Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

FS#4237 - beagle bone black boot failed #9218

Closed
openwrt-bot opened this issue Jan 23, 2022 · 3 comments
Closed

FS#4237 - beagle bone black boot failed #9218

openwrt-bot opened this issue Jan 23, 2022 · 3 comments
Labels

Comments

@openwrt-bot
Copy link

@openwrt-bot openwrt-bot commented Jan 23, 2022

syabyr:

device:beagle bone black
kernel boot failed:

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.154 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16325-88151b8303)) #0 SMP Sun Oct 24 09:01:35 2021
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x9ec00000
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon)
[ 0.000000] percpu: Embedded 15 pages/cpu s31116 r8192 d22132 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootwait
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 488620K/522240K available (8290K kernel code, 333K rwdata, 1528K rodata, 1024K init, 302K bss, 17236K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
[ 0.000000] random: get_random_bytes called from 0xc0b00bbc with crng_init=0
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000039] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000049] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000550] timer_probe: no matching timers found
[ 0.000681] Console: colour dummy device 80x30
[ 0.000744] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.089202] pid_max: default: 32768 minimum: 301
[ 0.089391] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.089406] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.090350] CPU: Testing write buffer coherency: ok
[ 0.090424] CPU0: Spectre v2: using BPIALL workaround
[ 0.090832] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.091525] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.091691] rcu: Hierarchical SRCU implementation.
[ 0.092003] smp: Bringing up secondary CPUs ...
[ 0.092014] smp: Brought up 1 node, 1 CPU
[ 0.092023] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[ 0.092030] CPU: All CPU(s) started in SVC mode.
[ 0.103066] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.103293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.103318] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.104436] pinctrl core: initialized pinctrl subsystem
[ 0.105843] NET: Registered protocol family 16
[ 0.107780] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.133304] l3-aon-clkctrl:0000:0: failed to disable
[ 0.135292] cpuidle: using governor ladder
[ 0.135307] cpuidle: using governor menu
[ 0.203217] edma 49000000.edma: TI EDMA DMA engine driver
[ 0.207828] SCSI subsystem initialized
[ 0.221787] usbcore: registered new interface driver usbfs
[ 0.221866] usbcore: registered new interface driver hub
[ 0.221932] usbcore: registered new device driver usb
[ 0.222648] pps_core: LinuxPPS API ver. 1 registered
[ 0.222661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.222688] PTP clock support registered
[ 0.222918] Advanced Linux Sound Architecture Driver Initialized.
[ 0.223024] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 0.227741] clocksource: Switched to clocksource timer1
[ 0.228025] VFS: Disk quotas dquot_6.6.0
[ 0.228103] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.232596] thermal_sys: Registered thermal governor 'fair_share'
[ 0.232605] thermal_sys: Registered thermal governor 'step_wise'
[ 0.232622] thermal_sys: Registered thermal governor 'user_space'
[ 0.233173] NET: Registered protocol family 2
[ 0.233387] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.234015] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.234047] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.234090] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.234149] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.234249] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.234273] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.234465] NET: Registered protocol family 1
[ 0.243484] RPC: Registered named UNIX socket transport module.
[ 0.243506] RPC: Registered udp transport module.
[ 0.243512] RPC: Registered tcp transport module.
[ 0.243518] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.245642] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.256299] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.257846] NFS: Registering the id_resolver key type
[ 0.257899] Key type id_resolver registered
[ 0.257906] Key type id_legacy registered
[ 0.257960] jffs2: version 2.2 (NAND) (SUMMARY) (LZO) (LZMA) (RTIME) (RUBIN) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.299463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.303740] OMAP GPIO hardware version 0.1
[ 0.339587] pinctrl-single 44e10800.pinmux: 142 pins, size 568
[ 0.342721] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.345685] omap_uart 44e09000.serial: no wakeirq for uart0
[ 0.345766] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 29, base_baud = 3000000) is a OMAP UART0
[ 0.964952] printk: console [ttyO0] enabled
[ 0.984598] brd: module loaded
[ 0.991748] loop: module loaded
[ 0.996221] Loading iSCSI transport class v2.0-870.
[ 1.009284] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.017998] libphy: Fixed MDIO Bus: probed
[ 1.077692] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ 1.085743] libphy: 4a101000.mdio: probed
[ 1.091425] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 1.101179] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ 1.107865] cpsw 4a100000.ethernet: ALE Table size 1024
[ 1.113840] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies)
[ 1.121444] cpsw 4a100000.ethernet: Detected MACID = d0:39:72:18:7e:df
[ 1.130700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.137548] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.145901] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
[ 1.164143] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 1.185272] omap_rtc 44e3e000.rtc: registered as rtc0
[ 1.191456] i2c /dev entries driver
[ 1.196624] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.206725] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
[ 1.215938] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 1.272647] omap_hsmmc 47810000.mmc: RX DMA channel request failed
[ 1.283060] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.290000] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 1.296388] omap-aes 53500000.aes: will run requests pump with realtime priority
[ 1.306328] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 1.319478] davinci-mcasp 48038000.mcasp: IRQ common not found
[ 1.332861] NET: Registered protocol family 10
[ 1.341140] Segment Routing with IPv6
[ 1.345162] NET: Registered protocol family 17
[ 1.349962] NET: Registered protocol family 15
[ 1.354678] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.368332] 8021q: 802.1Q VLAN Support v1.8
[ 1.372756] Key type dns_resolver registered
[ 1.377329] ThumbEE CPU extension supported.
[ 1.381840] Registering SWP/SWPB emulation handler
[ 1.386859] omap_voltage_late_init: Voltage driver support not added
[ 1.393539] sr_dev_init: Unknown instance smartreflex0
[ 1.399263] SmartReflex Class3 initialized
[ 1.421174] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.433890] mmc0: new high speed SDHC card at address aaaa
[ 1.440872] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[ 1.447431] mmcblk0: p1 p2
[ 1.460191] random: fast init done
[ 1.473464] mmc1: new high speed MMC card at address 0001
[ 1.481731] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
[ 1.486778] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 1.493389] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 1.499783] mmcblk1rpmb: mmc1:0001 MMC04G partition 3 128 KiB, chardev (246:0)
[ 1.508096] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 1.514222] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.522631] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 1.529179] 8<--- cut here ---
[ 1.532387] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1.540913] pgd = (ptrval)
[ 1.543746] [00000008] *pgd=00000000
[ 1.547496] Internal error: Oops: 5 [#1] SMP ARM
[ 1.552325] Modules linked in:
[ 1.555527] CPU: 0 PID: 1108 Comm: kworker/0:3 Not tainted 5.4.154 #0
[ 1.562268] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 1.568652] Workqueue: events 0xc05aba90
[ 1.572757] PC is at 0xc06b4294
[ 1.576040] LR is at 0xc06a4968
[ 1.579325] pc : [] lr : [] psr: a0000013
[ 1.585884] sp : dd96dd88 ip : 00000002 fp : ffffe000
[ 1.591351] r10: c0c96ec4 r9 : c0c04f08 r8 : ddad2400
[ 1.596819] r7 : 00000000 r6 : de035040 r5 : ddad2410 r4 : de034040
[ 1.603652] r3 : ddad2210 r2 : c09ed4a0 r1 : 00000200 r0 : ddad2200
[ 1.610486] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 1.617955] Control: 10c5387d Table: 80004019 DAC: 00000051
[ 1.623967] Process kworker/0:3 (pid: 1108, stack limit = 0x(ptrval))
[ 1.630708] Stack: (0xdd96dd88 to 0xdd96e000)
[ 1.635269] dd80: c0c04f08 c06831fc de034040 c0c96ec0 de035040 c0c96ebc
[ 1.643833] dda0: ddad2400 c06a4968 00000a20 00000000 c0c971f4 dfdeea38 a0000013 ddad2410
[ 1.652395] ddc0: de27ba00 00000038 c0c96ec0 c0c96eb8 00000000 c04fb214 00000000 dfdee528
[ 1.660957] dde0: 00000000 00000001 00000001 c071214c dd488b40 dd488b40 c0c271f8 c02d48d0
[ 1.669522] de00: dd488b40 00000000 00000000 c0a35c48 00000001 c02d4a7c c0c3fbc0 00000006
[ 1.678087] de20: dda98300 c02d46fc 00000000 dd488b40 ddad05a0 ddad05a0 dd488b40 0ebe159f
[ 1.686651] de40: c0a35c48 ddad2410 00000000 c0c3fbc0 00000000 00000000 c0c3fbc0 00000006
[ 1.695216] de60: ffffe000 c05adf3c c0c9482c ddad2410 c0c94824 00000000 00000000 c05ac51c
[ 1.703780] de80: ddad2410 c0c3fbc0 c05ac9b0 00000001 00000000 00000000 00000000 c05ac800
[ 1.712344] dea0: c0c3fbc0 dd96dee8 ddad2410 00000000 dd96dee8 c05ac9b0 00000001 00000000
[ 1.720908] dec0: 00000000 00000000 ffffe000 c05aaa54 de008b6c de2e16b8 ddad2410 ddad2454
[ 1.729472] dee0: c0c37cd0 c05ac2b4 ddad2410 00000001 c0c37a54 ddad2410 ddad2410 c0c37cd0
[ 1.738035] df00: dfdc5c00 c05ab668 ddad2410 c0c37a4c c0c37a54 c05abaf8 c0c37aa0 dd8ea500
[ 1.746598] df20: dfdc29c0 c0145dd0 00000008 c0c03d00 dd8ea500 dd8ea514 dfdc29c0 00000008
[ 1.755163] df40: c0c03d00 dfdc29d8 dfdc29c0 c01462d4 c0c1de30 c092f0fc ffffe000 dd8ea500
[ 1.763727] df60: c014602c dd8e6b80 dd8e6c80 00000000 dd96c000 dd8ea500 c014602c de071eac
[ 1.772291] df80: dd8e6b9c c014b7c0 00000015 dd8e6c80 c014b674 00000000 00000000 00000000
[ 1.780854] dfa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[ 1.789417] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.797979] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 1.806549] Function entered at [] from []
[ 1.812654] Function entered at [] from []
[ 1.818759] Function entered at [] from []
[ 1.824861] Function entered at [] from []
[ 1.830964] Function entered at [] from []
[ 1.837065] Function entered at [] from []
[ 1.843167] Function entered at [] from []
[ 1.849270] Function entered at [] from []
[ 1.855372] Function entered at [] from []
[ 1.861477] Function entered at [] from []
[ 1.867579] Function entered at [] from []
[ 1.873683] Function entered at [] from []
[ 1.879785] Exception stack(0xdd96dfb0 to 0xdd96dff8)
[ 1.885071] dfa0: 00000000 00000000 00000000 00000000
[ 1.893632] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.902193] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.909122] Code: e34c209e e5953024 e2430010 e5937040 (e5978008)
[ 1.915543] ---[ end trace b9a3348b3cd5e5c5 ]---
[ 1.920392] Kernel panic - not syncing: Fatal exception
[ 1.925869] Rebooting in 1 seconds..

@openwrt-bot
Copy link
Author

@openwrt-bot openwrt-bot commented Feb 1, 2022

blauggh:

I have duplicated the same failure trying to use 21.02.1 on my Beagle Bone Black. I tried both the squashfs and ext4 images, and both failed the same way.

19.07.8 (at least the squashfs image; I didn't evaluate ext4) boots normally.

I also tried the squashfs snapshot build (as of today, Feb 1 2022), which also boots normally.

@jow-
Copy link
Contributor

@jow- jow- commented Feb 20, 2022

Duplicate of #9217

@jow- jow- marked this as a duplicate of #9217 Feb 20, 2022
@jow- jow- closed this as completed Feb 20, 2022
@ynezz
Copy link
Member

@ynezz ynezz commented Feb 21, 2022

Probably fixed in 21.0.2, if not report here #5054

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Projects
None yet
Development

No branches or pull requests

3 participants