Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#3009 - executable path /usr/sbin/hostapd does not match process path (/proc/exe) #7807

Closed
openwrt-bot opened this issue Apr 14, 2020 · 3 comments
Labels

Comments

@openwrt-bot
Copy link

openwrt-bot commented Apr 14, 2020

mtracy:

Built off trunk after the single instance hostapd commit. Seeing this error in logread, although the radio still comes up and works.

Tue Apr 14 14:43:18 2020 daemon.notice netifd: radio1 (980): WARNING (wireless_add_process): executable path /usr/sbin/hostapd does not match process path (/proc/exe)
Tue Apr 14 14:43:18 2020 daemon.notice netifd: radio1 (980): Command failed: Invalid argument

  • Fresh clone of trunk
  • Select target system (Atheros AR7xxx/AR9xxx) and target profile (Ubiquiti UAP Pro)
  • make defconfig
  • make menuconfig with the follow changes: compile with GCC9, full version of hostapd (hostapd-openssl), iw-full, ath9k dynack enabled
  • make

Sysupgraded unit using sysupgrade -n

root@OpenWrt-AP24:# logread
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.000000] Linux version 4.14.172 (matt@buildbox) (gcc version 9.3.0 (OpenWrt GCC 9.3.0 r12950-97af28d23e)) #0 Tue Apr 14 12:53:11 2020
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.000000] MyLoader: sysp=5a293295, boardp=7a2f369c, parts=4a2b3e1c
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] SoC: Atheros AR9344 rev 3
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Determined physical RAM map:
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] memory: 08000000 @ 00000000 (usable)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Tue Apr 14 14:43:07 2020 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Tue Apr 14 14:43:07 2020 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Zone ranges:
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Movable zone start for each node
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Early memory node ranges
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.000000] On node 0 totalpages: 32768
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 8053f510, node_mem_map 81000020
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.000000] Normal zone: 288 pages used for memmap
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x49c with crng_init=0
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.000000] Kernel command line: board=UAP-PRO mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2048k(kernel),13696k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) console=ttyS0,115200 rootfstype=squashfs noinitrd
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Memory: 123852K/131072K available (3879K kernel code, 197K rwdata, 916K rodata, 312K init, 207K bss, 7220K reserved, 0K cma-reserved)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] NR_IRQS: 51
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.008311] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.084943] pid_max: default: 32768 minimum: 301
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.090130] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.097195] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.107551] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.118055] futex hash table entries: 256 (order: -1, 3072 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.125057] NET: Registered protocol family 16
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.131186] MIPS: machine is Ubiquiti UniFi AP Pro
Tue Apr 14 14:43:07 2020 kern.warn kernel: [ 0.139536] registering PCI controller with io_map_base unset
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.401845] PCI host bridge to bus 0000:00
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.406265] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.413583] pci_bus 0000:00: root bus resource [io 0x0000]
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.419528] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.426746] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.435220] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
Tue Apr 14 14:43:07 2020 kern.err kernel: [ 0.435236] pci 0000:00:00.0: invalid calibration data
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.440744] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.440800] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.440889] pci 0000:00:00.0: supports D1
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.440900] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.441117] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.441146] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.448977] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.457311] clocksource: Switched to clocksource MIPS
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.463886] NET: Registered protocol family 2
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.469317] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.476748] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.483565] TCP: Hash tables configured (established 1024 bind 1024)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.490471] UDP hash table entries: 256 (order: 0, 4096 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.496701] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.503732] NET: Registered protocol family 1
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 0.508460] PCI: CLS 0 bytes, default 32
Tue Apr 14 14:43:07 2020 kern.warn kernel: [ 0.513909] Crashlog allocated RAM at address 0x3f00000
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.520936] workingset: timestamp_bits=14 max_order=15 bucket_order=1
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.533863] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.540121] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.562164] io scheduler noop registered
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.566341] io scheduler deadline registered (default)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.572132] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.579307] console [ttyS0] disabled
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.603202] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.612394] console [ttyS0] enabled
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.619822] bootconsole [early0] disabled
Tue Apr 14 14:43:07 2020 kern.warn kernel: [ 0.632788] m25p80 spi0.0: found mx25l12805d, expected m25p80
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.639495] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.644658] 7 cmdlinepart partitions found on MTD device spi0.0
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.650706] Creating 7 MTD partitions on "spi0.0":
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.655576] 0x000000000000-0x000000040000 : "u-boot"
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.662062] 0x000000040000-0x000000050000 : "u-boot-env"
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.669668] 0x000000050000-0x000000250000 : "kernel"
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.676115] 0x000000250000-0x000000fb0000 : "rootfs"
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.681983] mtd: device 3 (rootfs) set to be root filesystem
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.687818] 1 squashfs-split partitions found on MTD device rootfs
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.694108] 0x0000004d0000-0x000000fb0000 : "rootfs_data"
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.702341] 0x000000fb0000-0x000000ff0000 : "cfg"
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.708574] 0x000000ff0000-0x000001000000 : "EEPROM"
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 0.715757] 0x000000050000-0x000000fb0000 : "firmware"
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.723340] libphy: Fixed MDIO Bus: probed
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 0.741921] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 1.411624] libphy: ag71xx_mdio: probed
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 2.038720] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 2.050093] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 2.058051] NET: Registered protocol family 10
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 2.066735] Segment Routing with IPv6
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 2.070619] NET: Registered protocol family 17
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 2.075759] 8021q: 802.1Q VLAN Support v1.8
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 2.086274] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 2.094831] Freeing unused kernel memory: 312K
Tue Apr 14 14:43:07 2020 kern.warn kernel: [ 2.099375] This architecture does not have kernel memory protection.
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 2.567324] random: fast init done
Tue Apr 14 14:43:07 2020 user.info kernel: [ 2.841495] init: Console is alive
Tue Apr 14 14:43:07 2020 user.info kernel: [ 2.845188] init: - watchdog -
Tue Apr 14 14:43:07 2020 user.info kernel: [ 3.546227] kmodloader: loading kernel modules from /etc/modules-boot.d/

