routing.xml

<?xml version="1.0" encoding="utf-8" ?>
<osmand_routing_config defaultProfile="car" name="default">
	<!-- 1. parameters of routing and different tweaks Influence on A* : -->
	<!-- f(x) + heuristicCoefficient*g(X) -->
	<!-- TEMPORARY needs to be reverted to 1 -->
	<attribute name="heuristicCoefficient" value="" />

	<!-- 1.1 tile load parameters (should not affect routing) -->
	<!-- by default 16 -->
	<attribute name="zoomToLoadTiles" value="16" />
	<!--  by default it is 30. Value specified here overwrites all others
			 (don't specify here ! it is device dependent)  -->
	<attribute name="memoryLimitInMB" value="" />
	<attribute name="nativeMemoryLimitInMB" value="" />

	<!-- 1.2 Build A* graph in backward/forward direction (can affect results) -->
	<!-- 0 - 2 ways, 1 - direct way, -1 - reverse way -->
	<attribute name="planRoadDirection" value="0" />

	<!-- 1.3 When there is a query to recalculate route, -->
	<!-- recalculate smart using old route within N-meters (0 recalculate fresh, default 10km)  -->
	<attribute name="recalculateDistanceHelp" value="10000" />


	<!-- HELP INFORMATION ABOUT FILE -->
	<!--
	
		If you want to tweak the routing engine, read this carefully.
		
		Deploying your own routing.xml
		==============================
		
		When you finish editing this document (or want to test on your Android device), copy this file over to your device.

		Depending on your device and configuration, this could be one of the following paths:

		sdcard/Android/data/net.osmand.plus/files/routing/		(external memory setting, access via computer)
		/storage/emulated/0/Android/data/net.osmand.plus/files/routing/	(external memory setting, access via device itself)
		/data/net.osmand/files/routing/
		/data/user/0/net.osmand.plus/no_backup				(internal memory)
		...
		
		For iOS users, there is no known straightforward way. Please update this documentation if you find one.
		
		Restart OsmAnd (e.g. by swiping it away in the recent app view) to activate the new routing.xml;
		
		Overview of the document
		++++++++++++++++++++++++
	
		The document contains many big blocks, each describing a single profile.
		OsmAnd has three default profiles: car, bicycle and foot.
		
		Some others are described here as well but are hidden by default.
		These profiles can be enabled using the 'OsmAnd development plugin'
		
		## Routing profile 
		
		For starters, a profile can have a few parameter declarations, to finetune the profile:
		
		<parameter name="some_toggle" ... />
		<parameter name="some_other_preference" ... />
		
		(Details on parameters are given later on)
		
		A profile block contains at least the following segments:
		1) access				 (which determines if a road can be taken)
   		2) speed				  (which determines what max speed a road allows)

		A profile block might also contain following segments:
		3) oneway				 (which determines in which direction a road can be taken)
		4) priority			   (which determines how nice the road is to drive on)
		5) obstacle			   (which determines the delay of an obstacle, in seconds for the routing engine)	
		6) obstacle_time		  (which determines the delay of an obstacle, in seconds for the human)
		7) penalty_transition	 (which determines the penalty of transitioning from one highway to another, often a high-level road to a lower level road)


		The routing time of a segment is the sum of values calculated by these blocks, as the following formula indicates:
	
		distance/minimum(maxDefaultSpeed, speed*priority) + height penalty + obstacle penalties + turn penalties + ....
		
		Where `maxDefaultSpeed` is defined by the XML (in the header of the profile), whereas max_speed can be given explicitly by the road or implicitly by law 


		## Block overviews
		
		### 1) Access (specified on ways, obligated, -1 or 1)
		
		Access states whether or not a road _can_ be taken by your mode of transport.
		E.g. a pedestrian is not allowed on a motorway; neither can a car follow a small path.
		
		These values are specified included in a `way`-tag with the attribute `access`:
		
		<way attribute="access">
		
			... statements ...
			
		</way>
		
		Depending on the key-value pairs of a way, a value of either `-1` or `1` is selected.
		`-1` indicates that a road is _not_ accessible
		`1` indicates that the road can be taken
		   
		E.g., for a pedestrian are motorways not allowed:	
		<select value="-1" t="highway" v="motorway"/>
		
		There is no obligation to check against a value. The presence of a key can be enough to check against
		<select value="-1" t="bollard"/>
		
		At last, a default might be given, by not specifying a key:
		<select value="1"/>
		
		The first matching clause is used.
		
			   
		## 2) Speed (specified on ways, obligated, in km/h)
	
		The speed block gives, for each type of road, the maxspeed in km/h.
		If an explicit `maxspeed` tag is given on the way, the default speeds in the `speed` block are ignored.
	   
		
		## 3) Oneway (specified on ways)
	
		The oneway block specifies if the routing should respect the drawing order (direction) or a way.
		In the most simple case, going in both directions is allowed. For these ways, the value "0" is given:
	   
		<select value="0" t="oneway" v="no" />
		
		If the navigation should follow the line in the drawing direction, "1" is the value of choice:
		
		<select value="1" t="oneway" v="1"/>
		
		And if, for some reason, you want to go against the drawing diretion, the value of "-1" should be specified:
		
		<select value="-1" t="oneway" v="-1"/>
			
		
		## 4) Priority (specified on ways, between 0 and 1)
	
		 Priority is a preference multiplicator (between 0 and 1), which can only be used to _de_prioritize routes.
		The default value is 1 (= no effect).
		 The formula used is 
		 `speed_routing = minimum(speed * priority multiplier, maxDefaultSpeed)`;

		The main usage of priority is to discourage certain roads (e.g. based on bad smoothness of the road).
		If a given priority equals `0.5`, the speed will be halved and the road will be discouraged.
		

		On the other hand, a value >1 can be used to promote a route. However, there is an upperbound for this value. The 'speed*priority' can never grow above the maxDefaultSpeed.

	 	For example:
		 The bicycle profile has a maxDefaultSpeed of `33`.
		 The speed on a residential road is `23`.

		Consider that we want to promote this road, because it is marked as a `cycle_street`; and we give it a priority of 2.
		Is this priority of 2 more effective than say 1.5?

		The maximum effective factor is given by `maxDefaultSpeed/speed`, which equals `33/23 = 1.43`.
		In other words, every priority factor bigger than 1.43 has no extra benefit for this case.

		Thus, a factor between 0 and 1 is always effective; but a factor above 1 is not guaranteed to have an effect.



		## 5) Obstacle (specified on points, penalty time in seconds or -1 if blocked)
	
		This block evaluates points encountered on the road.
		The block specifies if this obstacle can be passed and eventually a penalty for passing it.
		
		A value of "-1" is given if the obstacle can not be passed.
		A value of "0" is given if the obstacle can be passed without problem and delay.
		A penalty in seconds is given if the obstacle slows you down (e.g. a kerb might slow down a car and bicycle).
		
		This value is only used by the routing engine.
		
		E.g. a kerb is a showstopper for a wheelchair
		<routingProfile name="wheelchair">
			<point attribute="obstacle>
				<select value="-1" t="barrier" v="kerb" />
			</point>
		</routingProfile>	
		
		
		E.g. a kerb causes a slight delay for cyclists
		<routingProfile name="bicycle">
			<point attribute="obstacle>
				<select value="5" t="barrier" v="kerb" />
			</point>
		</routingProfile>  
		

		## 6) Obstacle_time (specified on points, penalty time in seconds)

		Gives a slowdown time for an obstacle in seconds.
		In contract to `obstacle`, this value is only used to calculate an ETA and show it on the UI once the route is calculated.
		In other words, the values here do not influence routing.
		
		

		## 7) Penalty_transition (specified on ways, penalty time in seconds)

		When driving a car, changing from a motorway to a trunk slows you down:
		you should already slow down 500 meters before the trunk.
		This has a penalty which is taken into account by (only) the navigation algorithm.
		This is done by taking the difference between two penalties.
		The formula used is `maximum(0, penalty_new_way - penalty_current_way)`.
		
		E.g. 
		<way attribute="penalty_transition">
			<select value="0" t="highway" v="motorway"/>
			<select value="5" t="highway" v="motorway_link"/>
			<select value="20" t="highway" v="tertiary"/>
		</way>
				
		This means that, going from a `motorway_link` to a `tertiary`, the penalty given will be
		`maximum(0, 20 - 5)` or `15 seconds`.
		
		On the other hand, going from motorway to motorway incurs no penalty,
		neither does going from a motorway_link to a motorway.


		## 8) obstacle_srtm_alt_speed (specified on ways, in seconds of penalty for each height meter)
	
		Specifies a penalty for steep ways. Optional. Note that the value of a key can be used as value.
		 For more info about this, see the section about parameters.

		E.g.:
  		<gt value1="-60" value2=":incline">
  			<select value="35"/>
  		</gt>
  		<gt value1="-17" value2=":incline">
  			<select value="10"/>
  		</gt>
  		<gt value1="-3" value2=":incline">
  			<select value="1"/>
  		</gt>
  		<gt value1="3" value2=":incline">
  			<select value="0"/>
  		</gt>

  		<gt value1="13" value2=":incline">
  			<select value="8"/>
  		</gt>
  		<gt value1="17" value2=":incline">
  			<select value="1"/>
  		</gt>
  		<gt value1="25" value2=":incline">
  			<select value="10"/>
  		</gt>
  		<select value="15"/>

		has the following meaning:

		-60% and less => 35 seconds per height metre
		[-17% till -60%) => 17 seconds per height metre
		[-3% till -17%) => 1 seconds per height metre
		[3% till -3%) => 0 seconds per height metre
		[3% till 13%) => 8 seconds per height metre
		[13% till 17) => 1 seconds per height metre
		... etc

		A negative select value (seconds per height metre) means "impassable".

		If the incline of a way is 20%, then the penalty per height metre is 10 seconds.
		If the part of the way has for example 9 height meters, then the penalty for this part will be 10*9 = 90 seconds.

				
		## Working with parameters and conditionals
		
		A profile can be tuned further with parameters, to suit the need of each user.
		These toggles could be a preference for a fast route over a comfortable one, the desire to avoid borders, ...
		
		### Declaring parameters
		
		Parameters are declared on top of the routing profile, each in their own tag.
		
		Such a tag could be:		
			<parameter id="some_parameter"	 (The name of the variable. You'll use this a lot.)
				 group="some_group_name"	   (The name the group, used for grouping similar settings in a nice radiobox-UI)
				 name="Some routing option"	(How this is presented to the user)
				 description="This routing options uses this or that feature"
											   (A description that is shown to the user)
				 type="boolean"/>			  (The type of the toggle. Supported values are `boolean` and `numeric`.)
				 
		#### Numeric parameters

		Numeric parameters are declared just as a boolean parameter; but require some additional tags.

		<parameter id="height" name="Height" description="height" 	(Same as boolean tags)
		type="numeric" 						(This is a different type. Who would have guessed it?)
		values="0,1.5,2,2.5,3,3.5,4" 				(The actual values, comma seperated. Floats and ints are allowed)
		valueDescriptions="-,1.5m,2m,2.5m,3m,3.5m,4m		(How each option is shown within the GUI)
		/>

   
		### Setting parameters via OsmAnd UI
		
		The UI of OsmAnd automatically picks up those settings, if this document is deployed.
		Just declaring a boolean option is enough to show a checkbox in the navigation settings.
		
		Toggle the checkbox to see your custom profile in action!
		The appearing extra toggle is also useful to see the activation of your custom routing.xml.
		
		### Using boolean parameters in the routing engine
		
		The boolean options can be tested with an if-tag:
		
		<if param="some_parameter">
			... some select statements ...
		</if>
		
		Analogously, ifnot can be used as well
		
		<ifnot param="some_parameter">
			... selections ...
		</ifnot>
		
		E.g. if you cycle often with a cart, and that cart doesn't like `sett`-pavements, a toggle for this could be added:
		
		<routingProfile name="bicycle" ... >
		
		<parameter id="avoid_sett"
			name="Avoid streets with sett"
			description="Prefers asphalt, paving stones and concrete surfaces. Ideal if driving with a cycling cart"
			type="boolean"/> 
		
		</routingProfile>
		
		### Using numeric parameters in the routing engine   

		Numeric values can be used to compare to other values. For this, a `gt` (greater-then) tag is used.
		The `gt`-tag acts just like an if-test. 
		It will also include the specified number: `<gt value1=":a" value2="3">` means `if parameter a is 3 or higher`

		For example, if the height of your car is set, you'll want to compare it with the `maxheight`-tag given to some ways. This is done with a `gt` tag:

	
		<gt value1=":height" value2="$maxweight" type="height">
			<select value="-1" t="maxweight" />
		</gt>

		To call a value, use either ':' or '$' as prefix. Use ':' for the parameters that you defined
		 and '$' for tags loaded from the obf-file (the file containing the data from OSM).

		The `type` gives a hint on how to parse the values. If the type is `height`, '1' will be interpreted as '1 meter'.
		For a type `weight`, '1' will be interpreted as one ton (1000 kg).
	
		Miscellaneous
		+++++++++++++

		osmand_highway_integrity_brouting represents how good a way is for a bicycle.
		Mostly it merges smoothness, surface and tracktype into one value. It is calculated internally?

		### Alternative notation for <if><select /></if> and <gt><select /></gt>

		A different but equivalent format for if- and gt-tags exists: the <if> can be placed inside a <select>
		However, it is considered bad style (so don't use it).

		In other words:

		<if param="x">
			<select value="..."/>
		</if>

		is totally equivalent to:

		<select value="...">
			<if param="x"/> (Deprecated notation)
		</select>.

		However, we recommend *not to use this format*. The if as outer tags are clearer, and support multiple selects:

		<if param="$x">
			<select value="1" t="y" v="z"/>
			<select value="0" t="w" v="a"/>
			...
	 	</if>
	-->

	<routingProfile name="car" baseProfile="car" restrictionsAware="true" minSpeed="20.0" defaultSpeed="45.0" maxSpeed="130.0" sharpTurn="30" slightTurn="15" roundaboutTurn="15" onewayAware="true">
		<!-- Special penalty for reversed direction at route's startup (in seconds, default is 60) -->
		<attribute name="penaltyForReverseDirection" value="300" /> <!-- car: ~ 5 minutes to find U-turn -->
	 	<!--<attribute name="heuristicCoefficient" value="1.5" />
		-->
		<attribute name="derivedProfiles" value="default,truck,motorcycle"/>
		<!-- MAIN parameter to approximate (35m good for custom recorded tracks)-->
		<attribute name="minPointApproximation" value = "50"/>
		<!-- don't search subsegments shorter than specified distance (also used to step back for car turns) -->
		<attribute name="minStepApproximation" value = "100"/>
		<!-- This parameter could speed up or slow down evaluation (better to make bigger for long routes and smaller for short)-->
		<attribute name="maxStepApproximation" value= "3000"/>
		<!-- Parameter to smoother the track itself (could be 0 if it's not recorded track) -->
		<attribute name="smoothenPointsNoRoute" value = "5"/>

		<!-- Turn penalties for short_way=yes -->
		<attribute name="shortWaySharpTurn" value = "10"/>
		<attribute name="shortWaySlightTurn" value = "5"/>
		<attribute name="shortWayRoundAboutTurn" value = "5"/>

		<!-- NEW ROUTING API -->
		<!-- <parameter id="prefer_motorway" name="Prefer motorways" description="Prefer motorways" type="boolean"/> -->
		<!-- <parameter id="no_new_routing" name="Do not use v1.9 routing" description="Do not use v1.9 routing" type="boolean"/> -->
		
		<parameter id="short_way" name="Short way" description="Short way" type="boolean"/>
		<parameter id="avoid_toll" name="Avoid toll roads" description="Avoid toll roads" type="boolean"/>
		<parameter id="avoid_unpaved" name="Avoid unpaved roads" description="Avoid unpaved roads" type="boolean"/>
		<parameter id="avoid_low_emission_zone" name="Avoid low emission zones" description="Avoid low emission zones" type="boolean"/>
		<parameter id="prefer_unpaved" name="Prefer unpaved roads" description="Prefer unpaved roads" type="boolean"/>
		<parameter id="avoid_ferries" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		<parameter id="avoid_shuttle_train" name="Avoid Shuttle Trains" description="Avoid Shuttle Trains" type="boolean"/>
		<parameter id="avoid_motorway" name="Avoid motorways" description="Avoid motorways" type="boolean"/>
		<parameter id="avoid_tunnels" name="Avoid tunnels" description="Avoid tunnels" type="boolean"/>
		<parameter id="avoid_borders" name="Avoid border crossing" description="Avoid crossing a border into another country" type="boolean"/>
		<parameter id="avoid_ice_roads_fords" name="Avoid ice roads, fords" description="Avoid ice roads and fords" type="boolean"/>
		<parameter id="avoid_4wd_only" name="Avoid 4WD roads" description="Avoid roads only suitable for 4WD only vehicles" type="boolean"/>
		<parameter id="allow_private" name="Allow private access" description="Allow access to private areas for cars" type="boolean" profiles="default,motorcycle"/>
		<parameter id="allow_private_for_truck" name="Allow private access (truck)" description="Allow access to private areas for trucks" type="boolean" profiles="truck"/>
		<parameter id="goods_restrictions" name="Goods vehicles restrictions" description="Consider access permissions for light goods vehicles (goods)" type="boolean" profiles="default"/>
		<parameter id="hazmat_category" name="Hazmat category" description="Hazardous materials category / Consider hazmat access permissions" type="numeric" values="0,1,2,3,4" valueDescriptions="No restrictions,B,C,D,E" default="0" profiles="truck"/>
		<!--<parameter id="hazmat_category_usa" name="Hazmat category (USA)" description="Hazardous materials category (USA) / Consider hazmat access permissions" type="numeric" values="0,1,1.1,1.2,1.3,1.4,1.5,1.6,2,2.1,2.2,2.3,3,4,4.1,4.2,4.3,5,5.1,5.2,6,6.1,6.2,7,8,9" valueDescriptions="No restrictions,1,1.1,1.2,1.3,1.4,1.5,1.6,2,2.1,2.2,2.3,3,4,4.1,4.2,4.3,5,5.1,5.2,6,6.1,6.2,7,8,9" default="0" profiles="truck"/>-->
		<parameter id="hazmat_category_usa_1" name="HazMat 1. Explosives" description="HazMat 1. Explosives" type="boolean" profiles="truck"/>
		<parameter id="hazmat_category_usa_2" name="HazMat 2. Gases" description="HazMat 2. Gases" type="boolean" profiles="truck"/>
		<parameter id="hazmat_category_usa_3" name="HazMat 3. Flammable liquids" description="HazMat 3. Flammable liquids" type="boolean" profiles="truck"/>
		<parameter id="hazmat_category_usa_4" name="HazMat 4. Flammable solids" description="HazMat 4. Flammable solids" type="boolean" profiles="truck"/>
		<parameter id="hazmat_category_usa_5" name="HazMat 5. Oxidizing agents and organic peroxides" description="HazMat 5. Oxidizing agents and organic peroxides" type="boolean" profiles="truck"/>
		<parameter id="hazmat_category_usa_6" name="HazMat 6. Toxic and infectious substances" description="HazMat 6. Toxic and infectious substances" type="boolean" profiles="truck"/>
		<parameter id="hazmat_category_usa_7" name="HazMat 7. Radioactive substances" description="HazMat 7. Radioactive substances" type="boolean" profiles="truck"/>
		<parameter id="hazmat_category_usa_8" name="HazMat 8. Corrosive substances" description="HazMat 8. Corrosive substances" type="boolean" profiles="truck"/>
		<parameter id="hazmat_category_usa_9" name="HazMat 9. Miscellaneous" description="HazMat 9. Miscellaneous" type="boolean" profiles="truck"/>
		<parameter id="weight" name="Weight" description="Maximum vehicle weight to be permitted on the route" type="numeric" values="0,1.49,2.99,3.49,4.99,7.49,9.99,11.99,14.99,19.99,29.99,39.99" valueDescriptions="-,1.5t,3t,3.5t,5t,7.5t,10t,12t,15t,20t,30t,40t"/>
		<parameter id="height" name="Height" description="Maximum vehicle height to be permitted on the route" type="numeric" values="0,1.49,1.99,2.49,2.99,3.49,3.99,4.49,4.99,5.49,5.99,6.49,6.99,7.49" valueDescriptions="-,1.5m,2m,2.5m,3m,3.5m,4m,4.5m,5m,5.5m,6m,6.5m,7m,7.5m"/>
		<parameter id="length" name="Length" description="Maximum vehicle length to be permitted on the route" type="numeric" values="0,4.99,5.99,6.49,6.99,7.99,8.99,9.49,9.99,10.99,11.99" valueDescriptions="-,5m,6m,6.5m,7m,8m,9m,9.5m,10m,11m,12m"/>
		<parameter id="width" name="Width" description="Maximum vehicle width to be permitted on the route" type="numeric" values="0,1.49,1.99,2.29,2.49,2.99" valueDescriptions="-,1.5m,2m,2.3m,2.5m,3m"/>
		<parameter id="maxaxleload" name="Max axle load" description="Maximum legal load weight limit per axle" type="numeric" values="0,1.49,2.99,3.49,4.99,7.49,9.99,11.99,14.99,19.99,29.99,39.99" valueDescriptions="-,1.5t,3t,3.5t,5t,7.5t,10t,12t,15t,20t,30t,40t" profiles="truck"/>
		<parameter id="weightrating" name="Max weight at full load" description="Maximum permitted weight of the vehicle at full load" type="numeric" values="0,1.49,2.99,3.49,4.99,7.49,9.99,11.99,14.99,19.99,29.99,39.99" valueDescriptions="-,1.5t,3t,3.5t,5t,7.5t,10t,12t,15t,20t,30t,40t" profiles="truck"/>
		<parameter id="motor_type" name="Motor type" description="For CO2 computation" type="numeric" values="0,1,2,3,4,5,6" valueDescriptions="-,Petrol,Diesel,Lpg,Gas,Electric,Hybrid"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="highway" v="proposed"/>
			<select value="-1" t="highway" v="construction"/>
			<select value="-1" t="construction" v="yes"/>
			<select value="-1" t="oneway" v="reversible"/>
			<if param="avoid_low_emission_zone">
				<select value="-1" t="low_emission_zone" v="yes"/>
			</if>
			<if param="avoid_ice_roads_fords">
				<select value="-1" t="ice_road" v="yes"/>
				<select value="-1" t="winter_road" v="yes"/>
				<select value="-1" t="ford" v="yes"/>
			</if>
			<if param="avoid_ferries">
			    <select value="-1" t="route" v="ferry"/>
			</if>
			<if param="avoid_shuttle_train">
			    <select value="-1" t="route" v="shuttle_train"/>
			</if>
			<if param="goods_restrictions">
				<select value="-1" t="goods" v="no"/>
			</if>
			<if param="avoid_4wd_only">
				<select value="-1" t="4wd_only" v="yes"/>
				<select value="-1" t="4wd_only" v="recommended"/>
			</if>
			<if param="avoid_unpaved">
				<select value="-1" t="highway" v="track"/>
				<select value="-1" t="surface" v="unpaved"/>
				<select value="-1" t="surface" v="compacted"/>
				<select value="-1" t="surface" v="dirt"/>
				<select value="-1" t="surface" v="gravel"/>
				<select value="-1" t="surface" v="fine_gravel"/>
				<select value="-1" t="surface" v="grass"/>
				<select value="-1" t="surface" v="ground"/>
				<select value="-1" t="surface" v="mud"/>
				<select value="-1" t="surface" v="pebblestone"/>
				<select value="-1" t="surface" v="sand"/>
				<!--<select value="-1" t="surface" v="wood"/>-->
				<select value="-1" t="smoothness" v="very_bad"/>
				<select value="-1" t="smoothness" v="horrible"/>
				<select value="-1" t="smoothness" v="very_horrible"/>
				<select value="-1" t="smoothness" v="impassable"/>
			</if>

			<select value="-1" t="highway" v="steps"/>

			<if param="profile_truck">
				<select value="-1" t="hgv" v="no"/>
				<select value="-1" t="hgv_articulated" v="no"/>
				<if param="allow_private_for_truck">
					<select value="1" t="hgv" v="private"/>
					<select value="1" t="hgv_articulated" v="private"/>
				</if>
				<select value="-1"  t="hgv" v="private"/>
				<select value="-1"  t="hgv_articulated" v="private"/>
			</if>

			<if param="profile_motorcycle">
				<select value="-1" t="motorcycle" v="no"/>
				<select value="-1" t="motorcycle" v="private"/>
				<select value="-1" t="motorcycle" v="agricultural"/>
				<select value="-1" t="motorcycle" v="forestry"/>
				<select value="1" t="motorcycle" v="yes"/>
				<select value="1" t="motorcycle" v="permissive"/>
				<select value="1" t="motorcycle" v="designated"/>
				<select value="1" t="motorcycle" v="destination"/>
				<select value="1" t="motorcycle" v="customers"/>
				<select value="1" t="motorcycle" v="official"/>
			</if>

			<select value="-1" t="motorcar" v="no"/>
			<select value="-1" t="motorcar" v="agricultural"/>
			<select value="-1" t="motorcar" v="forestry"/>
			<select value="1"  t="motorcar" v="yes"/>
			<if param="allow_private">
				<select value="1"  t="motorcar" v="private"/>
			</if>
			<select value="-1"  t="motorcar" v="private"/>
			<select value="1"  t="motorcar" v="permissive"/>
			<select value="1"  t="motorcar" v="designated"/>
			<select value="1"  t="motorcar" v="destination"/>
			<select value="1"  t="motorcar" v="customers"/>
			<select value="1"  t="motorcar" v="official"/>

			<select value="-1" t="motor_vehicle" v="no"/>
			<select value="-1" t="motor_vehicle" v="agricultural"/>
			<select value="-1" t="motor_vehicle" v="forestry"/>
			<select value="1"  t="motor_vehicle" v="yes"/>
			<if param="allow_private">
				<select value="1"  t="motor_vehicle" v="private"/>
			</if>
			<select value="-1"  t="motor_vehicle" v="private"/>
			<select value="1"  t="motor_vehicle" v="permissive"/>
			<select value="1"  t="motor_vehicle" v="designated"/>
			<select value="1"  t="motor_vehicle" v="destination"/>
			<select value="1"  t="motor_vehicle" v="customers"/>
			<select value="1"  t="motor_vehicle" v="official"/>

			<select value="-1" t="vehicle" v="no"/>
			<select value="-1" t="vehicle" v="agricultural"/>
			<select value="-1" t="vehicle" v="forestry"/>
			<select value="1"  t="vehicle" v="yes"/>
			<if param="allow_private">
				<select value="1"  t="vehicle" v="private"/>
			</if>
			<select value="-1"  t="vehicle" v="private"/>
			<select value="1"  t="vehicle" v="permissive"/>
			<select value="1"  t="vehicle" v="designated"/>
			<select value="1"  t="vehicle" v="destination"/>
			<select value="1"  t="vehicle" v="customers"/>

			<select value="-1" t="highway" v="cycleway"/>
			<select value="-1" t="highway" v="footway"/>
			<select value="-1" t="highway" v="path"/>

			<select value="-1" t="access" v="no"/>
			<select value="-1" t="access" v="agricultural"/>
			<select value="-1" t="access" v="forestry"/>
			<select value="-1" t="access" v="emergency"/>
			<select value="1"  t="access" v="yes"/>
			<if param="allow_private">
				<select value="1"  t="access" v="private"/>
			</if>
			<select value="-1"  t="access" v="private"/>
			<select value="1"  t="access" v="permissive"/>
			<select value="1"  t="access" v="destination"/>
			<select value="1"  t="access" v="customers"/>

			<if param="profile_truck">
				<select value="-1" t="maxweight:hgv">
					<gt value1=":weight" value2="$maxweight" type="weight"/>
				</select>
				<select value="-1" t="maxweightrating:hgv">
					<gt value1=":weightrating" value2="$maxweightrating:hgv" type="weight"/>
				</select>
			</if>
			<select value="-1" t="maxweight">
				<gt value1=":weight" value2="$maxweight" type="weight"/>
			</select>
			<select value="-1" t="maxweightrating">
				<gt value1=":weightrating" value2="$maxweightrating" type="weight"/>
			</select>
			<select value="-1" t="maxaxleload">
				<gt value1=":maxaxleload" value2="$maxaxleload" type="weight"/>
			</select>
			<select value="-1" t="maxheight">
				<gt value1=":height" value2="$maxheight" type="length"/>
			</select>
			<select value="-1" t="maxlength">
				<gt value1=":length" value2="$maxlength" type="length"/>
			</select>
			<select value="-1" t="maxwidth">
				<gt value1=":width" value2="$maxwidth" type="length"/>
			</select>
			<select value="-1" t="maxwidth:physical">
				<gt value1=":width" value2="$maxwidth:physical" type="length"/>
			</select>
			<select value="-1" t="width">
				<gt value1=":width" value2="$width" type="length"/>
			</select>
			<select value="-1" t="maxheight:forward">
				<gt value1=":height" value2="$maxheight:forward" type="length"/>
			</select>
			<select value="-1" t="maxheight:backward">
				<gt value1=":height" value2="$maxheight:backward" type="length"/>
			</select>

			<gt value1=":hazmat_category" value2="4"> <!-- E -->
				<select value="-1" t="hazmat" v="no"/>
				<select value="1" t="hazmat:a" v="yes"/>
				<select value="-1" t="hazmat:a" v="no"/>
				<select value="1" t="hazmat:b" v="yes"/>
				<select value="-1" t="hazmat:b" v="no"/>
				<select value="1" t="hazmat:c" v="yes"/>
				<select value="-1" t="hazmat:c" v="no"/>
				<select value="1" t="hazmat:d" v="yes"/>
				<select value="-1" t="hazmat:d" v="no"/>
				<select value="1" t="hazmat:e" v="yes"/>
				<select value="-1" t="hazmat:e" v="no"/>
			</gt>
			<gt value1=":hazmat_category" value2="3"> <!-- D -->
				<select value="-1" t="hazmat" v="no"/>
				<select value="1" t="hazmat:a" v="yes"/>
				<select value="-1" t="hazmat:a" v="no"/>
				<select value="1" t="hazmat:b" v="yes"/>
				<select value="-1" t="hazmat:b" v="no"/>
				<select value="1" t="hazmat:c" v="yes"/>
				<select value="-1" t="hazmat:c" v="no"/>
				<select value="1" t="hazmat:d" v="yes"/>
				<select value="-1" t="hazmat:d" v="no"/>
			</gt>
			<gt value1=":hazmat_category" value2="2"> <!-- C -->
				<select value="-1" t="hazmat" v="no"/>
				<select value="1" t="hazmat:a" v="yes"/>
				<select value="-1" t="hazmat:a" v="no"/>
				<select value="1" t="hazmat:b" v="yes"/>
				<select value="-1" t="hazmat:b" v="no"/>
				<select value="1" t="hazmat:c" v="yes"/>
				<select value="-1" t="hazmat:c" v="no"/>
			</gt>
			<gt value1=":hazmat_category" value2="1"> <!-- B -->
				<select value="-1" t="hazmat" v="no"/>
				<select value="1" t="hazmat:a" v="yes"/>
				<select value="-1" t="hazmat:a" v="no"/>
				<select value="1" t="hazmat:b" v="yes"/>
				<select value="-1" t="hazmat:b" v="no"/>
			</gt>
			<gt value1=":hazmat_category" value2="0"> <!-- A -->
				<select value="1" t="hazmat:a" v="yes"/>
				<select value="-1" t="hazmat:a" v="no"/>
			</gt>

			<!--hazmat category usa-->
			<if param="hazmat_category_usa_1">
				<select value="-1" t="hazmat:1" v="no"/>
				<select value="-1" t="hazmat:1.1" v="no"/>
				<select value="-1" t="hazmat:1.2" v="no"/>
				<select value="-1" t="hazmat:1.3" v="no"/>
				<select value="-1" t="hazmat:1.4" v="no"/>
				<select value="-1" t="hazmat:1.5" v="no"/>
				<select value="-1" t="hazmat:1.6" v="no"/>
			</if>

			<if param="hazmat_category_usa_2">
				<select value="-1" t="hazmat:2" v="no"/>
				<select value="-1" t="hazmat:2.1" v="no"/>
				<select value="-1" t="hazmat:2.2" v="no"/>
				<select value="-1" t="hazmat:2.3" v="no"/>
			</if>

			<if param="hazmat_category_usa_3">
				<select value="-1" t="hazmat:3" v="no"/>
			</if>

			<if param="hazmat_category_usa_4">
				<select value="-1" t="hazmat:4" v="no"/>
				<select value="-1" t="hazmat:4.1" v="no"/>
				<select value="-1" t="hazmat:4.2" v="no"/>
				<select value="-1" t="hazmat:4.3" v="no"/>
			</if>

			<if param="hazmat_category_usa_5">
				<select value="-1" t="hazmat:5" v="no"/>
				<select value="-1" t="hazmat:5.1" v="no"/>
				<select value="-1" t="hazmat:5.2" v="no"/>
			</if>

			<if param="hazmat_category_usa_6">
				<select value="-1" t="hazmat:6" v="no"/>
				<select value="-1" t="hazmat:6.1" v="no"/>
				<select value="-1" t="hazmat:6.2" v="no"/>
			</if>

			<if param="hazmat_category_usa_7">
				<select value="-1" t="hazmat:7" v="no"/>
			</if>

			<if param="hazmat_category_usa_8">
				<select value="-1" t="hazmat:8" v="no"/>
			</if>

			<if param="hazmat_category_usa_9">
				<select value="-1" t="hazmat:9" v="no"/>
			</if>

			<select value="1" t="highway" v="motorway"/>
			<select value="1" t="highway" v="motorway_link"/>
			<select value="1" t="highway" v="trunk"/>
			<select value="1" t="highway" v="trunk_link"/>
			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="1" t="route" v="ferry"/>
			<select value="1" t="route" v="shuttle_train"/>
			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="1" t="oneway:motorcar" v="yes"/>
			<select value="0" t="oneway:motorcar" v="no"/>
			<select value="-1" t="oneway:motorcar" v="-1"/>
			
			<select value="1" t="oneway:motor_vehicle" v="yes"/>
			<select value="0" t="oneway:motor_vehicle" v="no"/>
			<select value="-1" t="oneway:motor_vehicle" v="-1"/>

			<select value="1" t="oneway:vehicle" v="yes"/>
			<select value="0" t="oneway:vehicle" v="no"/>
			<select value="-1" t="oneway:vehicle" v="-1"/>

			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
			<select value="1" t="roundabout"/>
			<select value="1" t="junction" v="roundabout"/>
			<select value="1" t="motor_vehicle:backward" v="no"/>
			<select value="-1" t="motor_vehicle:forward" v="no"/>
			<select value="1" t="vehicle:backward" v="no"/>
			<select value="-1" t="vehicle:forward" v="no"/>
		</way>

		<way attribute="penalty_transition">
			<!-- cost in time when you change the route from motorway to primary or from primary
				 to living_street, but not other way around. Calculated as difference between values -->
			<!-- 
			<if param="no_new_routing">
				<select value="0"/>
			</if>
			-->
			<if param="short_way">
				<select value="0" t="highway" v="motorway"/>
				<select value="1" t="highway" v="motorway_link"/>
				<select value="5" t="highway" v="trunk"/>
				<select value="5" t="highway" v="trunk_link"/>
				<select value="10" t="highway" v="primary"/>
				<select value="10" t="highway" v="primary_link"/>
				<select value="15" t="highway" v="secondary"/>
				<select value="15" t="highway" v="secondary_link"/>
				<select value="20" t="highway" v="tertiary"/>
				<select value="20" t="highway" v="tertiary_link"/>
				<select value="40" t="highway" v="service"/>
				<select value="25"/>
			</if>
			
			<if param="avoid_motorway">
				<select value="100" t="highway" v="motorway"/>
				<select value="90" t="highway" v="motorway_link"/>
			</if>
			<if param="avoid_tunnels">
				<select value="200" t="tunnel" v="yes"/>
				<select value="150" t="tunnel" v="avalanche_protector"/>
			</if>
			<select value="100" t="surface" v="gravel"/>

			<select value="0" t="highway" v="motorway"/>
			<select value="0" t="highway" v="motorway_link"/>
			<select value="10" t="highway" v="trunk"/>
			<select value="10" t="highway" v="trunk_link"/>
			<select value="50" t="highway" v="primary"/>
			<select value="51" t="highway" v="primary_link"/>
			<select value="80" t="highway" v="secondary"/>
			<select value="80" t="highway" v="secondary_link"/>
			<select value="130" t="highway" v="tertiary"/>
			<select value="130" t="highway" v="tertiary_link"/>
			<select value="155" t="highway" v="unclassified"/>
			<select value="167" t="highway" v="residential"/>
			<select value="230" t="highway" v="service"/>
			<select value="200"/>
			
