Permalink
Find file
Fetching contributors…
Cannot retrieve contributors at this time
445 lines (390 sloc) 14.3 KB
# Copyright 1998, 2000, 2001, 2002, 2003, 2004, 2007, 2008, 2009, 2010
# Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# This file was written by Kendra.
if $tracelevel then {
strace $tracelevel
}
#
# Test debugging assembly level programs.
# This file uses asmsrc[12].s for input.
#
set asm-arch ""
set asm-note "empty"
set asm-flags ""
set link-flags "-e _start"
set debug-flags ""
switch -glob -- [istarget] {
"alpha*-*-*" {
set asm-arch alpha
# ??? Won't work with ecoff systems like Tru64, but then we also
# don't have any other -g flag that creates mdebug output.
set asm-flags "-no-mdebug -I${srcdir}/${subdir} -I${objdir}/${subdir}"
set debug-flags "-gdwarf-2"
}
"*arm-*-*" {
set asm-arch arm
}
"xscale-*-*" {
set asm-arch arm
}
"frv-*-*" {
set asm-arch frv
}
"s390-*-*" {
set asm-arch s390
}
"s390x-*-*" {
set asm-arch s390x
}
"x86_64-*-*" {
set asm-arch x86_64
set debug-flags "-gdwarf-2"
}
"i\[3456\]86-*-*" {
set asm-arch i386
}
"lm32-*" {
set asm-arch lm32
}
"m32r*-linux*" {
set asm-arch m32r-linux
}
"m32c-*-*" {
set asm-arch m32c
}
"m32r*-*" {
set asm-arch m32r
append link-flags "--whole-archive -lgloss --no-whole-archive"
}
"m6811-*-*" {
set asm-arch m68hc11
set asm-flags "-mshort-double -m68hc11 --no-warn -I${srcdir}/${subdir} -I${objdir}/${subdir}"
set debug-flags "-gdwarf-2"
# This asm test is specific and uses the linker directly.
# We must not use the target board linker script defined for other
# tests. Remove it and restore it later on.
set board [target_info name]
set old_ldscript [board_info $board ldscript]
unset_board_info "ldscript"
}
"m6812-*-*" {
set asm-arch m68hc11
set asm-flags "-mshort-double -m68hc12 --no-warn -I${srcdir}/${subdir} -I${objdir}/${subdir}"
set debug-flags "-gdwarf-2"
# This asm test is specific and uses the linker directly.
# We must not use the target board linker script defined for other
# tests. Remove it and restore it later on.
set board [target_info name]
set old_ldscript [board_info $board ldscript]
set_board_info ldscript ""
}
"mips*-*" {
set asm-arch mips
}
"powerpc*-*" {
set asm-arch powerpc
}
"sh*-*-*" {
set asm-arch sh
set debug-flags "-gdwarf-2"
}
"sparc-*-*" {
set asm-arch sparc
}
"sparc64-*-*" {
set asm-arch sparc64
set asm-flags "-xarch=v9 -I${srcdir}/${subdir} -I${objdir}/${subdir}"
set debug-flags "-gdwarf-2"
}
"spu*-*-*" {
set asm-arch spu
set asm-flags "-I${srcdir}/${subdir} -I${objdir}/${subdir} --no-warn"
set debug-flags "-gdwarf-2"
}
"xstormy16-*-*" {
set asm-arch xstormy16
set debug-flags "-gdwarf-2"
}
"v850-*-*" {
set asm-arch v850
set gdb_wrapper_initialized 1
}
"m68k-*-*" {
set asm-arch m68k
}
"ia64-*-*" {
set asm-arch ia64
set debug-flags "-gdwarf-2"
}
"iq2000-*-*" {
set asm-arch iq2000
}
"hppa*-linux-*" {
set asm-arch pa
set debug-flags "-gdwarf-2"
}
"hppa-*-openbsd*" {
set asm-arch pa
set debug-flags "-gdwarf-2"
}
"hppa64-*-hpux*" {
set asm-arch pa64
set debug-flags "-gdwarf-2"
}
"h83*-*" {
set asm-arch h8300
set debug-flags "-gdwarf-2"
}
}
if { "${asm-arch}" == "" } {
untested asm-source.exp
return -1
}
# On NetBSD/ELF we need a special NetBSD-identifying note section.
if { [istarget "*-*-netbsdelf*"]
|| [istarget "alpha-*-netbsd*"]
|| [istarget "mips*-*-netbsd*"]
|| [istarget "powerpc-*-netbsd*"]
|| [istarget "x86_64-*-netbsd*"] } then {
set asm-note "netbsd"
}
# On OpenBSD/ELF we need a similar note section. We make no attempt
# of handing a.out here since most OpenBSD/a.out systems use a rather
# outdated assembler that doesn't assemble this test's code anyway.
if { [istarget "*-*-openbsd*"] } then {
set asm-note "openbsd"
}
# Watch out, we are invoking the assembler, but the testsuite sets multilib
# switches according to compiler syntax. If we pass these options straight
# to the assembler, they won't always make sense. If we don't pass them to
# the assembler, the final link will complain that the object files were
# built with different defaults. So no matter what we do, we lose. We may as
# well get out of this test sooner rather than later.
set dest [target_info name]
if [board_info $dest exists multilib_flags] {
set multilib_flags [board_info $dest multilib_flags]
if { "${multilib_flags}" != "" } {
untested asm-source.exp
return -1
return;
}
}
set testfile "asm-source"
set binfile ${objdir}/${subdir}/${testfile}
set srcfile1 asmsrc1.s
set srcfile2 asmsrc2.s
remote_exec build "rm -f ${subdir}/arch.inc"
remote_download host ${srcdir}/${subdir}/${asm-arch}.inc ${subdir}/arch.inc
remote_exec build "rm -f ${subdir}/note.inc"
remote_download host ${srcdir}/${subdir}/${asm-note}.inc ${subdir}/note.inc
if { [string equal ${asm-flags} ""] } {
set asm-flags "-I${srcdir}/${subdir} -I${objdir}/${subdir}"
}
if { [string equal ${debug-flags} ""] } {
set debug-flags "-gstabs"
}
# Allow the target board to override the debug flags.
if { [board_info $dest exists debug_flags] } then {
set debug-flags "[board_info $dest debug_flags]"
}
# The debug flags are in the format that gcc expects:
# "-gdwarf-2", "-gstabs+", or "-gstabs". To be compatible with the
# other languages in the test suite, we accept this input format.
# So the user can run the test suite with:
#
# runtest --target_board unix/gdb:debug_flags=-gdwarf-2
# make check RUNTESTFLAGS="--target_board unix/gdb:debug_flags=-gdwarf-2"
#
# However, the GNU assembler has different spellings than gcc.
# So I adjust the debug flags here.
# The GNU assembler spells "dwarf-2" as "dwarf2".
regsub "--" "-gdwarf-2" "${debug-flags}" "-gdwarf2" debug-flags
# The GNU assembler before 2.15 did not support "stabs+".
regsub "--" "-gstabs\[+\]" "${debug-flags}" "-gstabs" debug-flags
# The GNU assembler does not support level options like "-g2" or "-g3".
regsub "--" "-g\[0-9\]" "${debug-flags}" "" debug-flags
if {[target_assemble ${srcdir}/${subdir}/${srcfile1} asmsrc1.o "${asm-flags} ${debug-flags}"] != ""} then {
untested asm-source.exp
return -1
}
if {[target_assemble ${srcdir}/${subdir}/${srcfile2} asmsrc2.o "${asm-flags} ${debug-flags}"] != ""} then {
untested asm-source.exp
return -1
}
# We deliberately don't use gdb_compile here to link together the
# assembled object files. Using gdb_compile, and therefore the C
# compiler, is conceptually wrong, since we're testing raw assembler
# code here that provides its own startup code. Using target_link
# also avoids a lot of problems on many systems, most notably on
# *-*-*bsd* and *-*-solaris2*.
if {[target_link "asmsrc1.o asmsrc2.o" "${binfile}" ${link-flags}] != "" } then {
untested asm-source.exp
return -1
}
# Restore the target board linker script for HC11/HC12.
if { [istarget "m6811-*-*"] || [istarget "m6812-*-*"] } {
set_board_info ldscript $old_ldscript
}
remote_exec build "mv asmsrc1.o asmsrc2.o ${objdir}/${subdir}"
# Collect some line numbers.
set line_main [expr [gdb_get_line_number "main start" "asmsrc1.s"] + 1]
set line_call_foo2 [expr [gdb_get_line_number "call foo2" "asmsrc1.s"] + 1]
set line_search_comment [expr [gdb_get_line_number "search" "asmsrc1.s"] + 1]
set line_foo3 [expr [gdb_get_line_number "foo3 start" "asmsrc1.s"] + 1]
set line_main_exit [expr [gdb_get_line_number "main exit" "asmsrc1.s"] + 1]
set line_foo2 [expr [gdb_get_line_number "foo2 start" "asmsrc2.s"] + 1]
set line_call_foo3 [expr [gdb_get_line_number "call foo3" "asmsrc2.s"] + 1]
set line_call_foo3_again [expr $line_call_foo3 + 1]
set line_foo2_leave [expr [gdb_get_line_number "foo2 leave" "asmsrc2.s"] + 1]