Tue Apr 14 14:43:07 2020 user.info kernel: [ 3.555362] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Tue Apr 14 14:43:07 2020 user.info kernel: [ 3.573183] init: - preinit -
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 4.529587] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 4.559273] random: procd: uninitialized urandom read (4 bytes read)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 5.558576] eth0: link up (1000Mbps/Full duplex)
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 5.563349] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 8.748854] jffs2: notice: (408) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (0 unchecked, 2 orphan) and 4 of xref (1 dead, 2 orphan) found.
Tue Apr 14 14:43:07 2020 user.info kernel: [ 8.765783] mount_root: switching to jffs2 overlay
Tue Apr 14 14:43:07 2020 kern.warn kernel: [ 8.781588] overlayfs: upper fs does not support tmpfile.
Tue Apr 14 14:43:07 2020 user.warn kernel: [ 8.792807] urandom-seed: Seeding with /etc/urandom.seed
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 9.014175] eth0: link down
Tue Apr 14 14:43:07 2020 user.info kernel: [ 9.030093] procd: - early -
Tue Apr 14 14:43:07 2020 user.info kernel: [ 9.033132] procd: - watchdog -
Tue Apr 14 14:43:07 2020 user.info kernel: [ 9.665304] procd: - watchdog -
Tue Apr 14 14:43:07 2020 user.info kernel: [ 9.668873] procd: - ubus -
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 9.723204] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 9.730207] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 9.736700] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Apr 14 14:43:07 2020 user.info kernel: [ 9.744236] procd: - init -
Tue Apr 14 14:43:07 2020 user.info kernel: [ 10.545037] kmodloader: loading kernel modules from /etc/modules.d/*
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 10.728779] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 10.736377] Backport generated by backports.git v5.4.27-1-0-gf6e8852f
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.902166] ath: EEPROM regdomain: 0x2a
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.902175] ath: EEPROM indicates we should expect a direct regpair map
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.902192] ath: Country alpha2 being used: US
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.902196] ath: Regpair used: 0x2a
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.916076] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 10.917903] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 10.924807] pci 0000:00:00.0: using irq 40 for pin 1
Tue Apr 14 14:43:07 2020 kern.warn kernel: [ 10.929917] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.941379] ath: EEPROM regdomain: 0x2a
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.941386] ath: EEPROM indicates we should expect a direct regpair map
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.941405] ath: Country alpha2 being used: US
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.941409] ath: Regpair used: 0x2a
Tue Apr 14 14:43:07 2020 kern.debug kernel: [ 10.953105] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Tue Apr 14 14:43:07 2020 kern.info kernel: [ 10.954911] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Tue Apr 14 14:43:07 2020 user.info kernel: [ 11.072354] urngd: v1.0.2 started.
Tue Apr 14 14:43:07 2020 user.info kernel: [ 11.127663] kmodloader: done loading kernel modules from /etc/modules.d/*
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 11.555280] random: crng init done
Tue Apr 14 14:43:07 2020 kern.notice kernel: [ 11.558793] random: 6 urandom warning(s) missed due to ratelimiting
Tue Apr 14 14:43:08 2020 daemon.info chronyd[717]: chronyd version 3.5 starting (+CMDMON +NTP +REFCLOCK -RTC +PRIVDROP -SCFILTER -SIGND +ASYNCDNS -SECHASH +IPV6 -DEBUG)
Tue Apr 14 14:43:11 2020 user.notice : Added device handler type: 8021ad
Tue Apr 14 14:43:11 2020 user.notice : Added device handler type: 8021q
Tue Apr 14 14:43:11 2020 user.notice : Added device handler type: macvlan
Tue Apr 14 14:43:11 2020 user.notice : Added device handler type: veth
Tue Apr 14 14:43:11 2020 user.notice : Added device handler type: bridge
Tue Apr 14 14:43:11 2020 user.notice : Added device handler type: Network device
