stuck in reboot loop, after flashing using nRT Toolbox and newest FW #2696
Replies: 9 comments
-
Posted at 2021-04-10 by Robin Sat 2021.04.10 Seems to be similar issue to what was reported yesterday (2021.04.09): Temporarily switch back to a previous version?
|
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-04-10 by WilliamV ok I tried the version 2v07 and I am still stuck at booting...BTN1 = reboot |
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-04-11 by Robin
So, it appears to be code other than that of the firmware itself. Have all four scenarios been tried beneath this heading: 'Powering-off' and especially heading: 'Resetting without loading any code'
It would be of great help to know what was being worked on just prior, that is different enough |
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-04-11 by WilliamV to be fair, I have only repeatedly tried v08 and v07, I would be happy for the solution, but have not tried others yet. |
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-04-12 by @gfwilliams Hi! Does the watch actually show I don't think this is related to that other post, as you're using standard 2v08 firmware. And do you know what firmware your watch had before? Was it working ok then, or were there some issues before you updated the firmware? What happens if you keep holding BTN1? Can you eventually get to a screen that shows the Bangle.js logo? If so, go to the app loader, and do Also, just to check, where are you getting your firmware from? It is possible to install other firmwares (MDBT42/Puck.js/Pixl.js) which would cause the kind of problem you're seeing - to fix that all you'd have to do is install the Bangle.js one |
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-04-16 by WilliamV The watch was working before. |
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-04-16 by WilliamV I have been getting the Bangle.js firmware from here. And yes I could have read the DFU thing badly sorry! It may have said the version number. The watch strains my vision even with reading glasses lol that is a bit funny, I'm sorry if I misread! |
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-04-16 by @gfwilliams When you say 'from here', where do you mean? Just to avoid doubt, please can you try downloading this file and flashing that? |
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-07-23 by c.l Hello @williamv I believe I'm currently in the same boat as you and have outlined my issues and troubleshooting in a new post: I'm wondering if you managed to solve the issue or make any progress. |
Beta Was this translation helpful? Give feedback.
-
Posted at 2021-04-10 by WilliamV
I have flashed the Bangle.js twice with the newest FW, espruino2v08
Now the watch boots to
FW RESET
DFU ZYDS
BOOTING...
BTN1 = REBOOT
each attempt to reboot just brings up this screen, or one with WATCHDOG instead of FW RESET
How can I get out of this boot loop?
Beta Was this translation helpful? Give feedback.
All reactions