Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#4075 - Cpufreq is missing on kirkwood target, so the cpu is stuck at lowest frequency #9057

Open
openwrt-bot opened this issue Oct 10, 2021 · 0 comments
Labels
flyspray kernel release/21.02

Comments

@openwrt-bot
Copy link

openwrt-bot commented Oct 10, 2021

EdoaLive:

Hello, I installed openwrt on a Zyxel NSA-310 device. Everything seems good but when I went to test the performance it was not so good.
So I noticed that the cpu frequency is stuck on 200MHz and cpufreq is missing (also can't find it as a kmod package).

I am running on original u-boot because of a bad block and the wiki suggested not to flash it. Maybe openwrt's u-boot has a workaround on this or there is some setting to apply on boot?

BTW I think the wiki does not include a safer, less invasive method as this device can boot entirely from usb without flashing anything, but to do so you need to have a kernel/initramfs w/usbstorage included.

I might try to compile openwrt from sources to include cpufreq. Should I then submit a pull request or a patch?

@aparcar aparcar added release/21.02 kernel labels Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray kernel release/21.02
Projects
None yet
Development

No branches or pull requests

2 participants