			<!--
			<select value="" t="highway" v="road"/>
			<select value="" t="highway" v="residential"/>
			<select value="" t="highway" v="track"/>
			<select value="" t="highway" v="unclassified"/>
			<select value="" t="highway" v="service"/>
			
			<select value="" t="highway" v="living_street"/>
			<select value="" t="route" v="ferry"/>-->
		</way>

		<way attribute="speed" type="speed">
			<!-- maxspeed doesn't affect on motorway_link and trunk_link -->
			<select value="100" t="highway" v="motorway_link"/>
			<select value="90" t="highway" v="trunk_link"/>

			<if param="profile_truck">
				<select value="$maxspeed:hgv" t="maxspeed:hgv"/>
				<select value="$maxspeed:goods" t="maxspeed:goods"/>
				<select value="$maxspeed:truck" t="maxspeed:truck"/>
			</if>

			<!-- shortway handled internally -->
			<select value="$maxspeed:motorcar" t="maxspeed:motorcar"/>
			<select value="$maxspeed:practical" t="maxspeed:practical"/>
			<select value="$maxspeed:advisory" t="maxspeed:advisory"/>
			<select value="$maxspeed" t="maxspeed"/>

			<!-- most important backbone roads -->
			<select value="110" t="highway" v="motorway"/>
			<select value="100" t="highway" v="trunk"/>

			<!-- generally linking larger towns -->
			<select value="65" t="highway" v="primary"/>
			<select value="65" t="highway" v="primary_link"/>
			<!-- generally linking smaller towns and villages -->
			<select value="60" t="highway" v="secondary"/>
			<select value="60" t="highway" v="secondary_link"/>
			
			<!-- important urban roads -->
			<select value="45" t="highway" v="tertiary"/>
			<select value="45" t="highway" v="tertiary_link"/>
			
			<!-- Some values of "abutters" mean the road is inside a place,
				 so cap the speed even if it is a high level road (below). -->
			<!--
			<select value="30" t="abutters" v="residential"/>
			<select value="30" t="abutters" v="commercial"/>
			<select value="30" t="abutters" v="retail"/>
			<select value="30" t="abutters" v="industrial"/>
			<select value="30" t="abutters" v="mixed"/>
			-->
			<!-- roads with speeds lower than 50 and those that we want to ignore abutters
				 must be placed before the "abutters" block below. -->
			
			<!-- lowest form of grid network, usually 90% of urban roads -->
			<select value="35" t="highway" v="unclassified"/>
			<!-- road = no type, no review and may be not accurate -->
			<select value="35" t="highway" v="road"/>
			<select value="35" t="highway" v="residential"/>
			<select value="15" t="highway" v="track"/>

			<select value="30" t="highway" v="service"/>
			<select value="25" t="highway" v="living_street"/>
			<select value="15" t="route" v="ferry"/>
			<select value="60" t="route" v="shuttle_train"/>

		</way>

		<way attribute="priority">
			<!-- not working fine -->
			<!--
			<if param="prefer_motorway">
				<select value="1.2" t="highway" v="motorway"/>
				<select value="1.1" t="highway" v="motorway_link"/>
				<select value="1.2" t="highway" v="trunk"/>
				<select value="1.1" t="highway" v="trunk_link"/>
			</if> -->
			<!-- access deprioritize -->
			<select t="motorcar" v="private" value="0.15"/>
			<select t="motorcar" v="destination" value="0.15"/>
			<select t="motorcar" v="delivery" value="0.15"/>
			<select t="motorcar" v="customers" value="0.15"/>
			<select t="motor_vehicle" v="private" value="0.15"/>
			<select t="motor_vehicle" v="destination" value="0.15"/>
			<select t="motor_vehicle" v="delivery" value="0.15"/>
			<select t="motor_vehicle" v="customers" value="0.15"/>
			<select t="vehicle" v="private" value="0.15"/>
			<select t="vehicle" v="destination" value="0.15"/>
			<select t="vehicle" v="delivery" value="0.15"/>
			<select t="vehicle" v="customers" value="0.15"/>
			<select t="access" v="private" value="0.15"/>
			<select t="access" v="destination" value="0.15"/>
			<select t="access" v="delivery" value="0.15"/>
			<select t="access" v="customers" value="0.15"/>
			<if param="profile_truck">
				<select t="hgv" v="delivery" value="0.15"/>
			</if>

			<select value="0.2" t="tracktype" v="grade5" />
			<select value="0.5" t="smoothness" v="bad"/>
			<select value="0.3" t="smoothness" v="very_bad"/>
			<select value="0.15" t="smoothness" v="horrible"/>
			<select value="0.1" t="smoothness" v="very_horrible"/>
			<select value="0.05" t="smoothness" v="impassable"/>

			<if param="prefer_unpaved">
				<if param="avoid_motorway">
					<select value="0.05" t="highway" v="motorway"/>
					<select value="0.05" t="highway" v="motorway_link"/>
				</if>
				<select value="1.5" t="tracktype" v="grade2"/>
				<select value="1.4" t="tracktype" v="grade3"/>
				<select value="1.3" t="tracktype" v="grade4"/>
				<select value="1.2" t="tracktype" v="grade5"/>
				<select value="1.3" t="surface" v="unpaved"/>
				<select value="0.6" t="surface" v="compacted"/>
				<select value="1.3" t="surface" v="dirt"/>
				<select value="1.5" t="surface" v="earth"/>
				<select value="0.7" t="surface" v="gravel"/>
				<select value="0.4" t="surface" v="fine_gravel"/>
				<select value="1.1" t="surface" v="grass"/>
				<select value="1.5" t="surface" v="ground"/>
				<select value="0.5" t="surface" v="mud"/>
				<select value="1.3" t="surface" v="pebblestone"/>
				<select value="1.0" t="surface" v="sand"/>


				<select value="0.1" t="surface" v="asphalt"/>
				<select value="0.2" t="surface" v="chipseal"/>
				<select value="0.1" t="surface" v="paved"/>
				<select value="0.1" t="surface" v="concrete"/>
				<select value="0.2" t="surface" v="paving_stones"/>

				<select value="0.2" t="highway" v="motorway"/>
				<select value="0.18" t="highway" v="motorway_link"/>
				<select value="0.4" t="highway" v="trunk"/>
				<select value="0.35" t="highway" v="trunk_link"/>
				<select value="0.45" t="highway" v="primary"/>
				<select value="0.4" t="highway" v="primary_link"/>
				<select value="0.45" t="highway" v="secondary"/>
				<select value="0.4" t="highway" v="secondary_link"/>
				<select value="0.7" t="highway" v="tertiary"/>
				<select value="0.65" t="highway" v="tertiary_link"/>
				<select value="1.4" t="highway" v="unclassified"/>
				<select value="1.3" t="highway" v="road"/>
				<select value="1.3" t="highway" v="residential"/>

				<select value="1.0" t="highway" v="track"/>

				<select value="0.8" t="highway" v="service"/>
				<select value="0.8" t="highway" v="living_street"/>
			</if>
			<if param="avoid_motorway">
				<select value="0.05" t="highway" v="motorway"/>
				<select value="0.05" t="highway" v="motorway_link"/>
			</if>

			<if param="avoid_tunnels">
				<select value="0.02" t="tunnel" v="yes"/>
			</if>
			<if param="avoid_toll">
				<select value="0.02" t="toll" v="yes"/>
			</if>

			<select value="0.5" t="surface" v="gravel"/>
			<select value="0.5" t="surface" v="unpaved"/>

			<select value="1.1" t="highway" v="motorway"/>
			<!-- make links slightly smaller, so in large parallel intersections, ways will be preferred over links -->
			<select value="0.65" t="highway" v="motorway_link"/>
			<select value="1" t="highway" v="trunk"/>
			<select value="0.7" t="highway" v="trunk_link"/>
			<!-- generally linking larger towns. -->
			<select value="1.0" t="highway" v="primary"/>
			<select value="0.95" t="highway" v="primary_link"/>
			<!-- generally linking smaller towns and villages -->
			<select value="0.95" t="highway" v="secondary"/>
			<select value="0.9" t="highway" v="secondary_link"/>
			<!-- important urban roads -->
			<select value="0.9" t="highway" v="tertiary"/>
			<select value="0.85" t="highway" v="tertiary_link"/>
			<!-- lowest form of grid network, usually 90% of urban roads -->
			<select value="0.7" t="highway" v="unclassified"/>
			<!-- road = no type, no review and may be not accurate -->
			<select value="0.7" t="highway" v="road"/>
			<select value="0.7" t="highway" v="residential"/>

			<select value="0.5" t="highway" v="track"/>

			<select value="0.5" t="highway" v="service"/>
			<select value="0.5" t="highway" v="living_street"/>
			<select value="1" t="route" v="ferry"/>
			<select value="1" t="route" v="shuttle_train"/>

			<select value="0.7"/>
		</way>

		<way attribute="destination_priority">
			<select value="0.5" t="tunnel" v="yes"/>
		</way>

		<point attribute="obstacle_time">
			<select value="5"  t="barrier" v="entrance"/>
			<select value="15" t="barrier" v="gate"/>
			<select value="15" t="barrier" v="lift_gate"/>
			<select value="30" t="barrier" v="swing_gate"/>
			<select value="180" t="barrier" v="toll_booth"/>
			<select value="25" t="barrier"/>
			<select value="10" t="traffic_calming"/>
			<select value="20" t="highway" v="traffic_signals"/>
			<select value="1"  t="crossing" v="unmarked"/>
			<select value="5"  t="crossing" v="uncontrolled"/>
			<select value="15" t="highway" v="crossing"/>
			<select value="15" t="highway" v="stop"/>
			<select value="10" t="highway" v="give_way"/>
			<select value="25" t="ford"/>

			<select value="25" t="railway" v="crossing"/>
			<select value="25" t="railway" v="level_crossing"/>
		</point>

		<point attribute="obstacle">
			<if param="avoid_toll">
				<select value="-1" t="barrier" v="toll_booth"/>
			</if>
			<if param="avoid_borders">
				<select value="-1" t="barrier" v="border_control"/>
			</if>

			<!-- Some barrier nodes are combined with maxheight or other size limits, e.g. height_restrictor or underground parking entrances. -->
			<select value="-1" t="maxheight">
				<gt value1=":height" value2="$maxheight" type="length"/>
			</select>
			<select value="-1" t="maxwidth">
				<gt value1=":width" value2="$maxwidth" type="length"/>
			</select>
			<select value="-1" t="maxwidth:physical">
				<gt value1=":width" value2="$maxwidth:physical" type="length"/>
			</select>
			<select value="-1" t="maxheight:forward">
				<gt value1=":height" value2="$maxheight:forward" type="length"/>
			</select>
			<select value="-1" t="maxheight:backward">
				<gt value1=":height" value2="$maxheight:backward" type="length"/>
			</select>

			<if param="avoid_ice_roads_fords">
				<select value="-1" t="ford" v="yes"/>
			</if>

			<!-- If access for a car is explicitly marked, the barrier is passable,
				 with a slight penalty.
				 If no access for a car is explicitly marked, the barrier is impassable.
				 Evaluate the keys in descending order of the specificity in the access hierarchy. -->
			<select value="-1" t="motorcar" v="no"/>
			<select value="-1" t="motorcar" v="agricultural"/>
			<select value="-1" t="motorcar" v="forestry"/>
			<if param="allow_private">
				<select value="180"  t="motorcar" v="private"/>
			</if>
			<select value="60"  t="motorcar" v="destination"/>
			<select value="0"  t="motorcar" v="yes"/>
			<select value="0"  t="motorcar" v="permissive"/>
			<select value="0"  t="motorcar" v="designated"/>
			<select value="0"  t="motorcar" v="customers"/>
			<select value="0"  t="motorcar" v="official"/>
			
			<select value="-1" t="motor_vehicle" v="no"/>
			<select value="-1" t="motor_vehicle" v="agricultural"/>
			<select value="-1" t="motor_vehicle" v="forestry"/>
			<if param="allow_private">
				<select value="180"  t="motor_vehicle" v="private"/>
			</if>
			<select value="60"  t="motor_vehicle" v="destination"/>
			<select value="0"  t="motor_vehicle" v="yes"/>
			<select value="0"  t="motor_vehicle" v="permissive"/>
			<select value="0"  t="motor_vehicle" v="designated"/>
			<select value="0"  t="motor_vehicle" v="customers"/>
			<select value="0"  t="motor_vehicle" v="official"/>

			<select value="-1" t="vehicle" v="no"/>
			<select value="-1" t="vehicle" v="agricultural"/>
			<select value="-1" t="vehicle" v="forestry"/>
			<if param="allow_private">
				<select value="180"  t="vehicle" v="private"/>
			</if>
			<select value="60"  t="vehicle" v="destination"/>
			<select value="0"  t="vehicle" v="yes"/>
			<select value="0"  t="vehicle" v="permissive"/>
			<select value="0"  t="vehicle" v="designated"/>
			<select value="0"  t="vehicle" v="customers"/>

			<select value="-1" t="access" v="no"/>
			<select value="-1" t="access" v="agricultural"/>
			<select value="-1" t="access" v="forestry"/>
			<if param="allow_private">
				<select value="180"  t="access" v="private"/>
			</if>
			<select value="60"  t="access" v="destination"/>
			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>
			<select value="0"  t="access" v="customers"/>
			<if param="allow_private">
				<select value="1" t="bollard" v="removable"/>
				<select value="1" t="bollard" v="rising"/>
			</if>
			<if param="profile_motorcycle">
				<select value="-1" t="motorcycle" v="no"/>
				<select value="-1" t="motorcycle" v="private"/>
				<select value="-1" t="motorcycle" v="agricultural"/>
				<select value="-1" t="motorcycle" v="forestry"/>
				<select value="0" t="motorcycle" v="yes"/>
				<select value="0" t="motorcycle" v="permissive"/>
				<select value="0" t="motorcycle" v="designated"/>
				<select value="0" t="motorcycle" v="destination"/>
				<select value="0" t="motorcycle" v="customers"/>
				<select value="0" t="motorcycle" v="official"/>
			</if>
			<select value="-1" t="barrier" v="bollard"/>
			<select value="-1" t="barrier" v="chain"/>
			<select value="-1" t="barrier" v="debris"/>
			<select value="-1" t="barrier" v="jersey_barrier"/>
			<select value="-1" t="barrier" v="block"/>
			<select value="-1" t="barrier" v="turnstile"/>
			<select value="-1" t="barrier" v="bus_trap"/>
			<select value="-1" t="barrier" v="cycle_barrier"/>
			<select value="-1" t="barrier" v="sump_buster"/>

			<if param="short_way">
				<select value="0" t="barrier" v="cattle_grid"/>
				<select value="0" t="barrier" v="border_control"/>
				<select value="0" t="barrier" v="bump_gate"/>
				<select value="0" t="barrier" v="entrance"/>
				<select value="0" t="barrier" v="sally_port"/>
				<select value="0" t="barrier" v="toll_booth"/>
				<select value="0" t="barrier" v="lift_gate"/>
				<select value="0" t="barrier" v="swing_gate"/>
				<select value="5" t="highway" v="traffic_signals"/>
				<select value="0" t="highway" v="give_way"/>
			</if>
			<select value="5"   t="barrier" v="cattle_grid"/>
			<select value="300" t="barrier" v="border_control"/>
			<select value="300" t="barrier" v="bump_gate"/>
			<select value="300" t="barrier" v="gate" /> <!-- could be on many ferries (make accessible) -->
			<select value="1"   t="barrier" v="entrance"/>
			<select value="100" t="barrier" v="sally_port"/>
			<select value="1"   t="barrier" v="toll_booth"/>
			<select value="1"   t="barrier" v="height_restrictor"/>
			<select value="1"   t="barrier" v="coupure"/>
			<!-- These 2 shouldn't be allowed per the wiki (access=no is assumed) but people often do not add the proper access tags. -->
			<select value="300" t="barrier" v="lift_gate"/>
			<select value="300" t="barrier" v="swing_gate"/>
			<!-- Without explicit access marking, barriers other than the listed values above are impassable to a car. -->
			<select value="10" t="traffic_calming"/>
			<select value="5"  t="highway" v="give_way"/>
			<select value="15"  t="highway" v="stop"/>
			<!-- introduction to not drive through city -->
			<select value="15" t="highway" v="traffic_signals"/>
			<select value="300" t="amenity" v="ferry_terminal"/>

			<select value="25" t="ford"/>
		</point>
	</routingProfile>

	<routingProfile name="bicycle" baseProfile="bicycle" restrictionsAware="true" minSpeed="5" defaultSpeed="10" maxSpeed="33" sharpTurn="6" slightTurn="6" followSpeedLimitations="false" onewayAware="true" heuristicCoefficient="1.4">
		<attribute name="penaltyForReverseDirection" value="60" /> <!-- bike: ~ 1 minute to turn back -->

		<!-- Turn penalties for short_way=yes -->
		<attribute name="shortWaySharpTurn" value = "0"/>
		<attribute name="shortWaySlightTurn" value = "0"/>

		<!-- <attribute name="relaxNodesIfStartDistSmallCoeff" value="2.5"/>  -->
		<!-- New ROUTING API -->

		<!--<parameter id="driving_style" name="Driving style" description="Safe, fast or balanced driving" type="numeric" values="0,1,2" valueDescriptions="Safety,Balance,Speed"/>-->
		<!--<parameter id="relief_smoothness_factor" name="Relief smoothness factor" description="More plains or more hills" type="numeric" values="0,1,2" valueDescriptions="More plains,Balance,More hills"/>-->

		<parameter id="short_way" name="Short way" description="Short way" type="boolean"/>
		<parameter id="driving_style_prefer_unpaved" group="driving_style" name="Prefer unpaved roads" description="Prefer unpaved roads" type="boolean"/>
		<parameter id="driving_style_safety" group="driving_style" name="Safety" description="" type="boolean"/>
		<parameter id="driving_style_balance" group="driving_style" name="Balance" description="" type="boolean" default="true"/>
		<parameter id="driving_style_speed" group="driving_style" name="Speed" description="" type="boolean"/>

		<parameter id="relief_smoothness_factor_more_plains" group="relief_smoothness_factor" name="More plains" description="" type="boolean"/>
		<parameter id="relief_smoothness_factor_plains" group="relief_smoothness_factor" name="Plains" description="" type="boolean" default="true"/>
		<parameter id="relief_smoothness_factor_hills" group="relief_smoothness_factor" name="Hills" description="" type="boolean"/>
		<parameter id="avoid_unpaved" name="Avoid unpaved roads" description="Avoid unpaved roads" type="boolean"/>
		<parameter id="avoid_ferries" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		<parameter id="avoid_stairs" name="Avoid stairs" description="Avoid stairs" type="boolean"/>
		<parameter id="avoid_borders" name="Avoid border crossing" description="Avoid crossing a border into another country" type="boolean"/>
		<parameter id="avoid_footways" name="Avoid footways" description="Avoid footways" type="boolean"/>
		<parameter id="allow_motorway" name="Allow motorways" description="Allow motorways" type="boolean"/>
		<parameter id="avoid_tunnels" name="Avoid tunnels" description="Avoid tunnels" type="boolean"/>
		<parameter id="avoid_fords" name="Avoid fords" description="Avoid fords" type="boolean"/>
		<parameter id="allow_private" name="Allow private access" description="Allow access to private areas" type="boolean"/>
		<parameter id="avoid_sett" name="Avoid sett" description="Streets and paths which are paved with sett are avoided quite strictly (they are already avoided in standard mode)." type="boolean" default="false"/>
		<parameter id="avoid_cobblestone" name="Avoid cobblestone" description="Streets and paths which are paved with cobblestone are avoided quite strictly (they are already avoided in standard mode)." type="boolean" default="false"/>
		<parameter id="height_obstacles" name="Use elevation data" description="Use terrain elevation data provided by SRTM, ASTER and EU-DEM" type="boolean" default="false"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="highway" v="proposed"/>
			<select value="-1" t="highway" v="construction"/>
			<select value="-1" t="construction" v="yes"/>

			<if param="allow_motorway">
				<select value="-1" t="access" v="no"/>
				<select value="-1" t="access" v="private"/>
				<select value="-1" t="motorroad" v="yes"/>
				<select value="-1" t="bicycle" v="no"/>
				<select value="-1" t="vehicle" v="no"/>
				<select value="1" t="highway" v="motorway"/>
				<select value="1" t="highway" v="motorway_link"/>
				<select value="1" t="highway" v="trunk"/>
				<select value="1" t="highway" v="trunk_link"/>
			</if>

			<if param="avoid_ferries">
			    <select value="-1" t="route" v="ferry"/>
			    <select value="-1" t="route" v="boat"/>
			</if>

			<if param="avoid_stairs">
			    <select value="-1" t="highway" v="steps"/>
			</if>
			<if param="avoid_fords">
			    <select value="-1" t="ford" v="yes"/>
			</if>
			<select value="-1" t="highway" v="motorway"/>
			<select value="-1" t="highway" v="motorway_link"/>
			<select value="-1" t="motorroad" v="yes"/>
			<!-- lines above: These lines should be moved here
			to make sure that motorways are excluded if they
			are not explicitly allowed by the user.-->
			<select value="-1" t="highway" v="elevator"/>
			<select value="-1" t="bicycle" v="no"/>
			<select value="1"  t="bicycle" v="yes"/>
			<select value="1"  t="bicycle" v="permissive"/>
			<select value="1"  t="bicycle" v="designated"/>
			<select value="1"  t="cycleway:bicycle" v="designated"/>
			<select value="1"  t="bicycle" v="destination"/>
			<!-- <select value="1"  t="bicycle" v="official"/> Already done by an entity_convert when creating the map files -->
			<!-- <select value="-1"  t="bicycle" v="use_sidepath"/> Already done by an entity_convert when creating the map files -->
			<select value="1"  t="bicycle" v="dismount"/>

			<select value="-1" t="sac_scale" v="demanding_mountain_hiking"/>
			<select value="-1" t="sac_scale" v="alpine_hiking"/>
			<select value="-1" t="sac_scale" v="demanding_alpine_hiking"/>
			<select value="-1" t="sac_scale" v="difficult_alpine_hiking"/>
			<select value="-1" t="mtb:scale" v="5"/>
			<select value="-1" t="mtb:scale" v="6"/>
			<if param="allow_private">
				<select value="1" t="vehicle" v="private"/>
			</if>
			<select value="-1" t="vehicle" v="private"/>
			<select value="-1" t="vehicle" v="agricultural"/>
			<select value="-1" t="vehicle" v="forestry"/>
			<select value="1"  t="vehicle" v="yes"/>
			<select value="1"  t="vehicle" v="permissive"/>
			<select value="1"  t="vehicle" v="designated"/>
			<select value="1"  t="vehicle" v="destination"/>
			
			<select value="-1" t="access" v="no"/>
			<if param="allow_private">
				<select value="1" t="vehicle" v="private"/>
			</if>
			<select value="-1" t="access" v="private"/>
			<select value="1" t="access" v="agricultural"/>
			<select value="1" t="access" v="forestry"/>
			<select value="1"  t="access" v="yes"/>
			<select value="1"  t="access" v="permissive"/>
			
			<select value="-1" t="vehicle" v="no"/>
			<select value="1" t="highway" v="cycleway"/>
			<select value="1" t="route_bicycle"/>
			<!--<select value="-1" t="crossing" v="no"/>--> <!-- See https://github.com/osmandapp/Osmand/issues/6678 -->

			<if param="driving_style_safety">
				<select value="-1" t="highway" v="trunk"/>
				<select value="-1" t="highway" v="trunk_link"/>
			</if>
			<select value="1" t="highway" v="trunk"/>
			<select value="1" t="highway" v="trunk_link"/>
			<!-- a user indicated a trunk road in England that was a
			a necessary link. So only in safety style trunk is excluded now. -->
			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="path"/>
			<select value="1" t="highway" v="footway"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="1" t="highway" v="pedestrian"/>
			<select value="1" t="highway" v="byway"/>
			<select value="1" t="public_transport" v="platform"/>
			<select value="1" t="man_made" v="pier"/>
			<select value="1" t="highway" v="services"/>
			<select value="1" t="highway" v="bridleway"/>
			<select value="1" t="highway" v="steps"/>
			<select value="1" t="route" v="ferry"/>
			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="0" t="cycleway" v="opposite_lane"/>
			<select value="0" t="cycleway" v="opposite_track"/>
			<select value="0" t="cycleway" v="opposite_share_busway"/>
			<select value="0" t="cycleway" v="opposite"/>
			<select value="0" t="oneway:bicycle" v="no"/>
			<select value="1" t="oneway:bicycle" v="yes"/>
			<select value="-1" t="oneway:bicycle" v="-1"/>
			
			<select value="1" t="oneway:vehicle" v="yes"/>
			<select value="0" t="oneway:vehicle" v="no"/>
			<select value="-1" t="oneway:vehicle" v="-1"/>
			<select value="1" t="vehicle:backward" v="no"/>
			<select value="-1" t="vehicle:forward" v="no"/>
			<select value="1" t="bicycle:backward" v="no"/>
			<select value="-1" t="bicycle:forward" v="no"/>

			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
            <!-- Following line because junction=circular is converted to roundabout, but is not necessarily oneway=yes -->
			<select value="0" t="oneway" v="no"/>
			<select value="1" t="roundabout" v="yes"/>
			<select value="1" t="junction" v="roundabout"/>
		</way>

		<way attribute="speed" type="speed">
			<select value="$maxspeed:bicycle" t="maxspeed:bicycle"/>
			<select value="1.3" t="highway" v="steps"/>
			<select value="10" t="route"   v="ferry"/>
			<select value="6" t="bicycle" v="dismount"/>
			<if param="driving_style_speed">
				<select value="19" t="highway" v="motorway"/>
				<select value="19" t="highway" v="motorway_link"/>
				<select value="19" t="highway" v="trunk"/>
				<select value="19" t="highway" v="trunk_link"/>
				<select value="19" t="highway" v="primary"/>
				<select value="19" t="highway" v="primary_link"/>
				<select value="19" t="highway" v="secondary"/>
				<select value="19" t="highway" v="secondary_link"/>
				<select value="19" t="highway" v="tertiary"/>
				<select value="19" t="highway" v="tertiary_link"/>
				<select value="33" t="route_bicycle"/>
				<!-- Line above: Command should be moved up here, to be applied more
				often. If a residential way is marked route bicycle, this higher value will
				now apply. The same for all the categories that follow. This makes
				sense even in speed style, because if you stay away from main roads,
				you avoid traffic lights (and thus save time). So main roads will be
				avoided if there is an official cycle route nearby (should be fast). --> 
				<!-- Line above: Is there a possibility to EXCLUDE this command if avoid unpaved is set? -->
				<select value="19" t="highway" v="residential"/>
				<select value="18" t="highway" v="unclassified"/>
				<select value="33" t="highway" v="cycleway"/>
				<select value="33" t="path_bicycle_designated"/>
				<select value="28" t="bicycle" v="designated"/>
				<select value="8.5" t="highway" v="track"/>
				<select value="5" t="footway" v="sidewalk"/>
				<!-- Line above: When the footway is specifically a sidewalk, downgrade, as
 				sidewalks tend to not be designed to accomodate things going faster than walking speed -->
				<select value="7" t="highway" v="footway"/>
				<select value="6" t="highway" v="path"/>
			</if>
			<select value="6" t="highway" v="motorway"/>
			<select value="6" t="highway" v="motorway_link"/>
			<select value="7" t="highway" v="trunk"/>
			<select value="7" t="highway" v="trunk_link"/>

			<select value="20" t="cycleway" v="sidepath"/>
			<select value="20" t="cycleway" v="lane"/>
			
			<!-- Line above: This tag is used for cycleways along main
			roads. These need to be downgraded before the 31 kmh
			for bicycle designated are set. -->

			<ifnot param="avoid_unpaved">
				<select value="31" t="bicycle" v="designated"/>
				<select value="31" t="cycleway:bicycle" v="designated"/>
			</ifnot>
			<select value="21" t="bicycle" v="designated"/>

			<!-- Lines above: This fixed value for bicycle=designated will not be applied in 
			"avoid unpaved" mode. Reason: The kmh value that we set here is fixed, it can not
			be downgraded later. Generally, it makes sense to set a fixed value here for
			bicycle=designated.  Otherwise there would be one major error: The combination of
			designated AND asphalt (frequently found ) would get a much lower value than just
			designated alone. -->

			<if param="driving_style_safety">
				<select value="7" t="highway" v="primary"/>
				<select value="7" t="highway" v="primary_link"/>
				<select value="9" t="highway" v="secondary"/>
				<select value="9" t="highway" v="secondary_link"/>
				<select value="14" t="highway" v="tertiary"/>
				<select value="14" t="highway" v="tertiary_link"/>
				<select value="18" t="highway" v="residential"/>
				<select value="24" t="highway" v="cycleway"/>
				<select value="33" t="route_bicycle"/>
				<!-- The integration of "bicycle routes" offers great possibilities.
				But still there are many examples where Osmand can even find
				a better alternative. Now, three choices  help to combine the
				strengths of the existing routing with bicycle routes:
				First, if a path, track or footway is a cycle route, it gets a big upgrade.
				Second, bicycle routes that lead over main roads are not upgraded. They
				are normally not especially safe or attractive. Example: In Berlin, one
				cycle route is on "Heerstrasse" which is not good for cycling at all. And
				for some cycle routes in Berlin and Vienna there are better alternatives.
				Third, there are even some unpaved bicycle routes. These get a downgrade
				later. And if a bicycle route has no surface tag, there is a slight risk that
				it is unpaved. Therefore, it will be downgraded a little bit. --> 
				<select value="22" t="highway" v="track"/>
				<select value="20" t="highway" v="path"/>
				<select value="5" t="footway" v="sidewalk"/>
				<!-- Line above: When the footway is specifically a sidewalk, downgrade, as
 				sidewalks have a very high rate of fatalities for cyclists in North America -->
				<select value="19" t="highway" v="footway"/>
			</if>

			<select value="10" t="highway" v="primary"/>
			<select value="10" t="highway" v="primary_link"/>
			<select value="13" t="highway" v="secondary"/>
			<select value="13" t="highway" v="secondary_link"/>
			<select value="18" t="highway" v="tertiary"/>
			<select value="18" t="highway" v="tertiary_link"/>
			<select value="35" t="route_bicycle"/>
			<select value="23" t="highway" v="residential"/>
			<select value="24" t="highway" v="cycleway"/>
			<select value="23" t="highway" v="unclassified"/>
			<select value="11" t="highway" v="service"/>
			<select value="22" t="highway" v="track"/>
			<select value="19" t="highway" v="path"/>
			<select value="15" t="highway" v="footway"/>
			<select value="19" t="highway" v="road"/>
			<select value="24" t="highway" v="living_street"/>
			<select value="10" t="highway" v="pedestrian"/>

			<select value="10"  t="highway" v="byway"/>
			<select value="2" t="public_transport" v="platform"/>
			<select value="2" t="highway" v="services"/>
			<select value="2" t="highway" v="bridleway"/>
			<select value="14.5"/>
		</way>

		<way attribute="obstacle_srtm_alt_speed">
			<if param="height_obstacles">
				<gt value1="-100" value2=":incline">
					<select value="-1" t="osmand_highway_integrity_brouting_low" v="yes"/>
					<select value="-1" t="highway" v="path"/>
					<select value="-1" t="highway" v="track"/>
				</gt>
				<gt value1="-35" value2=":incline">
					<select value="30" t="osmand_highway_integrity_brouting_low" v="yes"/>
					<select value="30" t="highway" v="path"/>
					<select value="25" t="highway" v="track"/>
				</gt>
				<gt value1="-17" value2=":incline">
					<select value="7.7" t="osmand_highway_integrity_brouting_low" v="yes"/>
					<select value="7.7" t="highway" v="path"/>
					<select value="6.4" t="highway" v="track"/>
				</gt>
				<if param="relief_smoothness_factor_more_plains">
					<gt value1="3" value2=":incline">
						<select value="2"/>
					</gt>
					<gt value1="7" value2=":incline">
						<select value="12"/>
					</gt>
					<gt value1="13" value2=":incline">
						<select value="30"/>
					</gt>
					<gt value1="25" value2=":incline">
						<select value="50"/>
					</gt>
					<select value="74"/>
				</if>
				<if param="relief_smoothness_factor_hills">
					<gt value1="1" value2=":incline">
						<select value="61"/>
					</gt>
					<gt value1="3" value2=":incline">
						<select value="19.7"/>
					</gt>
					<gt value1="7" value2=":incline">
						<select value="7.5"/>
					</gt>
					<gt value1="13" value2=":incline">
						<select value="3"/>
					</gt>
					<gt value1="25" value2=":incline">
						<select value="0.5"/>
					</gt>
					<select value="0.3"/>
				</if>
				<gt value1="3" value2=":incline">
					<select value="2"/>
				</gt>
				<gt value1="7" value2=":incline">
					<select value="8"/>
				</gt>
				<gt value1="13" value2=":incline">
					<select value="16"/>
				</gt>
				<gt value1="25" value2=":incline">
					<select value="32"/>
				</gt>
				<select value="48"/>
			</if>
		</way>

		<way attribute="priority">

			<select value="0.1" t="bicycle" v="private"/>
			<select value="0.2" t="bicycle" v="destination"/>
			<select value="0.5" t="bicycle" v="use_sidepath"/>
			<select value="0.3" t="highway" v="steps"/>
	  		<!--	<select value="0.05" t="access" v="private"/>-->
			<select value="0.3" t="indoor" v="yes"/>
			<select value="0.1" t="barrier" v="debris"/>

			<if param="avoid_unpaved">
				<select value="0.3" t="osmand_highway_integrity_brouting" v="3"/>
				<select value="0.28" t="osmand_highway_integrity_brouting" v="4"/>
				<select value="0.27" t="osmand_highway_integrity_brouting" v="5"/>
				<select value="0.25" t="osmand_highway_integrity_brouting" v="6"/>
				<select value="0.2" t="osmand_highway_integrity_brouting" v="7"/>
				<select value="0.15" t="osmand_highway_integrity_brouting" v="8"/>
				<select value="0.1" t="osmand_highway_integrity_brouting" v="9"/>
				<select value="0.05" t="osmand_highway_integrity_brouting" v="10"/>

				<!--select value="0.4" t="tracktype" v="grade2"/>
				<select value="0.1" t="tracktype" v="grade3"/>
				<select value="0.1" t="tracktype" v="grade4"/>
				<select value="0.1" t="tracktype" v="grade5"/>
				<select value="0.1" t="surface" v="unpaved"/>
				<select value="0.4" t="surface" v="compacted"/>
				<select value="0.1" t="surface" v="dirt"/>
				<select value="0.1" t="surface" v="earth"/>
				<select value="0.1" t="surface" v="gravel"/>
				<select value="0.4" t="surface" v="fine_gravel"/>
				<select value="0.1" t="surface" v="grass"/>
				<select value="0.1" t="surface" v="ground"/>
				<select value="0.1" t="surface" v="mud"/>
				<select value="0.1" t="surface" v="pebblestone"/>
				<select value="0.1" t="surface" v="sand"/>-->
				<select value="0.1" t="mtb:scale" v="1"/>
				<select value="0.1" t="mtb:scale" v="2"/>
				<select value="0.1" t="class:bicycle:mtb" v="-1"/>
				<select value="0.1" t="class:bicycle" v="-1"/>
				<select value="0.05" t="class:bicycle" v="-2"/>
				<select value="0.03" t="class:bicycle" v="-3"/>
				<!--select value="0.6" t="surface" v="wood"/>-->
			</if>

			<if param="driving_style_prefer_unpaved">
				<select value="0.1" t="osmand_highway_integrity_brouting" v="0"/>
				<select value="0.2" t="osmand_highway_integrity_brouting" v="1"/>
				<select value="0.35" t="osmand_highway_integrity_brouting" v="2"/>
				<select value="0.38" t="osmand_highway_integrity_brouting" v="3"/>
				<select value="0.4" t="osmand_highway_integrity_brouting" v="4"/>
			</if>

			<if param="avoid_sett">
				<select value="0.2" t="surface" v="sett"/>
			</if>
			<if param="avoid_cobblestone">
				<select value="0.1" t="surface" v="cobblestone"/>
				<select value="0.05" t="surface" v="unhewn_cobblestone"/>
			</if>
            <!-- Lines above: Even in the avoid_sett option, sett and cobblestone should not be downgraded to less than 20%.
            The reason is that you can always dismount and push your bike. Or to put it the other way round:
            If we downgrade sett to 1% (as it was before), then to avoid just 100 meters of sett, the routing would make a detour of 10 kilometers.
            The 1% setting also led to long calculation times (especially if you started routing at a point entirely surrounded by cobblestone streets). -->
			
			<select value="1.0" t="bicycle" v="dismount"/>
			<select value="1.0" t="cycleway" v="sidepath"/>
			<!-- Following lines: I would suggest to change
			the order, according to the following scheme:
			
			1.) First step: Downgrade all the ways that have a really bad
			surface (mud, grade5 etc). Those should be downgraded in any
			case (no matter if path/primary/cycleway/etc). Also, 
			"cobblestone" should already be downgraded here (otherwise,
			it would be ignored too often, for example because it is
			overruled by "bicycle=yes").
			
