Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#4229 - MT7621 Wireless default error #9211

Open
openwrt-bot opened this issue Jan 19, 2022 · 3 comments
Open

FS#4229 - MT7621 Wireless default error #9211

openwrt-bot opened this issue Jan 19, 2022 · 3 comments
Labels
flyspray release/21.02

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Jan 19, 2022

jackadam:

Supply the following if possible:

  • Device problem occurs on

  • Software versions of OpenWrt/LEDE release, packages, etc.

  • Steps to reproduce

  • Device problem occurs on Phicomm K2P

  • Software versions of OpenWrt/LEDE release OpenWrt 21.02.1 r16325-88151b8303 / LuCI openwrt-21.02 branch git-21.295.67054-13df80d

  • Steps to reproduce just flash openwrt-21.02.1-ramips-mt7621-phicomm_k2p-squashfs-sysupgrade.bin

/etc/config/wireless

config wifi-device 'radio0'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path '1e140000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
option htmode 'VHT80'
option disabled '1'

config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'none'

config wifi-device 'radio1'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path '1e140000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0+1'
option htmode 'VHT80'
option disabled '1'

config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'none'

It's two 802.11nac,no have 802.11bg.

in luci if you enable two wifi ,they all cheange to 802.11nac.

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jan 23, 2022

nicefile:

please post output from command
iw phy

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Jan 24, 2022

jackadam:

Wiphy phy1 wiphy index: 1 max # scan SSIDs: 4 max scan IEs length: 543 bytes max # sched scan SSIDs: 10 max # match sets: 16 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports AP-side u-APSD. Device supports T-DLS. Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * mesh point * P2P-client * P2P-GO Band 2: Capabilities: 0x1ff RX LDPC HT20/HT40 SM Power Save disabled RX Greenfield RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: No restriction (0x00) HT TX/RX MCS rate indexes supported: 0-15 VHT Capabilities (0x338001b0): Max MPDU length: 3895 Supported Channel Width: neither 160 nor 80+80 RX LDPC short GI (80 MHz) TX STBC RX antenna pattern consistency TX antenna pattern consistency VHT RX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT RX highest supported: 0 Mbps VHT TX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT TX highest supported: 0 Mbps Frequencies: * 5180 MHz [36] (9.0 dBm) * 5200 MHz [40] (9.0 dBm) * 5220 MHz [44] (9.0 dBm) * 5240 MHz [48] (9.0 dBm) * 5260 MHz [52] (9.0 dBm) (no IR, radar detection) * 5280 MHz [56] (9.0 dBm) (no IR, radar detection) * 5300 MHz [60] (9.0 dBm) (no IR, radar detection) * 5320 MHz [64] (9.0 dBm) (no IR, radar detection) * 5500 MHz [100] (9.0 dBm) (no IR, radar detection) * 5520 MHz [104] (9.0 dBm) (no IR, radar detection) * 5540 MHz [108] (9.0 dBm) (no IR, radar detection) * 5560 MHz [112] (9.0 dBm) (no IR, radar detection) * 5580 MHz [116] (9.0 dBm) (no IR, radar detection) * 5600 MHz [120] (9.0 dBm) (no IR, radar detection) * 5620 MHz [124] (9.0 dBm) (no IR, radar detection) * 5640 MHz [128] (9.0 dBm) (no IR, radar detection) * 5660 MHz [132] (9.0 dBm) (no IR, radar detection) * 5680 MHz [136] (9.0 dBm) (no IR, radar detection) * 5700 MHz [140] (9.0 dBm) (no IR, radar detection) * 5720 MHz [144] (9.0 dBm) (no IR, radar detection) * 5745 MHz [149] (9.0 dBm) (no IR) * 5765 MHz [153] (9.0 dBm) (no IR) * 5785 MHz [157] (9.0 dBm) (no IR) * 5805 MHz [161] (9.0 dBm) (no IR) * 5825 MHz [165] (9.0 dBm) (no IR) * 5845 MHz [169] (disabled) * 5865 MHz [173] (disabled) valid interface combinations: * #{ IBSS } <= 1, #{ managed, AP, mesh point, P2P-client, P2P-GO } <= 16, total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }
HT Capability overrides:
	 * MCS: ff ff ff ff ff ff ff ff ff ff
	 * maximum A-MSDU length
	 * supported channel width
	 * short GI for 40 MHz
	 * max A-MPDU length exponent
	 * min MPDU start spacing
max # scan plans: 1
max scan plan interval: 10
max scan plan iterations: 0
Supported extended features:
	* [ VHT_IBSS ]: VHT-IBSS
	* [ RRM ]: RRM
	* [ SET_SCAN_DWELL ]: scan dwell setting
	* [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
	* [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
	* [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
	* [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
	* [ AQL ]: Airtime Queue Limits (AQL)
	* [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
	* [ DEL_IBSS_STA ]: deletion of IBSS station support
	* [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
	* [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support

