Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

102 lines (85 sloc) 4.029 kb

Paparazzi 4.0

Changes since old_master tag

General

  • Settings for the telemetry modes are automatically generated from the XML file #118
  • Documentation node for modules #182
  • Automatic conversion of units in airframe file, settings and messages. See http://paparazzi.enac.fr/wiki/Units
  • Fix rc_settings: this enables you to change some settings in flight directly from the RC, is useful if you are alone or don't have a GCS.
  • Prefer compiler found in PATH over /opt/paparazzi/arm-multilib #231
  • Usability improvements for calibration scripts and added 3D view of magnetometer data with fitted ellipsoid

New hardware support

Airborne

  • All control gains are now positive #127
  • RC input follows sign conventions #124
  • A modification of the transport layer (pprz and xbee) in order to allow to select the device at the message level.
  • New modules:
  • Subsystem for new ahrs estimation algorithms: float_cmpl_rmat
  • Improvements for AHRS int_cmpl_quat and float_cmpl_rmat
    • Correction of centrifugal acceleration
    • Proper handling of BODY_TO_IMU rotations
  • All status LEDs configurable (with sensible defaults for the boards): SYS_TIME_LED, AHRS_ALIGNER_LED, BARO_LED, GPS_LED, RADIO_CONTROL_LED
  • Possibility to use two 2-way switches for the mode instead of one 3-way switch
  • GPS NMEA parser usable for basic position and fix #120

Rotorcraft firmware specific

  • Stabilization/supervision commands with standard PPRZ range #169
  • Additional motor arming options #174
  • Replaced INV_M with NOMINAL_HOVER_THROTTLE (in %) To use a fixed value instead of the adaptive vertical filter #177
  • Some fixes when changing vertical guidance modes
  • Same behaviour (gains) for AP_MODE_HOVER and NAV when holding position #82

Fixedwing firmware specific

  • Using a gyro (with IR sensors) is done via imu subsystem now as well

Simulator

  • JSBSim interface updated for new FGAccelerations class
  • FlightGear interface defaults to version 2.6, define FG_2_4 for 2.4
  • NPS simulator #205
    • has it's own nps target (instead of sim)
    • fdm type renamed from nps to jsbsim
    • waypoint altitude fixed
    • Improved ground interaction for JSBSim, can now initialize on ground #222
    • Radio control via joystick now uses SDL (so works on OSX as well) #232

STM32 architecture

  • Luftboot USB bootloader
  • Updated ADC defines for lisa/m You should now be able to use ADC_1, ADC_2, ADC_3 for the ADCs on the ANALOG1 #159
  • Enable second spektrum receiver via <configure name="USE_SECONDARY_SPEKTRUM_RECEIVER" value="1"/>
  • Enable new I2C driver via <configure name="USE_NEW_I2C_DRIVER"/>
Jump to Line
Something went wrong with that request. Please try again.