What is the latest espruino version that works with hy 2.4 boards? #3563
Replies: 8 comments
-
Posted at 2014-02-01 by Serge_K Nevermind, I've found the working one.
|
Beta Was this translation helpful? Give feedback.
-
Posted at 2014-02-03 by @gfwilliams Does the version from www.espruino.com/Download not work? Thanks for letting us know about OneWire - That's a bit strange, I hadn't noticed problems on the Espruino Board (and it's basically the same chip inside). |
Beta Was this translation helpful? Give feedback.
-
Posted at 2014-02-03 by Serge_K The version I use is a bit outdated, so this issue with onewire may very well be fixed in later versions. Gordon, I know that hy boards are unsupported officially but but I already have one so I have a question - what it takes to switch on and off the display led backlight on a hy 2.4 board, is it theoretically possible with espruino? Can I get away with some SPI commands? Thank you for your work, js on hardware is awesome! |
Beta Was this translation helpful? Give feedback.
-
Posted at 2014-02-03 by @gfwilliams Hi Serge, I just looked at the schematics, and the LED for the backlight is hard-wired. You'd have to actually change the board if you wanted to turn it on and off... |
Beta Was this translation helpful? Give feedback.
-
Posted at 2014-02-03 by Serge_K Eh, you can't have it all. |
Beta Was this translation helpful? Give feedback.
-
Posted at 2014-02-04 by Harry_T Hi Serge, Harry |
Beta Was this translation helpful? Give feedback.
-
Posted at 2014-02-04 by Serge_K Hi, this is the version I settled on: |
Beta Was this translation helpful? Give feedback.
-
Posted at 2014-02-04 by Harry_T Serge - many many thanks - that is about 300 times better! Best regards, Harry |
Beta Was this translation helpful? Give feedback.
-
Posted at 2014-02-01 by Serge_K
And where can I get it?
Thanks!
Beta Was this translation helpful? Give feedback.
All reactions