Tue Apr 14 14:43:11 2020 user.notice : Added device handler type: tunnel
Tue Apr 14 14:43:13 2020 daemon.info procd: - init complete -
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.115062] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.122384] eth0: link up (1000Mbps/Full duplex)
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.127087] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.150915] br-lan: port 1(eth0.1) entered blocking state
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.156408] br-lan: port 1(eth0.1) entered disabled state
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.162333] device eth0.1 entered promiscuous mode
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.167200] device eth0 entered promiscuous mode
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.190557] br-lan: port 1(eth0.1) entered blocking state
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.196053] br-lan: port 1(eth0.1) entered forwarding state
Tue Apr 14 14:43:15 2020 kern.info kernel: [ 22.201991] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Interface 'lan' is enabled
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Interface 'lan' is setting up now
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Interface 'lan' is now up
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Interface 'loopback' is enabled
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Interface 'loopback' is now up
Tue Apr 14 14:43:15 2020 daemon.notice netifd: bridge 'br-lan' link is up
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Network device 'eth0' link is up
Tue Apr 14 14:43:15 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Network device 'lo' link is up
Tue Apr 14 14:43:15 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Apr 14 14:43:16 2020 kern.info kernel: [ 23.157753] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Apr 14 14:43:17 2020 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Tue Apr 14 14:43:17 2020 kern.info kernel: [ 24.187365] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Tue Apr 14 14:43:17 2020 kern.info kernel: [ 24.223711] br-lan: port 2(wlan1) entered blocking state
Tue Apr 14 14:43:17 2020 kern.info kernel: [ 24.229170] br-lan: port 2(wlan1) entered disabled state
Tue Apr 14 14:43:17 2020 kern.info kernel: [ 24.234861] device wlan1 entered promiscuous mode
Tue Apr 14 14:43:17 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Apr 14 14:43:17 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 80:2a:a8:55:11:08 and ssid "xxxx xxxxxxxxxxx"
Tue Apr 14 14:43:17 2020 authpriv.info dropbear[1167]: Not backgrounding
Tue Apr 14 14:43:18 2020 kern.info kernel: [ 25.045632] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Tue Apr 14 14:43:18 2020 kern.info kernel: [ 25.052295] br-lan: port 2(wlan1) entered blocking state
Tue Apr 14 14:43:18 2020 kern.info kernel: [ 25.057742] br-lan: port 2(wlan1) entered forwarding state
Tue Apr 14 14:43:18 2020 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Tue Apr 14 14:43:18 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Tue Apr 14 14:43:18 2020 daemon.notice netifd: radio1 (980): WARNING (wireless_add_process): executable path /usr/sbin/hostapd does not match process path (/proc/exe)
Tue Apr 14 14:43:18 2020 daemon.notice netifd: radio1 (980): Command failed: Invalid argument
Tue Apr 14 14:43:19 2020 user.notice root: ip link set dev wlan1 up
Tue Apr 14 14:43:19 2020 daemon.notice netifd: Network device 'wlan1' link is up
Tue Apr 14 14:43:45 2020 daemon.info chronyd[717]: Selected source 192.168.1.1
Tue Apr 14 14:43:45 2020 daemon.warn chronyd[717]: System clock wrong by 24.666339 seconds, adjustment started
Tue Apr 14 14:43:45 2020 daemon.warn chronyd[717]: System clock was stepped by 24.666339 seconds
Tue Apr 14 14:43:46 2020 authpriv.info dropbear[1229]: Child connection from 192.168.1.184:63193
Tue Apr 14 14:43:51 2020 authpriv.notice dropbear[1229]: Password auth succeeded for 'root' from 192.168.1.184:63193
root@OpenWrt-AP24:
#

@openwrt-bot
Copy link
Author

openwrt-bot commented Apr 15, 2020

mtracy:

config.buildinfo

@openwrt-bot
Copy link
Author

openwrt-bot commented Apr 15, 2020

mtracy:

manifest

@openwrt-bot
Copy link
Author

openwrt-bot commented Apr 15, 2020

mtracy:

.config

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

1 participant