Espruino JavaScript
Battery only charging until 60 -70% #6756
Replies: 1 comment
-
|
Posted at 2024-04-09 by @gfwilliams Hi - have you tried doing a backup, updating your firmware, and then doing a factory reset? It is possible that you've got something running in the background on your Bangle (GPS?) that's using a bunch of power, which might even be stopping the Bangle from fully charging... Posted at 2024-04-09 by Peter_Bernscheider Update: Later today I repeated the charging process, ignored both the „fully charged“ message and the beeps every few seconds, left the room. After an hour or two I came back and the battery was at 100% 😀 Posted at 2024-04-10 by @gfwilliams That's interesting - maybe someone else will correct me but I'm pretty sure the buzz should only happen when the charge cable is first connected - I've got Bangles I leave on charge all the time here and I don't hear them buzzing. So maybe the issue could be the USB charger that the charge cable is plugged into? The Bangle doesn't charge with a lot of power so maybe the charger gets confused and turns itself off/on thinking nothing is connected?
There's no option but the buzz is built into the battery widget: https://github.com/espruino/BangleApps/blob/master/apps/widbat/widget.js#L3 So you can either uninstall the widget completely, or install one that has an option like Posted at 2024-04-10 by Peter_Bernscheider I switched off the beep - thank you! |
Beta Was this translation helpful? Give feedback.
-
Posted at 2024-04-09 by Peter_Bernscheider
I´m using the Kickstarter version of the Bangle 2. Since a few months I have problems to fully charge the Bangle 2 battery: The charging process stoped after an hour or so with the "fully charged" message and initially showed 80%. Over time the final charging percentage was decreasing and today it already stoped at 60% or so. Last time I had calibrated the percentage measurement, but without effect.
What can I do else?
Thanks, Peter
Beta Was this translation helpful? Give feedback.
All reactions