Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#2066 - USB doesn't work on openwrt-18.06.1 & lede-17.01.4 #6932

Open
openwrt-bot opened this issue Jan 20, 2019 · 2 comments
Open

FS#2066 - USB doesn't work on openwrt-18.06.1 & lede-17.01.4 #6932

openwrt-bot opened this issue Jan 20, 2019 · 2 comments
Labels
flyspray kernel

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Jan 20, 2019

Deimos1994:

Hello, it's my first issue here.
My hardware: ALFA Network W502U / R36
Problem: USB port doesn't work.
It works on openwrt-15.05, but does not work on lede-17.01.4 & openwrt-18.06.1.
I tried all I could find on google, but no successes.

All bellow done using: OpenWrt 18.06.1, r7258-5eb055306f

I don't know how to do diagnostics properly, but here is what I already did:

root@OpenWrt:# lsusb -t
Segmentation fault
root@OpenWrt:
# lsusb
unable to initialize libusb: -99
root@OpenWrt:# opkg list-installed | grep usb
kmod-usb-core - 4.14.63-1
kmod-usb-ehci - 4.14.63-1
kmod-usb-storage - 4.14.63-1
kmod-usb-uhci - 4.14.63-1
kmod-usb2 - 4.14.63-1
libusb-1.0 - 1.0.22-1
usbutils - 007-9
root@OpenWrt:
# lsusb
unable to initialize libusb: -99
root@OpenWrt:# lsusb -t
Segmentation fault
root@OpenWrt:
#


