Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#3482 - WNDR3700 - config changes do not survive reboot after 'Perform Reset' #8352

Open
openwrt-bot opened this issue Nov 30, 2020 · 1 comment
Labels
flyspray release/19.07

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Nov 30, 2020

_lsx:

Issue occurs on WNDR3700 v1
Image used openwrt-19.07.4-ath79-generic-netgear_wndr3700-squashfs-sysupgrade.bin

Steps:

1, Flash the above sysupgrade image.
2, Configure luci as required, all settings are saved as expected and survive any number of reboots as expected.
3, Use luci System/Backup Flash Firmware/Reset to Defaults (Perform Reset) to clear the current configuration.
4, Post reset any changes applied to config/settings within luci no longer survive a reboot. The luci configuration returns to the default post-flash position after each reboot.

Issue is reproducible.

Workaround is to reflash and avoid using the reset functionality.

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Nov 30, 2020

_lsx:

Sorry for the task title, hopefully it gives someone a laugh.

Title should really be config changes do not survive reboots after using 'Perform Reset'

@aparcar aparcar added the release/19.07 label Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray release/19.07
Projects
None yet
Development

No branches or pull requests

2 participants