Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#4071 - Lantiq-VRX200 modem is using wrong line mode #7040

Open
openwrt-bot opened this issue Oct 8, 2021 · 1 comment
Open

FS#4071 - Lantiq-VRX200 modem is using wrong line mode #7040

openwrt-bot opened this issue Oct 8, 2021 · 1 comment
Labels
flyspray release/21.02

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Oct 8, 2021

eporsche:

Supply the following if possible:

  • Device problem occurs on

  • AVM Fritz 7412

  • Lantiq-VRX200

  • Software versions of OpenWrt/LEDE release, packages, etc.
    21.02.0 (r16279-5cc0535800)

  • Steps to reproduce

  • Flash firmware

  • Enter ISP configuration for 1&1 (https://openwrt.org/docs/guide-user/network/wan/isp-configurations)

  • Download and use the modem firmware supplied by AVM: 5.9.0.12.1.7 or 5.9.1.4.0.7

Openwrt will be using: Line Mode: G.993.2 (VDSL2 with down- and upstream vectoring)
instead of: Line Mode: G.993.5 (VDSL2 with down- and upstream vectoring)
which is used by the stock fritz box firmware. This results in a speed decrease from possible
Max. Attainable Data Rate (ATTNDR): 133.841 Mb/s (down) to 25.000 Mb/s (down)

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Oct 8, 2021

moeller0:

Mmmh, G.993.5 is the actual vectoring spec and not the standard in use, according to how I read the new code
G.993.2 (VDSL2 with down- and upstream vectoring)
really is OpenWrt's way of saying G 993.5....

The downgrade in Download sync indicates maybe that the DSLAM put your modem into a fall-backprofile? (E.g. in Germany the incumbent Deutsche Telekom, will move links where DSLAM and Modem could not successfully negotiate vectoring into a profile only using the lowest 2.2 MHz of spectrum as that is exempted from Vectoring so that old ADSL modems do not eed to be relaced). Now, that system should automatically renegotiate vectoring and release the spectrum restricted profile once a vectoring capable mode successfully handshakes with the DSLAM, but I heard anecdotal reports, that operator intervention sometimes was required after sme experiments with non-vectoring enabled firmware blobs.

@aparcar aparcar added the release/21.02 label Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray release/21.02
Projects
None yet
Development

No branches or pull requests

2 participants