Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1940 - Crash at at net/sched/sch_generic.c #7185

Open
openwrt-bot opened this issue Nov 8, 2018 · 2 comments
Open

FS#1940 - Crash at at net/sched/sch_generic.c #7185

openwrt-bot opened this issue Nov 8, 2018 · 2 comments
Labels

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Nov 8, 2018

milefork:

It's my first Bugreport here, so don't blame me please using the wrong formatting or something.

Happend on a Xiaomi Mi Router 3G
Architecture: MediaTek MT7621 ver:1 eco:3
Firmware: OpenWrt SNAPSHOT r8121-9f0cb13 / LuCI Master (git-18.264.24000-89a4fdd)
Kernel Version: 4.14.71
Uptime: 21d 11h 4m 2s


<code>[    0.000000] Linux version 4.14.71 (buildbot@crazyhorse) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8121-9f0cb13)) #0 SMP Sun Sep 23 15:45:08 2018
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Xiaomi Mi Router 3G
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat 805c8280, node_mem_map 81003000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x4ac with crng_init=0
[    0.000000] percpu: Embedded 14 pages/cpu @81210000 s26256 r8192 d22896 u57344
[    0.000000] pcpu-alloc: s26256 r8192 d22896 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Writing ErrCtl register=0000b000
[    0.000000] Readback ErrCtl register=0000b000
[    0.000000] Memory: 253140K/262144K available (4646K kernel code, 241K rwdata, 1032K rodata, 212K init, 282K bss, 9004K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 256
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.007814] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.073975] pid_max: default: 32768 minimum: 301
[    0.078746] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.085253] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.094058] Hierarchical SRCU implementation.
[    0.099230] smp: Bringing up secondary CPUs ...
[    0.116621] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.116631] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.116643] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.116781] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.163977] Synchronize counters for CPU 1: done.
[    0.210735] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.210744] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.210754] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.210824] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.255104] Synchronize counters for CPU 2: done.
[    0.297768] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.297775] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.297784] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.297857] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.340281] Synchronize counters for CPU 3: done.
[    0.370143] smp: Brought up 1 node, 4 CPUs
[    0.377934] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.387726] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    0.394028] pinctrl core: initialized pinctrl subsystem
[    0.400632] NET: Registered protocol family 16
[    0.414353] FPU Affinity set after 11720 emulations
[    0.415225] pull PCIe RST: RALINK_RSTCTRL = 4000000
[    0.720474] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.725520] ***** Xtal 40MHz *****
[    0.728878] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.733977] Port 0 N_FTS = 1b105000
[    0.737446] Port 1 N_FTS = 1b105000
[    0.740888] Port 2 N_FTS = 1b102800
[    1.896122] PCIE2 no card, disable it(RST&CLK)
[    1.900485]  -> 21007f2
[    1.902887] PCIE0 enabled
[    1.905476] PCIE1 enabled
[    1.908080] PCI host bridge /pcie@1e140000 ranges:
[    1.912860]  MEM 0x0000000060000000..0x000000006fffffff
[    1.918010]   IO 0x000000001e160000..0x000000001e16ffff
[    1.923209] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
[    1.939229] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.945101] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.950815] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.958511] PCI host bridge to bus 0000:00
[    1.962551] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.969378] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    1.975232] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    1.981991] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.989880] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.989921] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.989934] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[    1.990001] pci 0000:00:00.0: supports D1
[    1.990010] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.990257] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    1.990297] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.990317] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[    1.990379] pci 0000:00:01.0: supports D1
[    1.990389] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    1.990865] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