			2.) Upgrade cycle lanes and cycle tracks. Normally, those are
			paved (great), but they go along main roads, so I suggest a
			factor of 1.6/1.5 (which is already a big upgrade).
			
			3.) Assign a neutral factor to main roads. These are
			normally paved, but often, there is no tag for the surface:
			It makes no sense to upgrade only those main roads that just
			happen to be tagged with paved, asphalt, etc.
			
			4.) Upgrade all tracks, paths etc with a paved surface.
			Very important to do this before "bicycle=yes" (etc).
			Example: In parks, forests or fields, tracks are often
			tagged with bicycle=yes. But only a few tracks are tagged
			as paved. So it is important to check the "paved" first,
			so that paved / asphalt tracks gets a priority. Otherwise, 
			all tracks with bicycle=yes would be treated the same.
			
			5.) Only in "avoid unpaved" mode: Downgrade all paths and tracks
			now, even if they might later be marked bicycle=yes/official/etc.
			
			6.) Upgrade all ways that are tagged bicycle=yes/official etc.
			(this should only be done after the distinction between
			unpaved and paved/asphalt/etc )
			
			7.) Downgrade difficult surfaces such as sand, grass etc. 
			This is done late, because sand / grass are not necessarily
			very bad. A tag like "sand" is often put for compacted surfaces.
			So if a sand way is marked "bicycle=yes" before, it should be good.
			Accordingly, some tags that lead only to a slight upgrade are also
			put here.
			
			8.) Downgrade paths, tracks etc. If up to now, no surface or bicycle
			tag has been detected, the path has a certain risk of having a bad
			surface (we just do not know). To make sure, all smaller ways are
			downgraded now.-->

			<select value="0.1" t="sac_scale" v="mountain_hiking"/>
			<select value="1.5" t="class:bicycle" v="3"/>
			<select value="1.3" t="class:bicycle" v="2"/>
			<select value="1.1" t="class:bicycle" v="1"/>
			<select value="0.5" t="class:bicycle" v="-1"/>
			<select value="0.1" t="class:bicycle" v="-2"/>
			<select value="0.05" t="class:bicycle" v="-3"/>
			<select value="0.5" t="class:bicycle:mtb" v="3"/>
			<select value="0.3" t="class:bicycle:mtb" v="2"/>
			<select value="0.2" t="class:bicycle:mtb" v="1"/>
			<select value="0.1" t="class:bicycle:mtb" v="-1"/>
			<select value="0.3" t="mtb:scale" v="1"/>
			<select value="0.2" t="mtb:scale" v="2"/>
			<select value="0.1" t="mtb:scale" v="3"/>
			<select value="0.05" t="mtb:scale" v="4"/>
			<select value="0.5" t="tracktype" v="grade5"/>
			<select value="0.2" t="smoothness" v="horrible"/>
			<select value="0.15" t="smoothness" v="very_horrible"/>
			<select value="0.1" t="smoothness" v="impassable"/>
			<select value="0.61" t="osmand_highway_integrity_brouting" v="5"/>
			<select value="0.4" t="osmand_highway_integrity_brouting" v="6"/>
			<select value="0.3" t="osmand_highway_integrity_brouting" v="7"/>
			<select value="0.2" t="osmand_highway_integrity_brouting" v="8"/>
			<select value="0.1" t="osmand_highway_integrity_brouting" v="9"/>
			<select value="0.05" t="osmand_highway_integrity_brouting" v="10"/>
			<select value="0.65" t="surface" v="cobblestone"/>
			<select value="0.7" t="surface" v="sett"/>
			<select value="0.5" t="surface" v="unhewn_cobblestone"/>
             <!-- Three lines above: Added "sett" and "unhewn_cobblestone" which are also needed here.
            the values for sett and cobblestone should not be too far apart, because "sett" is not used
            too strictly in maps (often used for cobblestone that is only SLIGHTLY flattened-->

			<select value="3.2" t="cycleway" v="lane"/>
			<select value="3.2" t="cycleway:both" v="lane"/>
			<select value="3.2" t="cycleway" v="opposite_lane"/>
			<select value="3.2" t="cycleway" v="opposite"/>
			<select value="2.9" t="cycleway" v="share_busway"/>
			<select value="2.9" t="cycleway" v="opposite_share_busway"/>
			<select value="2.9" t="cycleway:both" v="share_busway"/>
			<select value="3.3" t="cycleway" v="track"/>
			<select value="3.3" t="cycleway:both" v="track"/>
			<select value="3.3" t="cycleway" v="opposite_track"/>
			<select value="2" t="cycleway" v="shared"/>
			<select value="2" t="cycleway" v="shared_lane"/>
			<select value="2" t="cycleway:both" v="shared_lane"/>
			<select value="1.0" t="segregated" v="yes"/>

			<select value="1.0" t="highway" v="primary"/>
			<select value="1.0" t="highway" v="secondary"/>
			<select value="1.0" t="highway" v="tertiary"/>
			<select value="1.0" t="highway" v="service"/>
			<select value="0.6" t="highway" v="footway"/>

			<if param="driving_style_prefer_unpaved">
				<select value="0.05" t="surface" v="asphalt"/>
				<select value="0.07" t="surface" v="chipseal"/>
				<select value="0.1" t="surface" v="paved"/>
				<select value="0.3" t="surface" v="concrete"/>
				<select value="0.4" t="surface" v="paving_stones"/>
			</if>

			<ifnot param="avoid_footways">
				<!-- used if avoid_footways=false and "highway"="*" and surface is asphalt, paved ...
				when avoid_footways=true tag highway=footway more important than type of surface -->
				<select value="1.35" t="surface" v="asphalt"/>
				<select value="1.35" t="surface" v="chipseal"/>
				<select value="1.35" t="surface" v="paved"/>
				<select value="1.35" t="surface" v="concrete"/>
				<select value="1.30" t="surface" v="paving_stones"/>
			</ifnot>

			<if param="avoid_unpaved">
				<select value="0.3" t="highway" v="track"/>
				<select value="0.2" t="highway" v="path"/>
			</if>

			<if param="avoid_footways">
				<select value="1.8" t="bicycle" v="official"/>
				<select value="1.8" t="bicycle" v="designated"/>
				<select value="1.3" t="bicycle" v="yes"/>
				<select value="0.1" t="highway" v="footway"/>
			</if>

			<select value="1.35" t="surface" v="asphalt"/>
			<select value="1.35" t="surface" v="chipseal"/>
			<select value="1.35" t="surface" v="paved"/>
			<select value="1.35" t="surface" v="concrete"/>
			<select value="1.30" t="surface" v="paving_stones"/>
			<select value="1.35" t="osmand_highway_integrity_brouting" v="0"/>
			<select value="1.3" t="osmand_highway_integrity_brouting" v="1"/>

			<select value="3" t="highway" v="cycleway"/>
			<!-- I have downgraded cycleways here and upgraded their
			kmh value at the same time. First, cycleways with
			asphalt yes should get a slight upgrade (there are also
			cycleways with compacted). Second, the end value for
			cycleways should be lower than the value for paths and
			footways with bicycle designated. Cycleways are often
			along main roads, whereas the attractive ways for
			bicycles (in parks or along rivers) are normally tagged
			bicycle=designated or yes. -->

			<select value="1.8" t="bicycle" v="official"/>
			<select value="1.8" t="bicycle" v="designated"/>
			<select value="1.3" t="bicycle" v="yes"/>
			<select value="0.3" t="footway" v="sidewalk"/>
			<!-- the value for bicycle=yes needs to be smaller than the
 			values for paved and asphalt. Reason: Often you have areas with
			several paths that are tagged bicycle yes, but only some of these
			paths are also tagged paved. In that case, the paved paths should
 			get a higher priority. -->

			<select value="1.1" t="surface" v="compacted"/>
			<select value="1.1" t="surface" v="fine_gravel"/>
			<select value="1.0" t="surface" v="wood"/>
			<select value="1.1" t="osmand_highway_integrity_brouting" v="2"/>
			<select value="0.92" t="osmand_highway_integrity_brouting" v="3"/>
			<select value="0.8" t="osmand_highway_integrity_brouting" v="4"/>
			<select value="1.3" t="smoothness" v="excellent"/>
			<select value="1.0" t="smoothness" v="good"/>
			<select value="0.9" t="smoothness" v="intermediate"/>
			<select value="1.3" t="tracktype" v="grade1"/>
			<select value="1.15" t="tracktype" v="grade2"/>
			<select value="1.0" t="tracktype" v="grade3"/>
			<select value="0.7" t="tracktype" v="grade4"/>
			<select value="0.9" t="surface" v="gravel"/>
			<select value="0.8" t="surface" v="unpaved"/>
			<select value="0.8" t="smoothness" v="bad"/>
			<select value="0.50" t="surface" v="dirt"/>
			<select value="0.45" t="surface" v="sand"/>
			<select value="0.75" t="surface" v="earth"/>
			<select value="0.65" t="surface" v="grass"/>
			<select value="0.75" t="surface" v="ground"/>
			<select value="0.5" t="surface" v="mud"/>
			<select value="0.5" t="smoothness" v="very_bad"/>
			<select value="1.2" t="route_bicycle"/> 
			<!-- If a part of a bicycle route has a surface tag, it will have
			been upgraded or downgraded up to this point. The value
			1.2 here is applied to all bicycle routes with no surface tag. -->
			<select value="1.25" t="highway" v="residential"/>
			<!-- New: The factor for residential is better placed here, so that we can
			first downgrade all residential that are tagged with a bad surface.
			Overpass shows many cases of residential with sand, unpaved, etc.
			And: Even in big cities, the surface of residential is often not tagged
			at all. So residential roads that have no surface tag, now get a slightly
			lower value than those with asphalt or paved. The value of 1.25 is
			right because it should be close to the 1.35 for paved. Reason: Many 
			residential roads still have no surface tag at all. Most of them are 
			asphalt (but we do not know for sure). So, they should be downgraded
			a bit (to take into account that they might be unpaved), but not too much
			(because most of them will still be paved). -->

			<select value="1.25" t="highway" v="living_street"/>
			<select value="1.25" t="highway" v="unclassified"/>
			<select value="1.0" t="highway" v="road"/>
			<select value="0.7" t="highway" v="track"/>
			<select value="0.6" t="highway" v="path"/>

			<if param="driving_style_speed">
				<select value="1.4" t="highway" v="motorway"/>
				<select value="1.3" t="highway" v="motorway_link"/>
				<select value="1.4" t="highway" v="trunk"/>
				<select value="1.3" t="highway" v="trunk_link"/>
			</if>
			<select value="0.5" t="highway" v="motorway"/>
			<select value="0.5" t="highway" v="motorway_link"/>
			<select value="0.5" t="highway" v="trunk"/>
			<select value="0.5" t="highway" v="trunk_link"/>

		</way>

		<way attribute="destination_priority">
		     <select value="0.5" t="tunnel" v="yes"/>
		</way>

		<point attribute="obstacle_time">
			<select value="10" t="barrier" v="cycle_barrier"/>
			<select value="15" t="barrier" v="gate"/>
			<select value="20" t="barrier" v="lift_gate"/>
			<select value="20" t="barrier" v="swing_gate"/>
			<select value="15" t="barrier" v="log"/>
			<select value="5"  t="barrier"/>
			<select value="15" t="highway" v="traffic_signals"/>
			<select value="10" t="crossing" v="unmarked"/>
			<select value="5"  t="crossing" v="uncontrolled"/>
			<select value="15" t="crossing" v="traffic_signals"/>
			<select value="15" t="highway" v="stop"/>
			<select value="7"  t="highway" v="give_way"/>
			<select value="200" t="ford"/>
			<select value="25" t="railway" v="crossing"/>
			<select value="25" t="railway" v="level_crossing"/>
			<select value="5"  t="railway" v="tram_level_crossing"/>
		</point>

		<point attribute="obstacle">
			<if param="avoid_borders">
				<select value="-1" t="barrier" v="border_control"/>
			</if>

			<select value="0" t="red_turn:straight:bicycle" v="yes"/>
			<if param="driving_style_safety">
				<select value="16" t="crossing" v="traffic_signals"/>
				<select value="16" t="crossing" v="island;traffic_signals"/>
				<select value="27" t="highway" v="traffic_signals"/>
			</if>
			<if param="short_way">
				<select value="3" t="crossing" v="traffic_signals"/>
				<select value="2" t="crossing" v="island;traffic_signals"/>
				<select value="3" t="highway" v="traffic_signals"/>
			</if>
			<!-- Lines above: These values are only a workaround. They apply until 
			one issue is resolved: The triple counting of traffic lights at main
			junctions. This can hopefully be resolved within map rendering.
			Any combination of values that we put here (into the routing.xml)
			leads to routing errors. The above is only a compromise to minimize
			those errors.-->
			
			<select value="6" t="crossing" v="traffic_signals"/>
			<select value="1" t="crossing" v="uncontrolled"/>
			<select value="3" t="crossing" v="unmarked"/>
			<select value="1" t="crossing" v="island"/>
			<!-- Lines above: These values should not get too high, because
			in maps, crossing=island is often combined with either two nodes
			"crossing=unmarked" or two nodes "crossing=traffic_signals".
			So, often you get triple counting here as well. And the crossing
			of a main road very often cannot get a penalty at all: Often,
			a crossing is not marked as a crossing and this makes it impossible
			to apply any penalty. So it would make no sense to just apply a high
			penalty on some cases. -->
			<select value="5" t="crossing" v="island;traffic_signals"/>
			<select value="12" t="highway" v="traffic_signals"/>
			<select value="55"  t="highway" v="steps"/>
			<select value="15"  t="bicycle" v="dismount"/>
			<select value="200" t="ford" v="yes"/>
			<select value="300" t="amenity" v="ferry_terminal"/>

			<!-- ignore bicycle=no on highway=crossing -->
			<select value="0" t="highway" v="crossing"/>

			<select value="-1" t="bicycle" v="no"/>
			<select value="0"  t="bicycle" v="yes"/>
			<select value="0"  t="bicycle" v="permissive"/>
			<select value="0"  t="bicycle" v="designated"/>
			<select value="0"  t="bicycle" v="official"/>

			<select value="-1" t="vehicle" v="no"/>
			<select value="0" t="vehicle" v="agricultural"/>
			<select value="0" t="vehicle" v="forestry"/>
			<select value="0"  t="vehicle" v="yes"/>
			<select value="0"  t="vehicle" v="permissive"/>
			<select value="0"  t="vehicle" v="designated"/>

			<select value="-1" t="access" v="no"/>
			<select value="0" t="access" v="agricultural"/>
			<select value="0" t="access" v="forestry"/>
			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>
			<if param="allow_private">
				<select value="180"  t="access" v="private"/>
			</if>
			<select value="-1" t="access" v="private"/>

			<select value="1"   t="barrier" v="height_restrictor"/>
			<select value="1"   t="barrier" v="coupure"/>

			<!--<select value="-1" t="crossing" v="no"/>-->

		</point>

		<way attribute="penalty_transition">
			<if param="avoid_tunnels">
				<select value="200" t="tunnel" v="yes"/>
				<select value="150" t="tunnel" v="avalanche_protector"/>
			</if>
			<if param="driving_style_balance">
				<select value="5" t="highway" v="residential"/>
			</if>
			<!-- <if param="driving_style_balance">
				<select value="1" t="highway" v="trunk"/>
				<select value="2" t="highway" v="trunk_link"/>
				<select value="3" t="highway" v="primary"/>
				<select value="4" t="highway" v="primary_link"/>
				<select value="6" t="highway" v="secondary"/>
				<select value="7" t="highway" v="secondary_link"/>
				<select value="20" t="highway" v="tertiary"/>
				<select value="26" t="highway" v="tertiary_link"/>
				<select value="50" t="highway" v="residential"/>
				<select value="50" t="highway" v="living_street"/>
				<select value="52" t="highway" v="service"/>
				<select value="58" t="highway" v="track"/>
				<select value="60" t="highway" v="footway"/>
				<select value="65" t="highway" v="path"/>
				<select value="70"/>
			</if>
			<if param="driving_style_speed">
				<select value="3" t="highway" v="trunk"/>
				<select value="4" t="highway" v="trunk_link"/>
				<select value="7" t="highway" v="primary"/>
				<select value="8" t="highway" v="primary_link"/>
				<select value="10" t="highway" v="secondary"/>
				<select value="12" t="highway" v="secondary_link"/>
				<select value="80" t="highway" v="tertiary"/>
				<select value="51" t="highway" v="tertiary_link"/>
				<select value="52" t="highway" v="residential"/>
				<select value="52" t="highway" v="living_street"/>
				<select value="85" t="highway" v="service"/>
				<select value="86" t="highway" v="track"/>
				<select value="87" t="highway" v="footway"/>
				<select value="87" t="highway" v="path"/>
				<select value="90"/>
			</if>-->
		</way>
	</routingProfile>

	<routingProfile name="pedestrian" baseProfile="pedestrian" restrictionsAware="false" minSpeed="2" defaultSpeed="4" maxSpeed="10" sharpTurn="0" slightTurn="0" followSpeedLimitations="false" onewayAware="false">
		<attribute name="penaltyForReverseDirection" value="10" /> <!-- foot: almost zero time to turn around -->