Maybe this can help:
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 Thu Aug 16 07:51:15 20 18
[ 0.000000] SoC Type: Ralink RT3350 id:1 rev:2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
[ 0.000000] MIPS: machine is ALFA Networks W502U
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 byt es
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 803eaeb0, node_mem_map 8100004 0
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] random: get_random_bytes called from 0x803ee72c with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jff s2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00065de0
[ 0.000000] Readback ErrCtl register=00065de0
[ 0.000000] Memory: 27964K/32768K available (3419K kernel code, 172K rwdata, 424K rodata, 200K init, 210K bss, 4804K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 256
[ 0.000000] CPU Clock: 320MHz
[ 0.000000] timer_probe: no matching timers found
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 11945377789 ns
[ 0.000019] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421 772796ns
[ 0.007898] Calibrating delay loop... 212.58 BogoMIPS (lpj=1062912)
[ 0.094000] pid_max: default: 32768 minimum: 301
[ 0.099003] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.105607] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.122218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.132051] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.138273] pinctrl core: initialized pinctrl subsystem
[ 0.146792] NET: Registered protocol family 16
[ 0.160804] Can't analyze schedule() prologue at 80352ab0
[ 0.213659] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.219347] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.236791] clocksource: Switched to clocksource MIPS
[ 0.244339] NET: Registered protocol family 2
[ 0.250848] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.257890] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.264159] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.270926] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.276710] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.283640] NET: Registered protocol family 1
[ 0.295590] rt-timer 10000100.timer: maximum frequency is 3255Hz
[ 0.303509] Crashlog allocated RAM at address 0x1f00000
[ 0.313920] workingset: timestamp_bits=30 max_order=13 bucket_order=0
[ 0.332748] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.338615] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.380470] io scheduler noop registered
[ 0.384301] io scheduler deadline registered (default)
[ 0.390769] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.403784] console [ttyS0] disabled
[ 0.407515] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 6666666) is a Palmchip BK-3103
[ 0.417412] console [ttyS0] enabled
[ 0.424364] bootconsole [early0] disabled
[ 0.433566] cacheinfo: Failed to find cpu0 device node
[ 0.438911] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.446463] 1f000000.cfi: Found 1 x16 devices at 0x0 in 16-bit bank. Manufact urer ID 0x0000c2 Chip ID 0x0022cb
[ 0.456743] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.462002] Amd/Fujitsu Extended Query version 1.1.
[ 0.467163] number of CFI chips: 1
[ 0.488329] 4 fixed-partitions partitions found on MTD device 1f000000.cfi
[ 0.495300] Creating 4 MTD partitions on "1f000000.cfi":
[ 0.500855] 0x000000000000-0x000000030000 : "u-boot"
[ 0.508096] 0x000000030000-0x000000040000 : "u-boot-env"
[ 0.515425] 0x000000040000-0x000000050000 : "factory"
[ 0.522776] 0x000000050000-0x000000800000 : "firmware"
[ 0.542321] 2 uimage-fw partitions found on MTD device firmware
[ 0.548525] 0x000000050000-0x00000019e790 : "kernel"
[ 0.555519] 0x00000019e790-0x000000800000 : "rootfs"
[ 0.562562] mtd: device 5 (rootfs) set to be root filesystem
[ 0.568501] 1 squashfs-split partitions found on MTD device rootfs
[ 0.574802] 0x0000003c0000-0x000000800000 : "rootfs_data"
[ 0.583610] libphy: Fixed MDIO Bus: probed
[ 0.591353] rt3050-esw 10110000.esw: link changed 0x01
[ 0.609880] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0 100000, irq 5
[ 0.619526] rt2880_wdt 10000120.watchdog: Initialized
[ 0.627610] NET: Registered protocol family 10
[ 0.642865] Segment Routing with IPv6
[ 0.646978] NET: Registered protocol family 17
[ 0.651634] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.664823] 8021q: 802.1Q VLAN Support v1.8
[ 0.681284] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 0.691413] Freeing unused kernel memory: 200K
[ 0.695918] This architecture does not have kernel memory protection.
[ 1.619412] init: Console is alive
[ 1.623555] init: - watchdog -
[ 2.396830] random: fast init done
[ 2.722565] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 2.890829] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 2.910041] init: - preinit -
[ 4.382680] 8021q: adding VLAN 0 to HW filter on device eth0
[ 4.672961] random: procd: uninitialized urandom read (4 bytes read)
[ 8.115618] jffs2: notice: (324) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 4 of xdatum (3 unchecked, 1 orphan) and 32 of xref (1 dead, 0 orphan) found.
[ 8.134525] mount_root: switching to jffs2 overlay
[ 8.190331] overlayfs: upper fs does not support tmpfile.
[ 8.206092] urandom-seed: Seeding with /etc/urandom.seed
[ 8.442557] procd: - early -
[ 8.445811] procd: - watchdog -
[ 9.256926] procd: - watchdog -
[ 9.261065] procd: - ubus -
[ 9.415882] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.427196] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.434866] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.444910] procd: - init -
[ 10.363541] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.493682] usbcore: registered new interface driver usbfs
[ 10.499804] usbcore: registered new interface driver hub
[ 10.505524] usbcore: registered new device driver usb
[ 10.542139] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.640628] SCSI subsystem initialized
[ 10.679912] ehci-platform: EHCI generic platform driver
[ 10.696730] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.732456] Loading modules backported from Linux version wt-2017-11-01-0-gfe 248fc2c180
[ 10.740697] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 10.756445] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.782367] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 10.925284] usbcore: registered new interface driver usb-storage
[ 10.976219] xt_time: kernel timezone is -0000
[ 11.101389] PPP generic driver version 2.4.2
[ 11.112322] NET: Registered protocol family 24
[ 11.161352] usbcore: registered new interface driver rtl8187
[ 11.203176] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory "
[ 11.210710] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0200 d etected
[ 11.218641] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 11.227089] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.399574] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 13.487575] urandom_read: 5 callbacks suppressed
[ 13.487592] random: jshn: uninitialized urandom read (4 bytes read)
[ 31.034969] 8021q: adding VLAN 0 to HW filter on device eth0
[ 31.128839] br-lan: port 1(eth0.1) entered blocking state
[ 31.134327] br-lan: port 1(eth0.1) entered disabled state
[ 31.140711] device eth0.1 entered promiscuous mode
[ 31.145584] device eth0 entered promiscuous mode
[ 31.247802] br-lan: port 1(eth0.1) entered blocking state
[ 31.253292] br-lan: port 1(eth0.1) entered forwarding state
[ 31.259544] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 32.027373] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 39.584842] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.605642] br-lan: port 2(wlan0) entered blocking state
[ 39.611182] br-lan: port 2(wlan0) entered disabled state
[ 39.617552] device wlan0 entered promiscuous mode
[ 40.719820] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.726761] br-lan: port 2(wlan0) entered blocking state
[ 40.732315] br-lan: port 2(wlan0) entered forwarding state
[ 76.772365] random: crng init done
[ 83.214660] do_page_fault(): sending SIGSEGV to lsusb for invalid read access from 00000000
[ 83.223256] epc = 00406f3d in lsusb[400000+11000]
[ 83.228069] ra = 00406f19 in lsusb[400000+11000]
[ 1235.373340] do_page_fault(): sending SIGSEGV to lsusb for invalid read access from 00000000
[ 1235.381999] epc = 00406f3d in lsusb[400000+11000]
[ 1235.386822] ra = 00406f19 in lsusb[400000+11000]

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jan 30, 2019

kayo:

TP-Link Archer C7 AC1750 v5.0
I had this problem too. USB works OK when I installd kmod-usb2

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jul 8, 2020

adrianschmutzler:

So, does it work when you add

DEVICE_PACKAGES := kmod-usb2

to this node:

https://github.com/openwrt/openwrt/blob/master/target/linux/ramips/image/rt305x.mk#L79

?

@aparcar aparcar added the kernel label Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray kernel
Projects
None yet
Development

No branches or pull requests

2 participants