[    1.990921] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    1.991051] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.991264] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.991535] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
[    1.991599] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    1.991644] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.991740] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.991961] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    1.992035] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[    1.992102] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    1.998615] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.005547] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.012088] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.019018] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.025749] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[    2.032501] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
[    2.039657] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[    2.046417] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[    2.053137] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
[    2.059887] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.064802] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.071560] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[    2.078806] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
[    2.085980] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.090887] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
[    2.097639] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
[    2.106379] clocksource: Switched to clocksource GIC
[    2.112935] NET: Registered protocol family 2
[    2.118037] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    2.124921] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    2.131345] TCP: Hash tables configured (established 2048 bind 2048)
[    2.137749] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.143515] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.149965] NET: Registered protocol family 1
[    2.154283] PCI: CLS 0 bytes, default 32
[    2.386331] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    2.392750] Crashlog allocated RAM at address 0x3f00000
[    2.398126] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[    2.408447] random: fast init done
[    2.414592] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.420435] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.433456] io scheduler noop registered
[    2.437354] io scheduler deadline registered (default)
[    2.443388] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    2.452695] console [ttyS0] disabled
[    2.456243] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[    2.465254] console [ttyS0] enabled
[    2.472128] bootconsole [early0] disabled
[    2.480843] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.487749] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[    2.494804] Enable NFI Clock
[    2.497788] # MTK NAND # : Use HW ECC
[    2.501453] Device not found, ID: c8d1
[    2.505177] Not Support this Device! 
[    2.508922] chip_mode=00000001
[    2.511961] Support this Device in MTK table! c8d1 
[    2.516931] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
[    2.523390] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
[    2.529727] nand: ESMT NAND 128MiB 3,3V 8-bit
[    2.534064] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.541634] Scanning device for bad blocks
[    2.691286] 10 fixed-partitions partitions found on MTD device MT7621-NAND
[    2.698146] Creating 10 MTD partitions on "MT7621-NAND":
[    2.703441] 0x000000000000-0x000000080000 : "Bootloader"
[    2.709741] 0x000000080000-0x0000000c0000 : "Config"
[    2.715570] 0x0000000c0000-0x000000100000 : "Bdata"
[    2.721345] 0x000000100000-0x000000140000 : "Factory"
[    2.727279] 0x000000140000-0x000000180000 : "crash"
[    2.732950] 0x000000180000-0x0000001c0000 : "crash_syslog"
[    2.739379] 0x0000001c0000-0x000000200000 : "reserved0"
[    2.745415] 0x000000200000-0x000000600000 : "kernel_stock"
[    2.751846] 0x000000600000-0x000000a00000 : "kernel"
[    2.757731] 0x000000a00000-0x000007f80000 : "ubi"
[    2.764193] [mtk_nand] probe successfully!
[    2.769046] Signature matched and data read!
[    2.773293] load_fact_bbt success 1023
[    2.777691] libphy: Fixed MDIO Bus: probed
[    2.848976] libphy: mdio: probed
[    4.252654] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    4.259343] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
[    4.270147] NET: Registered protocol family 10
[    4.275976] Segment Routing with IPv6
[    4.279792] NET: Registered protocol family 17
[    4.284271] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.297188] 8021q: 802.1Q VLAN Support v1.8
[    4.304363] UBI: auto-attach mtd9
[    4.307728] ubi0: attaching mtd9
[    4.566981] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
[    5.418406] ubi0: scanning is finished