		<attribute name="heuristicCoefficient" value="1.2" />
		<!-- NEW ROUTING API -->
		<parameter id="avoid_ferries" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		<parameter id="avoid_motorway" name="Avoid motorways" description="Avoid motorways" type="boolean"/>
		<parameter id="avoid_tunnels" name="Avoid tunnels" description="Avoid tunnels" type="boolean"/>
		<parameter id="avoid_stairs" name="Avoid stairs" description="Avoid stairs" type="boolean"/>
		<parameter id="avoid_unpaved" name="Avoid unpaved roads" description="Avoid unpaved roads" type="boolean"/>
		<parameter id="allow_private" name="Allow private access" description="Allow access to private areas" type="boolean"/>
		<parameter id="allow_via_ferrata" name="Allow via ferrata" description="Allow via ferrata paths" type="boolean"/>
		<parameter id="height_obstacles" name="Use elevation data" description="Use terrain elevation data provided by SRTM, ASTER and EU-DEM" type="boolean" default="true"/>
		<parameter id="relief_smoothness_factor_more_plains" group="relief_smoothness_factor" name="More plains" description="" type="boolean"/>
		<parameter id="relief_smoothness_factor_plains" group="relief_smoothness_factor" name="Plains" description="" type="boolean" default="true"/>
		<parameter id="relief_smoothness_factor_hills" group="relief_smoothness_factor" name="Hills" description="" type="boolean"/>
		<parameter id="prefer_hiking_routes" name="Prefer hiking routes" description="Prefer hiking routes" type="boolean"/>
		<parameter id="prefer_tactile_paving" name="Prefer tactile paving" description="Prefer tactile paving" type="boolean"/>

		<way attribute="area">
			<select value="1"  t="railway" v="platform"/>
			<select value="1"  t="public_transport" v="platform"/>
			<select value="0"/>
		</way>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="highway" v="proposed"/>
			<select value="-1" t="highway" v="construction"/>
			<select value="-1" t="construction" v="yes"/>

			<if param="avoid_motorway">
				<select value="-1" t="highway" v="motorway"/>
				<select value="-1" t="highway" v="motorway_link"/>
				<select value="-1" t="highway" v="trunk"/>
				<select value="-1" t="highway" v="trunk_link"/>
			</if>

			<if param="avoid_stairs">
				<select value="-1" t="highway" v="steps"/>
			</if>

			<if param="avoid_ferries">
				<select value="-1" t="route" v="ferry"/>
			</if>
			<select value="-1" t="foot" v="no"/>
			<select value="1"  t="foot" v="yes"/>
			<select value="1"  t="foot" v="permissive"/>
			<select value="1"  t="foot" v="designated"/>
			<select value="1"  t="foot" v="destination"/>
			<select value="1"  t="foot" v="official"/>
			<!-- <select value="-1"  t="foot" v="use_sidepath"/> Already done by an entity_convert when creating the map files -->

			<select value="-1" t="access" v="no"/>
			<if param="allow_private">
				<select value="1"  t="access" v="private"/>
			</if>
			<select value="-1" t="access" v="private"/>
			<select value="1"  t="access" v="yes"/>
			<select value="1"  t="access" v="permissive"/>

			<if param="allow_via_ferrata">
				<select value="1" t="highway" v="via_ferrata"/>
			</if>

			<select value="1" t="highway" v="motorway"/>
			<select value="1" t="highway" v="motorway_link"/>
			<select value="1" t="highway" v="trunk"/>
			<select value="1" t="highway" v="trunk_link"/>
			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="cycleway"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="path"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="1" t="highway" v="pedestrian"/>
			<select value="1" t="highway" v="footway"/>
			<select value="1" t="railway" v="platform"/>
			<select value="1" t="public_transport" v="platform"/>
			<select value="1" t="man_made" v="pier"/>
			<select value="1" t="highway" v="bridleway"/>
			<select value="1" t="highway" v="steps"/>
			<select value="1" t="highway" v="elevator"/>
			<select value="1" t="route" v="ferry"/>
			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="0" t="oneway:foot" v="no"/>
			<select value="1" t="oneway:foot" v="yes"/>
			<select value="1" t="foot:backward" v="no"/>
			<select value="-1" t="foot:forward" v="no"/>
			<select value="1" t="conveying" v="forward"/>
			<select value="-1" t="conveying" v="backward"/>
		</way>


		<way attribute="speed" type="speed">
			<!-- do not decrease speed for steps -->
			<!-- <select value="1" t="highway" v="steps"/> -->
			<!-- for other roads defaultSpeed is used -->
			<!-- Use same speed everywhere to allow user easier control speed -->
		</way>

		<way attribute="obstacle_srtm_alt_speed">
			<if param="height_obstacles">
				<select value="0" t="highway" v="via_ferrata"/>
				<gt value1="-100" value2=":incline">
					<select value="40"/>
				</gt>
				<gt value1="-60" value2=":incline">
					<select value="25"/>
				</gt>
				<gt value1="-35" value2=":incline">
					<select value="17"/>
				</gt>
				<gt value1="-17" value2=":incline">
					<select value="10"/>
				</gt>
				<gt value1="-9" value2=":incline">
					<select value="5"/>
				</gt>
				<if param="relief_smoothness_factor_more_plains">
					<gt value1="3" value2=":incline">
						<select value="2"/>
					</gt>
					<gt value1="7" value2=":incline">
						<select value="12"/>
					</gt>
					<gt value1="13" value2=":incline">
						<select value="30"/>
					</gt>
					<gt value1="25" value2=":incline">
						<select value="50"/>
					</gt>
					<select value="74"/>
				</if>
				<if param="relief_smoothness_factor_hills">
					<gt value1="1" value2=":incline">
						<select value="61"/>
					</gt>
					<gt value1="3" value2=":incline">
						<select value="20"/>
					</gt>
					<gt value1="7" value2=":incline">
						<select value="7"/>
					</gt>
					<gt value1="13" value2=":incline">
						<select value="3"/>
					</gt>
					<gt value1="25" value2=":incline">
						<select value="0.5"/>
					</gt>
					<select value="0.3"/>
				</if>
				<gt value1="3" value2=":incline">
					<select value="1"/>
				</gt>
				<gt value1="7" value2=":incline">
					<select value="4"/>
				</gt>
				<gt value1="13" value2=":incline">
					<select value="8"/>
				</gt>
				<gt value1="25" value2=":incline">
					<select value="10"/>
				</gt>
				<select value="15"/>
			</if>
		</way>

		<way attribute="priority">
			<!-- Additional tags -->
			<select value="0.05" t="foot" v="private"/>
			<select value="0.05" t="foot" v="destination"/>

			<!-- Q? access=destination should not be used foot or what is the proposed scheme
			http://www.openstreetmap.org/way/173188624#map=18/39.56805/2.64846
			should be 
			<select value="0.05" t="access" v="private"/>
			<select value="0.05" t="access" v="destination"/> -->
			<select value="1.1" t="foot" v="designated"/>
			<select value="1.2" t="sidewalk" v="yes"/>
			<select value="0.9" t="sidewalk" v="no"/>

			<if param="avoid_tunnels">
				<select value="0.02" t="tunnel" v="yes"/>
			</if>

			<!-- object tags -->
			<if param="prefer_tactile_paving">
				<select value="5" t="tactile_paving" v="yes"/>
			</if>
			<if param="prefer_hiking_routes">
				<select value="10" t="route_hiking"/>
			</if>
			<select value="0.7" t="highway" v="motorway"/>
			<select value="0.7" t="highway" v="motorway_link"/>
			<select value="0.7" t="highway" v="trunk"/>
			<select value="0.7" t="highway" v="trunk_link"/>
			<select value="0.8" t="highway" v="bridleway"/>
			<select value="0.9" t="highway" v="service"/>
			<select value="0.9" t="highway" v="primary"/>
			<select value="0.9" t="highway" v="primary_link"/>
			<select value="0.9" t="highway" v="secondary"/>
			<select value="0.9" t="highway" v="secondary_link"/>
			<select value="0.9" t="highway" v="tertiary"/>
			<select value="0.9" t="highway" v="tertiary_link"/>
			<select value="1"   t="route"   v="ferry"/>
			<select value="1.1" t="highway" v="residential"/>
			<if param="avoid_unpaved">
				<select value="0.4" t="tracktype" v="grade2"/>
				<select value="0.1" t="tracktype" v="grade3"/>
				<select value="0.1" t="tracktype" v="grade4"/>
				<select value="0.1" t="tracktype" v="grade5"/>
				<select value="0.1" t="surface" v="unpaved"/>
				<select value="0.4" t="surface" v="compacted"/>
				<select value="0.1" t="surface" v="dirt"/>
				<select value="0.1" t="surface" v="earth"/>
				<select value="0.1" t="surface" v="gravel"/>
				<select value="0.4" t="surface" v="fine_gravel"/>
				<select value="0.1" t="surface" v="grass"/>
				<select value="0.1" t="surface" v="ground"/>
				<select value="0.1" t="surface" v="mud"/>
				<select value="0.1" t="surface" v="pebblestone"/>
				<select value="0.1" t="surface" v="sand"/>
			</if>
			<select value="1.25" t="highway" v="elevator"/>
			<select value="1.2" t="highway" v="steps"/>
			<select value="1.2" t="highway" v="living_street"/>
			<select value="1.2" t="highway" v="pedestrian"/>
			<select value="1.2" t="highway" v="footway"/>
			<select value="1.2" t="highway" v="path"/>


			<select value="1"/>
		</way>

		<point attribute="obstacle_time">
			<select value="5" t="highway" v="traffic_signals"/>
			<select value="10" t="crossing" v="unmarked"/>
			<select value="5"  t="crossing" v="uncontrolled"/>
			<select value="30" t="crossing" v="traffic_signals"/>
			<select value="5" t="highway" v="crossing"/>
			<select value="5" t="ford" />
			<select value="5" t="railway" v="crossing" />
			<select value="5" t="railway" v="level_crossing"/>
		</point>

		<point attribute="obstacle">
			<select value="-1" t="foot" v="no"/>
			<select value="-1"  t="foot" v="private"/>
			<select value="120"  t="foot" v="destination"/>
			<select value="0"  t="foot" v="yes"/>
			<select value="0"  t="foot" v="permissive"/>
			<select value="0"  t="foot" v="designated"/>
			<select value="0"  t="foot" v="official"/>

			<select value="-1" t="access" v="no"/>
			<if param="allow_private">
				<select value="180"  t="access" v="private"/>
			</if>
			<select value="-1"  t="access" v="private"/>
			<select value="120"  t="access" v="destination"/>

			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>
			<select value="300" t="amenity" v="ferry_terminal"/>

		</point>

		<way attribute="penalty_transition">
			<if param="avoid_tunnels">
				<select value="200" t="tunnel" v="yes"/>
				<select value="150" t="tunnel" v="avalanche_protector"/>
			</if>
			<select value="0" t="route"   v="ferry"/>
			<select value="0" t="highway" v="steps"/>
			<select value="0" t="highway" v="elevator"/>
			<select value="0" t="highway" v="living_street"/>
			<select value="0" t="highway" v="pedestrian"/>
			<select value="0" t="highway" v="footway"/>
			<select value="0" t="highway" v="path"/>
			<select value="0" t="sidewalk" v="yes"/>
			<select value="0" t="sidewalk" v="both"/>
			<select value="0" t="foot" v="yes"/>
			<select value="0" t="foot" v="designated"/>
			<select value="0" t="highway" v="residential"/>
			<select value="0" t="public_transport" v="platform"/>
			<select value="0"  t="railway" v="platform"/>
			<!-- give highway penalty to use mostly footways if available-->
			<select value="90"/>
			
		</way>
	</routingProfile>

	<routingProfile name="horsebackriding" baseProfile="horsebackriding" restrictionsAware="true" minSpeed="2" defaultSpeed="6" maxSpeed="30" sharpTurn="0" slightTurn="0" followSpeedLimitations="false" onewayAware="false">

		<attribute name="heuristicCoefficient" value="1.2" />
		<!-- NEW ROUTING API -->
		<parameter id="avoid_ferries" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		
		<!-- Bundes / Landesstraßen vermeiden  -/- Avoid Highway /Expressway -->
		<parameter id="avoid_highway" name="Avoid highways" description="Avoid highways " type="boolean"/>
		<parameter id="avoid_tunnels" name="Avoid tunnels" description="Avoid tunnels" type="boolean"/>
		<parameter id="avoid_stairs" name="Avoid stairs" description="Avoid stairs" type="boolean"/>
		
		<parameter id="allow_private" name="Allow private access" description="Allow access to private areas" type="boolean"/>
		<parameter id="allow_gate" name="Allow gate usage" description="Allow usage of gates" type="boolean"/>
		
		<!-- Nur ausdrücklich erlaubte Wege nutzen  -/- Only use expressly permitted ways -->
		<parameter id="only_permitted_streets" name="Expressly permitted streets" description="Only use Streets which are expressly permitted" type="boolean"/>
		<parameter id="only_permitted_ways" name="Expressly permitted ways" description="Only use ways (tracks, paths aso.) which are expressly permitted" type="boolean"/>

		<parameter id="height_obstacles" name="Use elevation data" description="Use terrain elevation data provided by SRTM, ASTER and EU-DEM" type="boolean" default="true"/>
		<parameter id="carriage_restrictions" name="Carriage restrictions" description="Consider access permissions for horse-drawn vehicles" type="boolean"/>
		<parameter id="prefer_horse_routes" name="Prefer horse routes" description="Prefer horse routes" type="boolean"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="highway" v="proposed"/>
			<select value="-1" t="highway" v="construction"/>
			<select value="-1" t="construction" v="yes"/>
			<select value="-1" t="highway" v="motorway"/>
			<select value="-1" t="highway" v="motorway_link"/>
			<select value="-1" t="highway" v="trunk"/>
			<select value="-1" t="highway" v="trunk_link"/>
			<select value="-1" t="highway" v="elevator"/>
			<select value="-1" t="highway" v="cycleway"/>
			<select value="-1" t="railway" v="platform"/>
			<select value="-1" t="public_transport" v="platform"/>
			
			<if param="avoid_highway">
				<select value="-1" t="highway" v="primary"/>
				<select value="-1" t="highway" v="primary_link"/>
				<select value="-1" t="highway" v="secondary"/>
				<select value="-1" t="highway" v="secondary_link"/>
			</if>
			
			<if param="avoid_stairs">
				<select value="-1" t="highway" v="steps"/>
			</if>
			
			<if param="avoid_ferries">
				<select value="-1" t="route" v="ferry"/>
			</if>
			
			<select value="-1" t="horse_scale" v="impossible"/>
			
			<select value="-1" t="horse" v="no"/>
			<select value="-1" t="horse" v="critical"/>
			<select value="-1" t="horse" v="unsuitable"/>
			<select value="1"  t="horse" v="yes"/>
			<select value="1"  t="horse" v="permissive"/>
			<select value="1"  t="horse" v="designated"/>
			<select value="1"  t="horse" v="destination"/>
			<select value="1"  t="horse" v="official"/>
			<!-- <select value="-1"  t="horse" v="use_sidepath"/> Already done by an entity_convert when creating the map files -->
			
			<if param="carriage_restrictions">
				<select value="-1" t="carriage" v="no"/>
			</if>

			<if param="allow_private">
				<select value="1"  t="horse" v="private"/>
				<select value="1"  t="access" v="private"/>
			</if>
			<select value="-1"  t="horse" v="private"/>
			<select value="-1" t="access" v="private"/>
			<select value="-1" t="access" v="no"/>
			<select value="1"  t="access" v="yes"/>
			<select value="1"  t="access" v="permissive"/>
			
			<select value="1" t="highway" v="bridleway"/>
			
			<!-- If horse-access is not expressly defined as above: no access to other -->
			<ifnot param="only_permitted_streets">
				<!-- If not: "avoid_highway" -->
				<select value="1" t="highway" v="primary"/>
				<select value="1" t="highway" v="primary_link"/>
				<select value="1" t="highway" v="secondary"/>
				<select value="1" t="highway" v="secondary_link"/>
				<!-- Endif -->
				
				<select value="1" t="highway" v="tertiary"/>
				<select value="1" t="highway" v="tertiary_link"/>
				<select value="1" t="highway" v="residential"/>
				<select value="1" t="highway" v="living_street"/>
				<select value="1" t="highway" v="unclassified"/>
				<select value="1" t="highway" v="road"/>
				
				<!-- If you dismount, you can use them: -->
				<select value="1" t="highway" v="pedestrian"/>
				<select value="1" t="highway" v="footway"/>
				<select value="1" t="man_made" v="pier"/>
				
			</ifnot>
			
			<!-- If horse-access is not expressly defined as above: no access to other -->
			<ifnot param="only_permitted_ways">
				<select value="1" t="highway" v="service"/>
				<select value="1" t="highway" v="track"/>
				<select value="1" t="highway" v="path"/>
			</ifnot>
			
			<select value="1" t="highway" v="steps"/>
			<select value="1" t="route" v="ferry"/>

			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="1" t="oneway:horse" v="yes"/>
			<select value="0" t="oneway:horse" v="no"/>
			<select value="-1" t="oneway:horse" v="-1"/>
			<select value="1" t="oneway:vehicle" v="yes"/>
			<select value="0" t="oneway:vehicle" v="no"/>
			<select value="-1" t="oneway:vehicle" v="-1"/>
			<select value="1" t="horse:backward" v="no"/>
			<select value="-1" t="horse:forward" v="no"/>

			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
            <!-- Following line because junction=circular is converted to roundabout, but is not necessarily oneway=yes -->
		<select value="0" t="oneway" v="no"/>
			<select value="1" t="roundabout" v="yes"/>
			<select value="1" t="junction" v="roundabout"/>
		</way>


		<way attribute="speed" type="speed">
			<!-- Speed is not that important -->
			<!-- maybe: https://wiki.openstreetmap.org/wiki/Key:horse_scale 
			<select value="6" t="horse_scale" v="common"/>
			<select value="5" t="horse_scale" v="demanding"/>
			<select value="4.5" t="horse_scale" v="difficult"/>
			<select value="3" t="horse_scale" v="critical"/>
			<select value="1.5" t="horse_scale" v="dangerous"/>
			<select value="0" t="horse_scale" v="impossible"/>
			<select value="6"/>
			-->
		</way>

		<way attribute="obstacle_srtm_alt_speed">
			<if param="height_obstacles">
				<gt value1="-60" value2=":incline">
					<select value="25"/>
				</gt>
				<gt value1="-45" value2=":incline">
					<select value="15"/>
				</gt>
				<gt value1="-25" value2=":incline">
					<select value="10"/>
				</gt>
				<gt value1="-15" value2=":incline">
					<select value="5"/>
				</gt>
				<gt value1="-7.5" value2=":incline">
					<select value="2.5"/>
				</gt>
				<gt value1="-3" value2=":incline">
					<select value="1"/>
				</gt>
				<gt value1="3" value2=":incline">
					<select value="1"/>
				</gt>
				<gt value1="7.5" value2=":incline">
					<select value="5"/>
				</gt>
				<gt value1="15" value2=":incline">
					<select value="10"/>
				</gt>
				<gt value1="25" value2=":incline">
					<select value="15"/>
				</gt>
				<gt value1="45" value2=":incline">
					<select value="30"/>
				</gt>
				<select value="40"/>
			</if>
		</way>

		<way attribute="priority">
			<!-- Additional tags -->
			
			<select value="0.05" t="access" v="private"/>
			<select value="0.5" t="access" v="destination"/>
			<select value="0.05" t="horse" v="private"/>
			<select value="0.5" t="horse" v="destination"/>

			<if param="prefer_horse_routes">
				<select value="2.5" t="route_horse"/>
				<select value="2.5" t="route" v="horse"/>
			</if>

			<select value="1.5" t="horse" v="designated"/>
			<select value="1.5" t="horse" v="official"/>
			
			<if param="avoid_tunnels">
				<select value="0.02" t="tunnel" v="yes"/>
			</if>

			<!-- object tags -->
			
			<select value="0.3" t="highway" v="primary"/>
			<select value="0.3" t="highway" v="primary_link"/>
			<select value="0.5" t="highway" v="secondary"/>
			<select value="0.5" t="highway" v="secondary_link"/>
					
			<select value="0.7" t="highway" v="tertiary"/>
			<select value="0.7" t="highway" v="tertiary_link"/>
			<select value="0.7" t="highway" v="unclassified"/>
			
			<select value="0.8" t="highway" v="footway"/>
			<select value="0.8" t="highway" v="pedestrian"/>
			<select value="0.8" t="man_made" v="pier"/>
			
			<select value="0.9" t="highway" v="residential"/>
			<select value="0.9" t="highway" v="living_street"/>
			<select value="0.9" t="highway" v="service"/>
			
			<select value="1.5" t="highway" v="bridleway"/>
			
			<select value="0.9" t="route"   v="ferry"/>
			<select value="0.5" t="highway" v="steps"/>
			
			<select value="1"/>
		</way>

		<point attribute="obstacle_time">
			<select value="5" t="highway" v="traffic_signals"/>
			<select value="10" t="crossing" v="unmarked"/>
			<select value="5"  t="crossing" v="uncontrolled"/>
			<select value="30" t="crossing" v="traffic_signals"/>
			<select value="5" t="highway" v="crossing"/>
			<select value="5" t="ford" />
			<select value="5" t="railway" v="crossing" />
			<select value="5" t="railway" v="level_crossing"/>
		</point>

		<point attribute="obstacle">
			<select value="-1" t="horse" v="no"/>
			<select value="120"  t="horse" v="destination"/>
			<select value="0"  t="horse" v="yes"/>
			<select value="0"  t="horse" v="permissive"/>
			<select value="0"  t="horse" v="designated"/>
			<select value="0"  t="horse" v="official"/>

			<select value="-1" t="access" v="no"/>
			<if param="allow_private">
				<select value="180"  t="access" v="private"/>
				<select value="180"  t="horse" v="private"/>
			</if>
			<select value="-1"  t="horse" v="private"/>
			<select value="-1"  t="access" v="private"/>
			<select value="120"  t="access" v="destination"/>

			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>
			
			<ifnot param="allow_gate">
				<select value="-1"  t="barrier" v="gate"/>
				<select value="-1"  t="barrier" v="lift_gate"/>
			</ifnot>
			
			<select value="-1"  t="barrier" v="cycle_barrier"/>
			<select value="-1"  t="barrier" v="swing_gate"/>
			<select value="-1"  t="barrier" v="cattle_grid"/>
			<select value="-1"  t="barrier" v="full-height_turnstile"/>
			<select value="-1"  t="barrier" v="sliding_gate"/>
			<select value="-1"  t="barrier" v="kissing_gate"/>
			<select value="-1"  t="barrier" v="motorcycle_barrier"/>
			<select value="-1"  t="barrier" v="turnstile"/>
			<select value="15"  t="barrier" v="wicket_gate"/>
			<select value="15"  t="barrier" v="log"/>
			<select value="1"   t="barrier" v="height_restrictor"/>
			<select value="1"   t="barrier" v="coupure"/>
			
			<select value="15" t="barrier" v="bump_gate"/>
			<select value="5"  t="barrier"/>
		</point>

		<way attribute="penalty_transition">
			<if param="avoid_tunnels">
				<select value="200" t="tunnel" v="yes"/>
				<select value="150" t="tunnel" v="avalanche_protector"/>
			</if>
		</way>
	</routingProfile>
	
	<routingProfile name="geocoding" baseProfile="car" restrictionsAware="true" minSpeed="10.0" defaultSpeed="10.0" maxSpeed="10.0">
		<way attribute="access">
			<select value="1" t="highway" v="motorway"/>
			<select value="1" t="highway" v="motorway_link"/>
			<select value="1" t="highway" v="trunk"/>
			<select value="1" t="highway" v="trunk_link"/>
			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="1" t="highway" v="pedestrian"/>
			<select value="1" t="route" v="ferry"/>
			<select value="1" t="route" v="shuttle_train"/>
			<select value="1" t="highway" v="via_ferrata"/>
			<select value="-1"/>
		</way>
	</routingProfile>

	<routingProfile name="boat" restrictionsAware="true" minSpeed="3.0" defaultSpeed="5.0" maxSpeed="66.7" onewayAware="true" baseProfile="boat">
		<parameter id="height" name="Height" description="Maximum vehicle height to be permitted on the route" type="numeric" values="0,1.49,1.99,2.49,2.99,3.49,3.99,4.49,4.99,5.49,5.99,6.49,6.99,7.49,7.99,8.49,8.99,9.49,9.99,10.99,11.99,12.99,13.99,14.99,15.99,16.99,17.99,18.99,19.99,20.99,21.99,22.99,23.99,24.99,25.99,26.99,27.99,28.99,29.99" valueDescriptions="-,1.5m,2m,2.5m,3m,3.5m,4m,4.5m,5m,5.5m,6m,6.5m,7m,7.5m,8m,8.5m,9m,9.5m,10m,11m,12m,13m,14m,15m,16m,17m,18m,19m,20m,21m,22m,23m,24m,25m,26m,27m,28m,29m,30m"/>
		<parameter id="width" name="Width" description="Maximum vehicle width to be permitted on the route" type="numeric" values="0,1.49,1.99,2.49,2.99,3.49,3.99,4.49,4.99,5.49,5.99,6.49,6.99,7.49,7.99,8.49,8.99,9.49,9.99,10.99,11.99,12.99,13.99,14.99" valueDescriptions="-,1.5m,2m,2.5m,3m,3.5m,4m,4.5m,5m,5.5m,6m,6.5m,7m,7.5m,8m,8.5m,9m,9.5m,10m,11m,12m,13m,14m,15m"/>
		<parameter id="allow_streams" name="Allow streams" description="Allow streams and drains" type="boolean"/>
		<parameter id="allow_intermittent" name="Allow intermittent" description="Allow intermittent water ways" type="boolean"/>
		<parameter id="allow_ferries" name="Allow ferries" description="Allow ferries" type="boolean"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="access" v="no"/>
			<select value="1"  t="access" v="yes"/>
			<select value="-1" t="access" v="private"/>
			<select value="1" t="boat" v="yes"/>
			<select value="1" t="lock" v="yes"/>
			<select value="-1" t="tunnel" v="culvert"/>

			<if param="allow_intermittent">
				<select value="1" t="intermittent" v="yes"/>
			</if>
			<if param="allow_ferries">
				<select value="1" t="route" v="ferry"/>
			</if>
			<select value="-1" t="intermittent" v="yes"/>
			<select value="1" t="intermittent" v="no"/>
			<select value="-1" t="waterway" v="dam"/>
			<select value="-1" t="waterway" v="weir"/>
			<select value="-1" t="waterway" v="waterfall"/>
			<select value="1"  t="access" v="permissive"/>
			<select value="1"  t="access" v="destination"/>
			<select value="-1" t="seamark:bridge:clearance_height_open">
				<gt value1=":height" value2="$seamark:bridge:clearance_height_open" type="length"/>
			</select>
			<select value="-1" t="seamark:bridge:clearance_height">
				<gt value1=":height" value2="$seamark:bridge:clearance_height" type="length"/>
			</select>
			<select value="-1" t="seamark:bridge:clearance_width">
				<gt value1=":width" value2="$seamark:bridge:clearance_width" type="length"/>
			</select>
			<select value="1"  t="waterway" v="river"/>
			<if param="allow_streams">
				<select value="1" t="waterway" v="stream"/>
				<select value="1" t="waterway" v="drain"/>
			</if>
			<select value="1"  t="waterway" v="canal"/>
			<select value="1"  t="waterway" v="tidal_channel"/>
			<select value="1"  t="waterway" v="fairway"/>
			<select value="1" t="waterway" v="boat_lift"/>
			
			<!-- disable polygon routing to avoid intersection with waterway=fairway -->
			<!-- <select value="1"  t="seamark:type" v="fairway"/>  -->

			<select value="-1"/>
		</way>

		<way attribute="area">
			<select value="1"  t="seamark:type" v="fairway"/>
			<select value="0"/>
		</way>

		<way attribute="oneway">
			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
		</way>

		<way attribute="speed" type="speed">
			<!-- Use same speed everywhere to allow user easier control speed -->
		</way>

		<way attribute="priority">
			<select value="2"  t="waterway" v="fairway"/>
			<select value="1.3"  t="waterway" v="river"/>
			<if param="allow_intermittent">
				<select value="0.5" t="intermittent" v="yes"/>
			</if>
			<if param="allow_streams">
				<select value="1" t="waterway" v="stream"/>
				<select value="0.5" t="waterway" v="drain"/>
			</if>
			<if param="allow_ferries">
				<select value="1" t="route" v="ferry"/>
			</if>
			<select value="1.3"  t="waterway" v="canal"/>
			<select value="0.7"/>
		</way>

		<point attribute="obstacle">
			<select value="-1" t="access" v="no"/>
			<select value="-1"  t="access" v="private"/>
			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>
			<select value="0"  t="access" v="customers"/>
			<select value="-1" t="waterway" v="dam"/>
			<select value="-1" t="waterway" v="weir"/>
			<select value="-1" t="waterway" v="waterfall"/>
			<select value="-1" t="seamark:bridge:clearance_height_open">
				<gt value1=":height" value2="$seamark:bridge:clearance_height_open" type="length"/>
			</select>
			<select value="-1" t="seamark:bridge:clearance_height">
				<gt value1=":height" value2="$seamark:bridge:clearance_height" type="length"/>
			</select>
			<select value="-1" t="seamark:bridge:clearance_width">
				<gt value1=":width" value2="$seamark:bridge:clearance_width" type="length"/>
			</select>
			<select value="450" t="waterway" v="lock_gate"/>
		</point>
		<point attribute="obstacle_time">
			<select value="450" t="waterway" v="lock_gate"/>
		</point>

	</routingProfile>

	<routingProfile name="ski" minSpeed="3.0" defaultSpeed="5.0" maxSpeed="150.0" onewayAware="true" baseProfile="ski">
		<attribute name="penaltyForReverseDirection" value="900" /> <!-- ski: ~ 15 minutes to take a lift -->

		<parameter id="piste_type_downhill" name="Alpine/downhill ski" description="Slopes for alpine or downhill skiing and access to ski lifts." type="boolean" default="true"/>
		<parameter id="piste_type_nordic" name="Cross country/nordic ski" description="Trails for nordic or cross-country skiing." type="boolean" default="true"/>
		<parameter id="piste_type_skitour" name="Ski touring" description="Routes for ski touring." type="boolean" default="true"/>
		<parameter id="piste_type_sled" name="Sled" description="Slopes for sled usage." type="boolean"/>

		<parameter id="allow_intermediate" name="Allow intermediate routes" description="More difficult routes with steeper sections. Generally some obstacles that should be avoided." type="boolean" default="true"/>
		<parameter id="allow_advanced" name="Allow advanced routes" description="Difficult routes, with dangerous obstacles and steep sections." type="boolean" default="false"/>
		<parameter id="allow_expert" name="Allow expert routes" description="Extremely difficult routes, with dangerous obstacles and surroundings." type="boolean" default="false"/>

		<parameter id="allow_skating_only" name="Allow skating only routes" description="Routes groomed for free style or skating only without classic trails." type="boolean" default="true"/>
		<parameter id="allow_classic_only" name="Allow classic only routes" description="Routes groomed for classic style only without skating trails. This includes routes groomed by a smaller snowmobile with looser piste and tracks made manually by skiers." type="boolean" default="true"/>

		<parameter id="difficulty_preference" name="Prefered difficulty" description="Prefer routes of this difficulty, although routing over harder or easier pistes is still possible if shorter." type="numeric" values="0,1,2,3,4" valueDescriptions="No preference,Beginner,Intermediate,Advanced,Expert" default="1"/>

		<parameter id="freeride_policy" name="Off-piste" description="Freerides and offpiste are unofficial routes and passages. Typically ungroomed, unmainted by the officials and not checked in the evening. Enter at own risk." type="numeric" values="0,1,2,3" valueDescriptions="Do not go offpiste,Only if necessary,Allow,Prefer offpiste" default="0"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="access" v="no"/>
			<select value="-1" t="access" v="private"/>

			<select value="1" t="piste:type" v="connection"/>
			<select value="1" t="piste:type" v="hike"/>

			<!-- Beginner and novice routes are always allowed, the others have a settings param: -->
			<ifnot param="allow_intermediate">
				<select value="-1" t="piste:difficulty" v="intermediate"/>
			</ifnot>
			<ifnot param="allow_advanced">
				<select value="-1" t="piste:difficulty" v="advanced"/>
			</ifnot>
			<ifnot param="allow_expert">
				<select value="-1" t="piste:difficulty" v="expert"/>
			</ifnot>

			<gt value1="0" value2=":freeride_policy">
				<select value="-1" t="piste:difficulty" v="freeride"/>
			</gt>

			<if param="piste_type_downhill">
				<!-- Allow any aerialway -->
				<select value="1" t="aerialway"/>

				<select value="1" t="piste:type" v="downhill"/>
			</if>

			<ifnot param="allow_classic_only">
				<select value="-1" t="piste:grooming" v="classic"/>
				<select value="-1" t="piste:grooming" v="scooter"/>
				<select value="-1" t="piste:grooming" v="backcountry"/>
			</ifnot>
			<ifnot param="allow_skating_only">
				<select value="-1" t="piste:grooming" v="skating"/>
			</ifnot>
			<if param="piste_type_nordic">
				<select value="1" t="piste:type" v="nordic"/>
			</if>
			<if param="piste_type_skitour">
				<select value="1" t="piste:type" v="skitour"/>
			</if>
			<if param="piste_type_sled">
				<select value="1" t="piste:type" v="sled"/>
			</if>
			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="1" t="piste:oneway" v="yes"/>
			<select value="0" t="piste:oneway" v="no"/>
			<select value="1" t="oneway" v="yes"/>
			<select value="0" t="oneway" v="no"/>
			<select value="-1" t="oneway" v="-1"/>

			<select value="0" t="piste:type" v="connection"/>
			<select value="0" t="piste:type" v="hike"/>
			<select value="0" t="piste:type" v="nordic"/>
			<select value="0" t="piste:type" v="skitour"/>

			<select value="1"/>
		</way>

		<way attribute="speed" type="speed">
			<select value="3" t="piste:type" v="hike"/>
			<select value="3" t="piste:type" v="connection"/>
			<select value="7" t="piste:type" v="nordic"/>
			<select value="7" t="piste:type" v="skitour"/>
			<select value="10" t="piste:type" v="sled"/>

			<select value="1" t="aerialway" v="magic_carpet"/>
			<select value="1" t="aerialway" v="rope-tow"/>
			<select value="5" t="aerialway" v="platter"/>
			<select value="5" t="aerialway" v="j-bar"/>
			<select value="5" t="aerialway" v="t-bar"/>
			<select value="15" t="aerialway" v="mixed_lift"/>
			<select value="15" t="aerialway" v="chair_lift"/>
			<select value="15" t="aerialway" v="drag_lift"/>
			<select value="25" t="aerialway" v="cable_car"/>
			<select value="25" t="aerialway" v="gondola"/>

			<!-- It's difficult to go fast on a novice slope. Lots of new skiers, no steepness at all... -->
			<select value="15" t="piste:difficulty" v="novice"/>

			<select value="30"/>
		</way>

		<way attribute="priority">
			<select value="1" t="piste:type" v="connection"/>
			<select value="1" t="aerialway"/>

			<gt value1=":freeride_policy" value2="3">
				<select t="piste:difficulty" v="freeride" value="2"/> <!-- High priority -->
			</gt>

			<gt value1=":freeride_policy" value2="2">
				<select t="piste:difficulty" v="freeride" value="1"/> <!-- No special priority -->
			</gt>

			<gt value1=":freeride_policy" value2="1">
				<select t="piste:difficulty" v="freeride" value="0.5"/> <!-- Only if necessary -->
			</gt>

			<select t="piste:difficulty" v="novice" value="0.5"/>  <!-- Never prefer novice routes - there are novices on them! -->

			<gt value1=":difficulty_preference" value2="4">
				<!-- Prefer expert -->
				<select t="piste:difficulty" v="expert" value="1.8"/>
				<select t="piste:difficulty" v="advanced" value="1.5"/>
				<select t="piste:difficulty" v="intermediate" value="1.2"/>
				<select t="piste:difficulty" v="beginner" value="1"/>
			</gt>

			<gt value1=":difficulty_preference" value2="3">
				<!-- Prefer advanced -->
				<select t="piste:difficulty" v="expert" value="1.2"/>
				<select t="piste:difficulty" v="advanced" value="1.8"/>
				<select t="piste:difficulty" v="intermediate" value="1.5"/>
				<select t="piste:difficulty" v="beginner" value="1.2"/>
			</gt>