Wiphy phy0
wiphy index: 0
max # scan SSIDs: 4
max scan IEs length: 2304 bytes
max # sched scan SSIDs: 0
max # match sets: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports AP-side u-APSD.
Device supports T-DLS.
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x3 RX 0x3
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* mesh point
* P2P-client
* P2P-GO
Band 1:
Capabilities: 0x1ff
RX LDPC
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: No restriction (0x00)
HT TX/RX MCS rate indexes supported: 0-15
Frequencies:
* 2412 MHz [1] (11.0 dBm)
* 2417 MHz [2] (11.0 dBm)
* 2422 MHz [3] (11.0 dBm)
* 2427 MHz [4] (11.0 dBm)
* 2432 MHz [5] (11.0 dBm)
* 2437 MHz [6] (11.0 dBm)
* 2442 MHz [7] (11.0 dBm)
* 2447 MHz [8] (11.0 dBm)
* 2452 MHz [9] (11.0 dBm)
* 2457 MHz [10] (11.0 dBm)
* 2462 MHz [11] (11.0 dBm)
* 2467 MHz [12] (11.0 dBm) (no IR)
* 2472 MHz [13] (11.0 dBm) (no IR)
* 2484 MHz [14] (11.0 dBm) (no IR)
Band 2:
Capabilities: 0x1ff
RX LDPC
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: No restriction (0x00)
HT TX/RX MCS rate indexes supported: 0-15
VHT Capabilities (0x338001b0):
Max MPDU length: 3895
Supported Channel Width: neither 160 nor 80+80
RX LDPC
short GI (80 MHz)
TX STBC
RX antenna pattern consistency
TX antenna pattern consistency
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 0 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 0 Mbps
Frequencies:
* 5180 MHz [36] (12.0 dBm)
* 5200 MHz [40] (12.0 dBm)
* 5220 MHz [44] (12.0 dBm)
* 5240 MHz [48] (12.0 dBm)
* 5260 MHz [52] (12.0 dBm) (no IR, radar detection)
* 5280 MHz [56] (12.0 dBm) (no IR, radar detection)
* 5300 MHz [60] (12.0 dBm) (no IR, radar detection)
* 5320 MHz [64] (12.0 dBm) (no IR, radar detection)
* 5500 MHz [100] (12.0 dBm) (no IR, radar detection)
* 5520 MHz [104] (12.0 dBm) (no IR, radar detection)
* 5540 MHz [108] (12.0 dBm) (no IR, radar detection)
* 5560 MHz [112] (12.0 dBm) (no IR, radar detection)
* 5580 MHz [116] (12.0 dBm) (no IR, radar detection)
* 5600 MHz [120] (12.0 dBm) (no IR, radar detection)
* 5620 MHz [124] (12.0 dBm) (no IR, radar detection)
* 5640 MHz [128] (12.0 dBm) (no IR, radar detection)
* 5660 MHz [132] (12.0 dBm) (no IR, radar detection)
* 5680 MHz [136] (12.0 dBm) (no IR, radar detection)
* 5700 MHz [140] (12.0 dBm) (no IR, radar detection)
* 5720 MHz [144] (12.0 dBm) (no IR, radar detection)
* 5745 MHz [149] (12.0 dBm) (no IR)
* 5765 MHz [153] (12.0 dBm) (no IR)
* 5785 MHz [157] (12.0 dBm) (no IR)
* 5805 MHz [161] (12.0 dBm) (no IR)
* 5825 MHz [165] (12.0 dBm) (no IR)
* 5845 MHz [169] (disabled)
* 5865 MHz [173] (disabled)
valid interface combinations:
* #{ IBSS } <= 1, #{ managed, AP, mesh point, P2P-client, P2P-GO } <= 16,
total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz }

HT Capability overrides:
	 * MCS: ff ff ff ff ff ff ff ff ff ff
	 * maximum A-MSDU length
	 * supported channel width
	 * short GI for 40 MHz
	 * max A-MPDU length exponent
	 * min MPDU start spacing
max # scan plans: 1
max scan plan interval: 0
max scan plan iterations: 0
Supported extended features:
	* [ VHT_IBSS ]: VHT-IBSS
	* [ RRM ]: RRM
	* [ SET_SCAN_DWELL ]: scan dwell setting
	* [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
	* [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
	* [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
	* [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
	* [ AQL ]: Airtime Queue Limits (AQL)
	* [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
	* [ DEL_IBSS_STA ]: deletion of IBSS station support
	* [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
	* [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Feb 7, 2022

jackadam:

anyone help?

@aparcar aparcar added the release/21.02 label Feb 22, 2022
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
flyspray release/21.02
Projects
None yet
Development

No branches or pull requests

2 participants