[    5.438343] ubi0: attached mtd9 (name "ubi", size 117 MiB)
[    5.443821] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.450711] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.457490] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.464415] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
[    5.470413] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    5.477622] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1784382385
[    5.486733] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20
[    5.495944] ubi0: background thread "ubi_bgt0d" started, PID 393
[    5.497988] block ubiblock0_0: created from ubi0:0(rootfs)
[    5.498003] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    5.498024] hctosys: unable to open rtc device (rtc0)
[    5.498402] usb_vbus: disabling
[    5.529115] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    5.536798] Freeing unused kernel memory: 212K
[    5.541236] This architecture does not have kernel memory protection.
[    6.078086] init: Console is alive
[    6.081728] init: - watchdog -
[    6.597857] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.687477] usbcore: registered new interface driver usbfs
[    6.693032] usbcore: registered new interface driver hub
[    6.698523] usbcore: registered new device driver usb
[    6.713079] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[    6.722073] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.727437] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    6.746528] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[    6.755015] xhci-mtk 1e1c0000.xhci: irq 19, io mem 0x1e1c0000
[    6.761822] hub 1-0:1.0: USB hub found
[    6.765649] hub 1-0:1.0: 2 ports detected
[    6.768204] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
[    6.776055] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.781400] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    6.788889] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0  SuperSpeed
[    6.795493] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.804431] hub 2-0:1.0: USB hub found
[    6.808278] hub 2-0:1.0: 1 port detected
[    6.815186] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.836707] init: - preinit -
[    7.585842] mtk_soc_eth 1e100000.ethernet: PPE started
[    7.661226] random: procd: uninitialized urandom read (4 bytes read)
[   10.797221] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 487
[   10.871665] UBIFS (ubi0:1): recovery needed
[   11.060011] UBIFS (ubi0:1): recovery completed
[   11.064605] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.072423] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.082321] UBIFS (ubi0:1): FS size: 112373760 bytes (107 MiB, 885 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[   11.092902] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[   11.099504] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID A4B934E8-BA84-4B25-81EB-59E2F9F66052, small LPT model
[   11.118119] mount_root: switching to ubifs overlay
[   11.149135] urandom-seed: Seeding with /etc/urandom.seed
[   11.241923] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[   11.256885] procd: - early -
[   11.259863] procd: - watchdog -
[   11.916529] procd: - watchdog -
[   11.919980] procd: - ubus -
[   11.995998] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.008017] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.014790] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.022084] procd: - init -
[   12.377269] kmodloader: loading kernel modules from /etc/modules.d/*
[   12.387736] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   12.395726] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   12.406986] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[   12.450736] xt_time: kernel timezone is -0000
[   12.469714] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.504522] bus=0x1, slot = 0x0, irq=0xff
[   12.508826] mt7603e 0000:01:00.0: ASIC revision: 76030010
[   12.517576] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
[   12.523148] mt7603e 0000:01:00.0: Build Time: 20160107100755
[   12.566403] firmware init done
[   12.737316] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.744906] bus=0x2, slot = 0x1, irq=0xff
[   12.749208] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[   12.777141] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
[   12.886775] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
[   12.892265] mt76x2e 0000:02:00.0: Build: 1
[   12.896406] mt76x2e 0000:02:00.0: Build Time: 201507311614____
[   12.916417] mt76x2e 0000:02:00.0: Firmware running!
[   12.922909] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   12.929866] kmodloader: done loading kernel modules from /etc/modules.d/*
[   13.578599] urandom_read: 5 callbacks suppressed
[   13.578614] random: jshn: uninitialized urandom read (4 bytes read)
[   18.396574] mtk_soc_eth 1e100000.ethernet: PPE started
[   18.407897] device eth0 entered promiscuous mode
[   18.414814] br-lan: port 1(eth0.1) entered blocking state
[   18.420300] br-lan: port 1(eth0.1) entered disabled state
[   18.426874] device eth0.1 entered promiscuous mode
[   18.436415] br-lan: port 1(eth0.1) entered blocking state
[   18.441835] br-lan: port 1(eth0.1) entered forwarding state
[   18.447972] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   18.469826] br-lan: port 2(eth0.2) entered blocking state
[   18.475262] br-lan: port 2(eth0.2) entered disabled state
[   18.481435] device eth0.2 entered promiscuous mode
[   18.486718] br-lan: port 2(eth0.2) entered blocking state
[   18.492173] br-lan: port 2(eth0.2) entered forwarding state
[   19.388952] random: crng init done
[   19.400056] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   20.215037] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.224019] br-lan: port 3(wlan0) entered blocking state
[   20.229395] br-lan: port 3(wlan0) entered disabled state
[   20.235114] device wlan0 entered promiscuous mode
[   20.240017] br-lan: port 3(wlan0) entered blocking state
[   20.245318] br-lan: port 3(wlan0) entered forwarding state
[   20.451077] br-lan: port 3(wlan0) entered disabled state
[   20.786187] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   20.793049] br-lan: port 3(wlan0) entered blocking state
[   20.798490] br-lan: port 3(wlan0) entered forwarding state
[   21.259926] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   21.270249] br-lan: port 4(wlan1) entered blocking state
[   21.275580] br-lan: port 4(wlan1) entered disabled state
[   21.281579] device wlan1 entered promiscuous mode
[   21.286660] br-lan: port 4(wlan1) entered blocking state
[   21.291999] br-lan: port 4(wlan1) entered forwarding state
[   21.416558] br-lan: port 4(wlan1) entered disabled state
[  101.519124] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  101.525916] br-lan: port 4(wlan1) entered blocking state
[  101.531221] br-lan: port 4(wlan1) entered forwarding state
[1380778.703917] ------------[ cut here ]------------
[1380778.708749] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x1ac/0x324
[1380778.717174] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
[1380778.724293] Modules linked in: nf_conntrack_ipv6 mt76x2e mt7603e mt76 mac80211 iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ip_tables cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD xt_CT x_tables nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack compat ledtrig_usbport leds_gpio xhci_mtk xhci_plat_hcd xhci_pci xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[1380778.781588] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.71 #0
[1380778.787741] Stack : 00000000 8fe0b240 805a0000 8006f7e4 805d0000 805663c0 00000000 00000000
[1380778.796251]         80530e88 8fc09dc4 805a2dbc 805a2947 8052bfb8 00000001 8fc09d68 1cc282a7
[1380778.804756]         00000000 00000000 80600000 00006120 00000000 0000013a 00000008 00000000
[1380778.813259]         00000000 805a0000 000bed14 00000000 00000000 00000000 805d0000 80379fb8
[1380778.821763]         00000009 00000140 00000000 8fe0b240 00000001 8029cdf8 00000000 80600000
[1380778.830268]         ...
[1380778.832876] Call Trace:
[1380778.835506] [<80010670>] show_stack+0x58/0x100
[1380778.840122] [<8046c27c>] dump_stack+0x9c/0xe0
[1380778.844636] [<8002e408>] __warn+0xe0/0x114
[1380778.848886] [<8002e46c>] warn_slowpath_fmt+0x30/0x3c
[1380778.854002] [<80379fb8>] dev_watchdog+0x1ac/0x324
[1380778.858873] [<80086754>] call_timer_fn.isra.3+0x24/0x84
[1380778.864247] [<80086970>] run_timer_softirq+0x1bc/0x248
[1380778.869555] [<80489740>] __do_softirq+0x128/0x2ec
[1380778.874416] [<80032b34>] irq_exit+0xac/0xc8
[1380778.878774] [<8024b3fc>] plat_irq_dispatch+0xfc/0x138
[1380778.883976] [<8000b5e8>] except_vec_vi_end+0xb8/0xc4
[1380778.889089] [<8000cfb0>] r4k_wait_irqoff+0x1c/0x24
[1380778.894054] [<8006685c>] do_idle+0xe4/0x168
[1380778.898390] [<80066ad8>] cpu_startup_entry+0x24/0x2c
[1380778.903508] [<805cbbf8>] start_kernel+0x48c/0x4ac
[1380778.908470] ---[ end trace c8dd6f0a0de2551e ]---
[1380778.913251] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[1380778.919606] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
[1380778.925787] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=0ea00000, max=0, ctx=515, dtx=515, fdx=514, next=515
[1380778.936459] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=0e190000, max=0, calc=2503, drx=2505
[1380778.950217] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[1380778.963338] mtk_soc_eth 1e100000.ethernet: PPE started</code>

I hope this helps to find it. Otherwise just close it.

Greetings
@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jun 6, 2019

xback:

Hi,

There have been numerous kernel bumps in the meantime.
Is this issue still occuring when using the latest master state?

Thanks

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Dec 10, 2020

klukonin:

Hello.

Looks like this issue is related to 100 Mbit ethrenet mode and heavy traffic load.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant