350000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. [ 1.360000] Freeing unused kernel memory: 148K (802fb000 - 80320000) [ 3.710000] init: Console is alive [ 3.710000] init: - watchdog - [ 5.850000] init: - preinit - [ 6.870000] random: mktemp urandom read with 10 bits of entropy available [ 10.460000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 10.520000] procd: - early - [ 10.520000] procd: - watchdog - [ 11.660000] procd: - ubus - [ 12.670000] procd: - init - [ 17.250000] NET: Registered protocol family 10 [ 17.270000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 17.300000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 17.310000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 17.320000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.350000] nf_conntrack version 0.5.0 (453 buckets, 1812 max) [ 17.430000] xt_time: kernel timezone is -0000 [ 17.480000] cfg80211: Calling CRDA to update world regulatory domain [ 17.520000] cfg80211: World regulatory domain updated: [ 17.520000] cfg80211: DFS Master region: unset [ 17.530000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 17.540000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.550000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 17.550000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 17.560000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 17.570000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 17.580000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 17.590000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 17.600000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 17.710000] PPP generic driver version 2.4.2 [ 17.720000] NET: Registered protocol family 24 [ 17.770000] b43-phy0: Broadcom 53572 WLAN found (core revision 28) [ 17.780000] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17 [ 17.790000] b43-phy0 ERROR: FOUND UNSUPPORTED RADIO (Manuf 0x17F, ID 0x2057, Revision 13, Version 0) [ 17.800000] b43: probe of bcma0:1 failed with error -122 [ 17.800000] Broadcom 43xx driver loaded [ Features: NL ] [ 32.590000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 32.590000] jffs2_build_filesystem(): unlocking the mtd device... done. [ 32.600000] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 38.630000] device eth0.1 entered promiscuous mode [ 38.640000] device eth0 entered promiscuous mode
@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Feb 12, 2017

bjonglez:

The switch seems to be properly detected, the issue is probably that it's not configured.

This was likely broken in https://git.lede-project.org/?p=source.git;a=commit;h=b0b8293b7e0cf6102dca56b47bf25a92b8feba66

See also https://git.lede-project.org/?p=source.git;a=commit;h=0e8ba8ffcdeebc1b95cb3e9b2150d08af19244cc

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Feb 12, 2017

bjonglez:

Raylynn, can you provide the output of /proc/cpuinfo on the running system? (with LEDE)

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jul 14, 2017

h1onlede:

Followup from me and with a RT-N12D1 Router (D1 instead of B1) and Lede 17.01.2:
I believe all Asus RT-N12/16 have switched switch ports, I saw similar discussions on TomatoUsb/Shibby.
When installing a Lede firmware, on first start WAN and LAN1-3 ports are bridged, so if you are lucky behind another router this one will answer your dhcp request. I was able to ssh in with ipv6 local link, and then change vlans:
uci set network.@switch_vlan[0].ports='0 1 2 3 5t' # was '1 2 3 4 5t' before
uci set network.@switch_vlan[1].ports='4 5t' # was '0 5t' before
uci commit network

and after next reboot the switch did work as expected. This little change is all to make Asus RT-N1x routers happy (save the wireless problem on another issue - 797).

Correcting this in the build can probably be done in source/target/linux/brcm47xx/base-files/etc/board.d/01_detect. The heuristic based on nvram contents fails as these routers erroneously report
root@LEDE:# nvram get vlan0ports
1 2 3 4 5*
root@LEDE:
# nvram get vlan1ports
0 5

and that is wrong, as these routers have the numbering reversed. One must add the RT-N12/RT-N12D1 and probably RT-N16 to the detect_by_model() subroutine, where they should go to the ruleset starting with "Asus WL500GP V2".

Ah, and btw to anwer Baptiste Jonglez's question with my D1 router:

root@LEDE:~# cat /proc/cpuinfo
system type : Broadcom BCM53572
machine : Asus RT-N12D1
processor : 0
cpu model : MIPS 74Kc V4.9
BogoMIPS : 149.91
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp dsp2
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jul 14, 2017

jow-:

Can you please apply the following fix to /etc/board.d/01_detect, delete /etc/config/network, reboot and check if the config is properly generated?

diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
index 357cc7f224..50db0d90ae 100755
--- a/target/linux/brcm47xx/base-files/etc/board.d/01_detect
+++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
@@ -144,6 +144,8 @@ detect_by_model() {
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;

  •   "Asus RT-N12"* | \
    
  •   "Asus RT-N16"* | \
      "Asus WL500GP V2" | \
      "Buffalo WHR-G125" | \
      "Motorola WR850G" | \
    

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jun 16, 2018

unixninja92:

I can confirm that adding those two line to 01_detect fixes the issue at least on the Asus RT-N12-D1

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant