Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and
privacy statement. We’ll occasionally send you account related emails.
Already on GitHub?
to your account
Supply the following if possible:
Device: Banana Pi M2 Ultra
OpenWrt: Snapshot image from https://downloads.openwrt.org/snapshots/targets/sunxi/cortexa7/
uncompressed downloaded file
dd to TF card
Put this TF card into board's TF slot
Using usb-serial converter connects to its debug uart pins
Power on M2U board
Watch the boot log
[ 1.376746] libphy: stmmac: probed
[ 1.389128] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.394664] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.402844] mmc0: new SDHC card at address 0001
[ 1.408341] mmcblk0: mmc0:0001 SD8GB 7.28 GiB
[ 1.414442] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.419981] mmcblk0: p1 p2
[ 1.426302] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
U-Boot SPL 2020.04 (Jul 20 2021 - 03:16:48 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
The text was updated successfully, but these errors were encountered:
@srdgame try to reproduce it and if the problem still exists ping me here to reopen it, thanks
Sorry, something went wrong.
No branches or pull requests