Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#1190 - NETGEAR WNDR3800 USB LED trigger not work properly! #7425

Open
openwrt-bot opened this issue Nov 25, 2017 · 2 comments
Open

FS#1190 - NETGEAR WNDR3800 USB LED trigger not work properly! #7425

openwrt-bot opened this issue Nov 25, 2017 · 2 comments
Labels

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Nov 25, 2017

s10123:

When I plug USB device in USB port, USB is working。I can copy data to usb device. The USB LED show green。But when the data is copying to usb device, the usb led do not blink, just is always green. I select usb trigger and select usbport hub1 and port1. It does not blink too. It means trigger dont work.

model: NETGEAR WNDR3800
Firmware Version LEDE Reboot SNAPSHOT r5420-332438b / LuCI Master (git-17.328.04231-802d5b6)
Kernel Version 4.9.63

By the way, my device work properly in 15.05.1 and 14.07. When I flash LEGE, it have been found this problem.

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Nov 25, 2017

ffainelli:

I can confirm this happens on my Netgear WNDR4300 as well using kernel 4.4. Using a different type of trigger works fine though (e.g: netdev, timer etc.). It is not clear to me where the problem is coming from yet.

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Nov 26, 2017

ffainelli:

After chatting with Rafal it became clear that blinking on activity is not currently supported. I will try get that done.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant