mediatek/filogic: add Keenetic KN-3811 support #17135
Merged
+390
−0
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
github-actions
bot
added
the
target/mediatek
Linaro1985
force-pushed
the
main_kn3811
branch
2 times, most recently
from
3da61b1 to
e858e71
Compare
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Vladdrako
pushed a commit
to Vladdrako/openwrt
that referenced
this pull request
Dec 11, 2024
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
vincejv
pushed a commit
to vincejv/openwrt
that referenced
this pull request
Dec 14, 2024
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
vincejv
pushed a commit
to vincejv/openwrt
that referenced
this pull request
Dec 14, 2024
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
rmandrad
pushed a commit
to rmandrad/openwrt
that referenced
this pull request
Dec 30, 2024
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
M3m3M4n
pushed a commit
to M3m3M4n/openwrt
that referenced
this pull request
Feb 16, 2025
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Linaro1985
added a commit
to Linaro1985/openwrt
that referenced
this pull request
Feb 21, 2025
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d087a79)
Linaro1985
added a commit
to Linaro1985/openwrt
that referenced
this pull request
Feb 26, 2025
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d087a79)
Linaro1985
added a commit
to Linaro1985/openwrt
that referenced
this pull request
Feb 26, 2025
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d087a79)
hauke
pushed a commit
to Linaro1985/openwrt
that referenced
this pull request
Feb 26, 2025
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 (cherry picked from commit d087a79) Link: openwrt#18055 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
liudf0716
pushed a commit
to liudf0716/chawrt
that referenced
this pull request
Feb 28, 2025
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt/openwrt#17135 (cherry picked from commit d087a79) Link: openwrt/openwrt#18055 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit d7d560b84bebf4e194a487b2a729dc5814a34053)
maurerr
pushed a commit
to maurerr/openwrt
that referenced
this pull request
Apr 9, 2025
Specification: * Mediatek MT7981BA * 256 MB SPI-NAND * 512 MB DDR4 RAM * MT7976CN DBDC AX Wi-Fi * MediaTek MT7531AE (3x LAN Gigabit ports) + Internal Gbe Phy (1x WAN Gigabit port) * 4x LED (power, internet, fn, wifi) * 3x buttons (wps, fn, reset) * 1x USB 3.0 port Serial Interface: * 3 Pins GND, RX, TX * Settings: 115200, 8N1 Notes: * The device supports dual boot mode * Fn led reassigned to wlan 2.4 Flash instruction: The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24 and tftp server. 2. Rename "openwrt-mediatek-filogic-keenetic_kn-3811-squashfs-factory.bin" to "KN-3811_recovery.bin" and place it in tftp server directory. 3. Connect PC with ethernet port, press the reset button, power up the device and keep button pressed until status led start blinking. 4. Device will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> Link: openwrt#17135 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
I wish there was an openwrt version on the kn-3810 too |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Specification:
Serial Interface:
Notes:
Flash instruction:
The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot: