Permalink
Fetching contributors…
Cannot retrieve contributors at this time
117 lines (80 sloc) 4.07 KB

Installing and Managing Relays

To effectively route commands to Relay, we need to inform Cog of each Relay and configure each Relay to communicate with Cog via the message bus.

Configuring A New Relay

Cog needs at least one Relay in order to deploy command bundles and execute commands. Configuring Cog to know about a new Relay instance is a simple three step process.

  1. Pick a secret word or phrase shared between Cog and the new Relay instance. Cog’s API refers to this secret as a token.
  2. Use cogctl to tell Cog about the Relay and its secret.

Configuring a new relay.

You'll need to create an ID for your relay (a UUID), as well as create a shared secret (a "token") and then give these to Cog:

$ cogctl relay create my_new_relay bd03d7f0-b670-4721-9121-c23e62583e49 "my fancy sekrit"
  1. Use the ID and token from step #2 to start the Relay instance.

Relay starting up.

$ RELAY_ID=bd03d7f0-b670-4721-9121-c23e62583e49 RELAY_COG_TOKEN="my fancy sekrit" relay
INFO[2016-04-18T14:42:57-04:00] Loaded configuration file ./cog_relay.conf.
INFO[2016-04-18T14:42:57-04:00] Relay f8e3ead2-57e0-4fb2-81e9-24bf6c104202 is initializing.
INFO[2016-04-18T14:42:57-04:00] Docker execution engine enabled.
INFO[2016-04-18T14:42:57-04:00] Native execution engine enabled.
INFO[2016-04-18T14:42:57-04:00] Verifying Docker registry credentials.
INFO[2016-04-18T14:42:58-04:00] Docker configuration verified.
INFO[2016-04-18T14:42:58-04:00] Started 8 workers.
INFO[2016-04-18T14:43:00-04:00] Connected to Cog host 10.10.2.12.
INFO[2016-04-18T14:43:00-04:00] Refreshing bundles and related assets every 30s.
INFO[2016-04-18T14:43:00-04:00] Cleaning up expired Docker assets every 5m0s.
INFO[2016-04-18T14:43:00-04:00] Refreshing command bundles.
INFO[2016-04-18T14:43:00-04:00] Bundle refresh complete.
INFO[2016-04-18T14:43:00-04:00] Relay f8e3ead2-57e0-4fb2-81e9-24bf6c104202 ready.

A fully commented example relay.conf file can be found here.

Relays & Relay Groups

Once a Relay has been created it can be assigned to one or more relay groups. Relay groups are merely named groups of Relays used to organize many Relays into logical groupings.

Note

You can read about how Cog uses relay groups to simplify command bundle deployment in :doc:`managing_bundles`.

No relay groups are defined when Cog is first installed so you’ll need to use cogctl to create at least one.

Creating a relay group.

$ cogctl relay-group create my_relay_group
Created relay group 'my_relay_group'

You can also create a relay group and assign Relays to it in a single command, too.

Creating a relay group with members.

$ cogctl relay-groups create my_newer_group my_new_relay
Created relay group 'my_newer_group'
Relay group 'my_newer_group' has the following relay members: my_new_relay

Members can be added or removed from a relay group at any time with cogctl 's relay-group add and relay-group remove actions.

Adding and removing group members.

$ cogctl relay-group add my_relay_group my_new_relay
Relay group 'my_relay_group' has the following relay members: my_new_relay, my_other_relay
$ cogctl relay-group remove my_relay_group my_other_relay
Relay group 'my_relay_group' has the following relay members: my_new_relay

Finally, you can view a detailed description of a relay group with cogctl 's relay-group info action.

Viewing a relay group.

$ cogctl relay-group info my_relay_group
Name           my_relay_group
ID             c3d29691-dc5b-4adf-a88b-53aff0e2bfa4
Creation Time  2016-04-19T18:55:52Z

Relays
NAME   ID
my_new_relay  f8e3ead2-57e0-4fb2-81e9-24bf6c104202
$

Now you are ready to add :doc:`managing_bundles` to your relays in order to execute your installed commands.