			<gt value1=":difficulty_preference" value2="2">
				<!-- Prefer intermediate -->
				<select t="piste:difficulty" v="expert" value="1"/>
				<select t="piste:difficulty" v="advanced" value="1.2"/>
				<select t="piste:difficulty" v="intermediate" value="1.8"/>
				<select t="piste:difficulty" v="beginner" value="1.5"/>
			</gt>

			<gt value1=":difficulty_preference" value2="1">
				<!-- Prefer beginner -->
				<select t="piste:difficulty" v="expert" value="0.5"/>
				<select t="piste:difficulty" v="advanced" value="1"/>
				<select t="piste:difficulty" v="intermediate" value="1.2"/>
				<select t="piste:difficulty" v="beginner" value="1.8"/>
			</gt>

			<!-- :difficulty_preference == 0 means no special preference-->

			<select value="1"/>
		</way>

		<point attribute="obstacle">
			<select value="-1" t="access" v="no"/>
			<select value="-1"  t="access" v="private"/>
			<select value="0"  t="access" v="yes"/>
			<select value="0"  t="access" v="permissive"/>
			<select value="0"  t="access" v="customers"/>
			<select value="120"  t="aerialway" v="station"/>
		</point>

		<point attribute="obstacle_time">
			<select value="120"  t="aerialway" v="station"/>
		</point>

	</routingProfile>

	<!-- max default speed is max speed for any transport, min speed is pedestrian speed -->
	<routingProfile name="public_transport" minDefaultSpeed="4.0" maxDefaultSpeed="95.0" baseProfile="public_transport">
		<!-- maximum distance to walk to find start / end public transport stop -->
		<attribute name="walkRadius" value = "3000" />
		<!-- maximum distance to walk to find transport stop to change transport -->
		<attribute name="walkChangeRadius" value = "500" />
		<!-- Max route time is 1.5 hour for 30 km direct, then limit is set with (hardcoded) 30 km/h  -->
		<attribute name="maxRouteTime" value = "5400" />
		<attribute name="maxRouteDistance" value = "30000" />
		<attribute name="maxRouteIncreaseSpeed" value = "30" />

		<!-- find alternatives routes within N seconds delay to the fastest route, 15 minutes (16% 1hour) -->
		<attribute name="delayForAlternativesRoutes" value = "900" />
		<!-- default value for max number of changes (deprecated as parameter used) -->
		<attribute name="maxNumberOfChanges" value = "3" />
	

		<parameter id="max_num_changes" name="Number of changes" description="Specify max number of changes" type="numeric" values="0,1,2,3,4" valueDescriptions="0,1,2,3,4" default="2"/>
		<parameter id="avoid_train" name="Avoid trains" description="Avoid trains" type="boolean"/>
		<parameter id="avoid_subway" name="Avoid subways" description="Avoid subways and monorails" type="boolean"/>
		<parameter id="avoid_ferry" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		<parameter id="avoid_tram" name="Avoid trams" description="Avoid trams" type="boolean"/>
		<parameter id="avoid_bus" name="Avoid buses" description="Avoid buses, trolleybuses" type="boolean"/>
		<parameter id="avoid_share_taxi" name="Avoid share taxis" description="Avoid share taxis" type="boolean"/>


		<point attribute="obstacle">
			<select value="60" t="time" v="stop"/>
			<select value="150" t="time" v="change"/>
			<select value="150" t="time" v="boarding"/>
		</point>

		<way attribute="speed" type="speed">
			<if param="avoid_train">
			    <select value="0" t="route" v="train"/>
			</if>
			<select value="80"  t="route" v="train"/>
		 
			<!-- Subway or similar --> 
			<if param="avoid_subway">
			    <select value="0" t="route" v="subway"/>
			</if>
			<select value="50"  t="route" v="subway"/>
		
			<if param="avoid_subway">
			    <select value="0" t="route" v="monorail"/>
			</if>
			<select value="50"  t="route" v="monorail"/>

			<if param="avoid_subway">
		 	    <select value="0" t="route" v="light_rail"/>
			</if>
			<select value="50"  t="route" v="light_rail"/>

			<if param="avoid_subway">
			    <select value="0" t="route" v="funicular"/>
			</if>
			<select value="50"  t="route" v="funicular"/>
		
			<!-- Tram, bus, trolleybus, share-taxi -->
			<if param="avoid_tram">
			    <select value="0" t="route" v="tram"/>
			</if>
			<select value="40"  t="route" v="tram"/>
		
			<if param="avoid_bus">
			    <select value="0" t="route" v="bus"/>
			</if>
			<select value="$maxspeed"  t="route" v="bus"/>

			<if param="avoid_bus">
			    <select value="0" t="route" v="trolleybus"/>
			</if>
			<select value="30"  t="route" v="trolleybus"/>

			<if param="avoid_share_taxi">
			    <select value="0" t="route" v="share_taxi"/>
			</if>
			<select value="40"  t="route" v="share_taxi"/>

			<select value="30"  t="route" v="aerialway"/>
			<!-- Ferry -->
			<if param="avoid_ferry">
			    <select value="0" t="route" v="ferry"/>
			</if>
			<select value="30"  t="route" v="ferry"/>
			<select value="4"  t="route" v="walk"/>
		</way>
	</routingProfile>

	<routingProfile name="moped" baseProfile="moped" restrictionsAware="true" minSpeed="5.0" defaultSpeed="25.0" maxSpeed="35.0" sharpTurn="6" slightTurn="6" onewayAware="true">
		<parameter id="avoid_ferries" name="Avoid ferries" description="Avoid ferries" type="boolean"/>
		<parameter id="avoid_unpaved" name="Avoid unpaved roads" description="Avoid unpaved roads" type="boolean"/>
		<parameter id="allow_private" name="Allow private access" description="Allow access to private areas" type="boolean"/>

		<!-- Turn penalties for short_way=yes -->
		<attribute name="shortWaySharpTurn" value = "0"/>
		<attribute name="shortWaySlightTurn" value = "0"/>

		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="-1" t="highway" v="proposed"/>
			<select value="-1" t="highway" v="construction"/>
			<select value="-1" t="construction" v="yes"/>

			<if param="avoid_ferries">
				<select value="-1" t="route" v="ferry"/>
				<select value="-1" t="route" v="boat"/>
			</if>

			<!-- Tag: moped, values in order of usage according to taginfo -->
			<select value="1" t="moped" v="designated"/>
			<select value="1" t="moped" v="yes"/>
			<select value="1" t="moped" v="permissive"/>
			<select value="1" t="moped" v="destination"/>
			<select value="1" t="moped" v="dismount"/>
			<select value="-1" t="moped" v="no"/>
			<!-- <select value="-1" t="moped" v="use_sidepath"/> Already done by an entity_convert when creating the map files -->

			<!-- Don't allow mopeds on steps or elevators, unless excplicly tagged and caught by rules above -->
			<select value="-1" t="highway" v="steps"/>
			<select value="-1" t="highway" v="elevator"/>

			<!-- Tag: access, values in order of usage according to taginfo -->
			<ifnot param="allow_private">
				<select value="-1" t="access" v="private"/>
			</ifnot>
			<select value="-1" t="access" v="no"/>

			<!-- Assume mopeds are not allowed on motorways, trunks and motorroads -->
			<select value="-1" t="highway" v="motorway"/>
			<select value="-1" t="highway" v="motorway_link"/>
			<select value="-1" t="highway" v="trunk"/>
			<select value="-1" t="highway" v="trunk_link"/>
			<select value="-1" t="motorroad" v="yes"/>

			<!-- General rules -->
			<select value="-1" t="vehicle" v="no"/>
			<select value="-1" t="vehicle" v="agricultural"/>
			<select value="-1" t="vehicle" v="forestry"/>
			<select value="-1" t="motor_vehicle" v="no"/>
			<select value="-1" t="motor_vehicle" v="agricultural"/>
			<select value="-1" t="motor_vehicle" v="forestry"/>
			<select value="1" t="highway" v="primary"/>
			<select value="1" t="highway" v="primary_link"/>
			<select value="1" t="highway" v="secondary"/>
			<select value="1" t="highway" v="secondary_link"/>
			<select value="1" t="highway" v="tertiary"/>
			<select value="1" t="highway" v="tertiary_link"/>
			<select value="1" t="highway" v="road"/>
			<select value="1" t="highway" v="residential"/>
			<select value="1" t="highway" v="unclassified"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="track"/>
			<select value="1" t="highway" v="path"/>
			<select value="1" t="highway" v="footway"/>
			<select value="1" t="highway" v="living_street"/>
			<select value="-1" t="highway" v="pedestrian"/>
			<select value="1" t="highway" v="byway"/>
			<select value="1" t="public_transport" v="platform"/>
			<select value="1" t="man_made" v="pier"/>

			<select value="-1" t="highway" v="cycleway"/>

			<ifnot param="avoid_ferries"><!-- ifnot is not strictly necessary, but it makes the intent more explicit -->
				<select value="1" t="route" v="ferry"/>
				<select value="1" t="route" v="boat"/>
			</ifnot>

			<!-- Default -->
			<select value="-1"/>
		</way>

		<way attribute="speed" type="speed">
			<select value="$maxspeed:moped" t="maxspeed:moped"/>
			<select value="$maxspeed:practical" t="maxspeed:practical"/>
			<select value="$maxspeed:advisory" t="maxspeed:advisory"/>
			<select value="$maxspeed" t="maxspeed"/>

			<select value="6" t="highway" v="footway"/>
			<select value="6" t="moped" v="dismount"/>
			<select value="6" t="bicycle" v="dismount"/><!-- Assume that if cyclist are required to dismount, moped drivers are too -->
		</way>

		<way attribute="priority">
			<if param="avoid_unpaved">
				<select value="0.4" t="tracktype" v="grade2"/>
				<select value="0.1" t="tracktype" v="grade3"/>
				<select value="0.1" t="tracktype" v="grade4"/>
				<select value="0.1" t="tracktype" v="grade5"/>
				<select value="0.1" t="surface" v="unpaved"/>
				<select value="0.4" t="surface" v="compacted"/>
				<select value="0.1" t="surface" v="dirt"/>
				<select value="0.1" t="surface" v="earth"/>
				<select value="0.1" t="surface" v="gravel"/>
				<select value="0.4" t="surface" v="fine_gravel"/>
				<select value="0.1" t="surface" v="grass"/>
				<select value="0.1" t="surface" v="ground"/>
				<select value="0.1" t="surface" v="mud"/>
				<select value="0.1" t="surface" v="pebblestone"/>
				<select value="0.1" t="surface" v="sand"/>
				<select value="0.3" t="highway" v="track"/>
				<select value="0.1" t="highway" v="path"/>
			</if>
			<select value="1" t="smoothness" v="excellent"/>
			<select value="1" t="smoothness" v="good"/>
			<select value="0.5" t="smoothness" v="intermediate"/>
			<select value="0.3" t="smoothness" v="bad"/>
			<select value="0.2" t="smoothness" v="very_bad"/>
			<select value="0.15" t="smoothness" v="horrible"/>
			<select value="0.1" t="smoothness" v="very_horrible"/>
			<select value="0.05" t="smoothness" v="impassable"/>
			<select value="0.8" t="tracktype" v="grade2"/>
			<select value="0.4" t="tracktype" v="grade3"/>
			<select value="0.2" t="tracktype" v="grade4"/>
			<select value="0.1" t="tracktype" v="grade5"/>
			<select value="0.4" t="surface" v="unpaved"/>
			<select value="0.7" t="surface" v="compacted"/>
			<select value="0.1" t="surface" v="dirt"/>
			<select value="0.3" t="surface" v="earth"/>
			<select value="0.1" t="surface" v="gravel"/>
			<select value="0.4" t="surface" v="fine_gravel"/>
			<select value="0.2" t="surface" v="grass"/>
			<select value="0.3" t="surface" v="ground"/>
			<select value="0.5" t="surface" v="mud"/>
			<select value="0.4" t="surface" v="pebblestone"/>
			<select value="0.2" t="surface" v="sand"/>
			<select value="1.1" t="surface" v="asphalt"/>
			<select value="1" t="surface" v="chipseal"/>
			<select value="0.9" t="surface" v="paved"/>
			<select value="1" t="surface" v="concrete"/>
			<select value="1" t="surface" v="paving_stones"/>

			<select value="0.45" t="highway" v="primary"/>
			<select value="0.4" t="highway" v="primary_link"/>
			<select value="0.5" t="highway" v="secondary"/>
			<select value="0.4" t="highway" v="secondary_link"/>
			<select value="1.2" t="highway" v="tertiary"/>
			<select value="1.1" t="highway" v="tertiary_link"/>
			<select value="1.4" t="highway" v="unclassified"/>
			<select value="1.3" t="highway" v="road"/>
			<select value="1.3" t="highway" v="residential"/>
			<select value="1" t="highway" v="service"/>
			<select value="1" t="highway" v="living_street"/>

			<select value="0.5" t="highway" v="track"/>
			<select value="0.2" t="highway" v="path"/>

		</way>

		<way attribute="oneway">
			<select value="0" t="oneway:moped" v="no"/>
			<select value="1" t="oneway:moped" v="yes"/>
			<select value="-1" t="oneway:moped" v="-1"/>

			<!-- Assume oneway is the same for bicycles and mopeds -->
			<select value="0" t="oneway:bicycle" v="no"/>
			<select value="1" t="oneway:bicycle" v="yes"/>
			<select value="-1" t="oneway:bicycle" v="-1"/>

			<select value="-1" t="moped:forward" v="no"/>
			<select value="-1" t="moped:forward" v="use_sidepath"/>

			<select value="1" t="oneway:vehicle" v="yes"/>
			<select value="0" t="oneway:vehicle" v="no"/>
			<select value="-1" t="oneway:vehicle" v="-1"/>
			<select value="1" t="motor_vehicle:backward" v="no"/>
			<select value="-1" t="motor_vehicle:forward" v="no"/>
			<select value="1" t="vehicle:backward" v="no"/>
			<select value="-1" t="vehicle:forward" v="no"/>
			<select value="1" t="moped:backward" v="no"/>
			<select value="-1" t="moped:forward" v="no"/>

			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
			<!-- Following line because junction=circular is converted to roundabout, but is not necessarily oneway=yes -->
			<select value="0" t="oneway" v="no"/>
			<select value="1" t="roundabout" v="yes"/>
			<select value="1" t="junction" v="roundabout"/>
		</way>

		<point attribute="obstacle_time">
			<select value="5"  t="barrier" v="entrance"/>
			<select value="15" t="barrier" v="gate"/>
			<select value="15" t="barrier" v="lift_gate"/>
			<select value="30" t="barrier" v="swing_gate"/>
			<select value="180" t="barrier" v="toll_booth"/>
			<select value="25" t="barrier"/>
			<select value="10" t="traffic_calming"/>
			<select value="20" t="highway" v="traffic_signals"/>
			<select value="1"  t="crossing" v="unmarked"/>
			<select value="5"  t="crossing" v="uncontrolled"/>
			<select value="15" t="highway" v="crossing"/>
			<select value="15" t="highway" v="stop"/>
			<select value="10" t="highway" v="give_way"/>
			<if param="avoid_unpaved">
				<select value="200" t="ford"/>
			</if>
			<select value="25" t="ford"/>

			<select value="25" t="railway" v="crossing"/>
			<select value="25" t="railway" v="level_crossing"/>
		</point>

		<point attribute="obstacle">
			<select value="-1" t="moped" v="no"/>
			<select value="0" t="moped" v="yes"/>
			<select value="0" t="moped" v="permissive"/>
			<select value="0" t="moped" v="designated"/>
			<select value="0" t="moped" v="official"/>

			<select value="-1" t="vehicle" v="no"/>
			<select value="0" t="vehicle" v="agricultural"/>
			<select value="0" t="vehicle" v="forestry"/>
			<select value="0" t="vehicle" v="yes"/>
			<select value="0" t="vehicle" v="permissive"/>
			<select value="0" t="vehicle" v="designated"/>

			<select value="-1" t="access" v="no"/>
			<select value="0" t="access" v="agricultural"/>
			<select value="0" t="access" v="forestry"/>
			<select value="0" t="access" v="yes"/>
			<select value="0" t="access" v="permissive"/>
			<if param="allow_private">
				<select value="180"  t="access" v="private"/>
			</if>
			<select value="-1" t="access" v="private"/>

			<select value="30" t="barrier" v="chain"/>
			<select value="40" t="barrier" v="debris"/>
			<select value="10" t="barrier" v="jersey_barrier"/>
			<select value="10" t="barrier" v="block"/>
			<select value="-1" t="barrier" v="turnstile"/>
			<select value="1" t="barrier" v="bus_trap"/>
			<select value="1" t="barrier" v="sump_buster"/>

			<select value="300" t="barrier" v="border_control"/>
			<select value="300" t="barrier" v="bump_gate"/>
			<select value="300" t="barrier" v="gate" />
			<select value="1"   t="barrier" v="entrance"/>
			<select value="1"   t="barrier" v="toll_booth"/>
			<select value="300" t="barrier" v="lift_gate"/>
			<select value="300" t="barrier" v="swing_gate"/>
			<select value="1" t="barrier" v="height_restrictor"/>
			<select value="1" t="barrier" v="coupure"/>
			<select value="10" t="traffic_calming"/>

			<select value="5"  t="highway" v="give_way"/>
			<select value="15"  t="highway" v="stop"/>
			<select value="15" t="highway" v="traffic_signals"/>
			<select value="300" t="amenity" v="ferry_terminal"/>
		</point>

	</routingProfile>

	<routingProfile name="train" baseProfile="train" restrictionsAware="true" minSpeed="30.0" defaultSpeed="70.0" maxSpeed="170" onewayAware="true" >
		<way attribute="access">
			<select value="-1" t="osmand_change" v="delete"/>
			<select value="1" t="railway" v="rail"/>
			<select value="1" t="railway" v="narrow_gauge"/>
			<select value="1" t="railway" v="subway"/>
			<select value="-1"/>
		</way>

		<way attribute="oneway">
			<select value="1" t="oneway" v="yes"/>
			<select value="1" t="oneway" v="1"/>
			<select value="-1" t="oneway" v="-1"/>
		</way>

		<way attribute="speed" type="speed">
		</way>

		<way attribute="priority">
		</way>

		<point attribute="obstacle">
			<select value="-1" t="access" v="no"/>
		</point>

		<point attribute="obstacle_time">
		</point>
	</routingProfile>

</osmand_routing_config>