Connection Problem #5504
Replies: 1 comment
-
Posted at 2016-06-18 by Wilberforce Disconnect usb and plug it in again then from the web ide set the serial speed to 115200 and connect. Posted at 2016-06-18 by Filip I have already done what you said couple of times but still IDE shows me an error saying "connection failed!" Posted at 2016-06-19 by JumJum Try to connect with 57600, which is the default baudrate for first steps in Espruino. Posted at 2016-06-19 by Filip I tried the baud rate 57600 unfortunately with no success :( In the meantime; I played with arduino IDE and everything is working. I do not really understand why I can't get Espruino worked, which is a little bit discouraging...
Update : |
Beta Was this translation helpful? Give feedback.
-
Posted at 2016-06-17 by Filip
Hi All,
I have successfully flashed the latest version (1v85) of Espruino and result can be found below. However; I can not connect to my nodeMCU either using Espruino Web IDE or with this command "screen /dev/ttyUSB0 115200".
When I try screen command I seen no error it just says "[screen is terminating]".
Does anyone have an idea what might be a problem?
Beta Was this translation helpful? Give feedback.
All reactions