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
#
# Run to `main' where we begin our tests.
#
if ![runto_main] then {
gdb_suppress_tests
}
# Execute the `f' command and see if the result includes source info.
gdb_test "f" "asmsrc1\[.\]s:$line_main.*several_nops" "f at main"
# See if we properly `next' over a macro with several insns.
gdb_test "n" "$line_call_foo2\[ \]*.*foo2" "next over macro"
# See if we can properly `step' into a subroutine call.
gdb_test "s" "$line_foo2\[ \]*.*" "step into foo2"
# Test 'info target', and incidentally capture the entry point address.
set entry_point 0
gdb_test_multiple "info target" "info target" {
-re "Symbols from .*asm-source.*Entry point: 0x(\[01232456789abcdefABCDEF\]+).*$gdb_prompt $" {
set entry_point $expect_out(1,string)
pass "info target"
}
}
# Capture the start symbol (may be '_start' or 'start')
set entry_symbol ""
gdb_test_multiple "info symbol 0x$entry_point" "info symbol" {
-re "info symbol 0x$entry_point\[\r\n\]+(\[^\r\n\]*) in section .*$gdb_prompt $" {
# We match the echoed `info symbol' command here, to help us
# reliably identify the beginning of the start symbol in the
# command's output. You might think we could just use '^' to
# start matching at the beginning of the line, but
# unfortunately, in Expect, '^' matches the beginning of the
# input that hasn't been matched by any expect clause yet. If
# every expect clause consumes a complete line, along with its
# terminating CR/LF, this is equivalent to the beginning of a
# line. But expect clauses that end with `.*' will consume as
# much as happened to arrive from the TTY --- exactly where
# they leave you depends on inter-process timing. :(
set entry_symbol $expect_out(1,string)
pass "info symbol"
}
}
# Now try a 'list' from the other source file.
gdb_test "list $entry_symbol" ".*gdbasm_startup.*" "list"
# Now try a source file search
gdb_test "search A routine for foo2 to call" \
"$line_search_comment\[ \t\]+comment \"A routine for foo2 to call.\"" "search"
# See if `f' prints the right source file.
gdb_test "f" ".*asmsrc2\[.\]s:$line_foo2.*" "f in foo2"
# `next' one insn (or macro) to set up our stackframe (for the following bt).
gdb_test "n" "$line_call_foo3\[ \]*.*foo3" "n in foo2"
# See if a simple `bt' prints the right source files and
# doesn't fall off the stack.
gdb_test "bt 10" \
"\#0.*foo2.*asmsrc2\[.\]s:$line_call_foo3.*\#1.*main.*asmsrc1\[.\]s:$line_call_foo2" \
"bt ALL in foo2"
# See if a capped `bt' prints the right source files.
gdb_test "bt 2" "\#0.*foo2.*asmsrc2\[.\]s:$line_call_foo3.*\#1.*main.*asmsrc1\[.\]s:$line_call_foo2.*" "bt 2 in foo2"
# Step into another subroutine which lives back in the first source file.
gdb_test "s" ".*" "s 2"
# Next over insns to set up the stack frame.
gdb_test "n" ".*" "n 2"
# Now see if a capped `bt' is correct.
gdb_test "bt 3" "\#0.*foo3.*asmsrc1\[.\]s:$line_foo3.*\#1.*foo2.*asmsrc2\[.\]s:$line_call_foo3.*\#2.*main.*asmsrc1\[.\]s:$line_call_foo2.*" "bt 3 in foo3"
# Try 'info source' from asmsrc1.s
gdb_test "info source" \
"Current source file is .*asmsrc1.s.*Source language is asm.*" \
"info source asmsrc1.s"
# Try 'finishing' from foo3
gdb_test "finish" "Run till exit from.*\[\r\n\]$line_call_foo3_again\[ \t\]+gdbasm_call foo3" \
"finish from foo3"
# Try 'info source' from asmsrc2.s
gdb_test "info source" \
"Current source file is .*asmsrc2.s.*Source language is asm.*" \
"info source asmsrc2.s"
# Try 'info sources'. This can produce a lot of output on systems
# with dynamic linking, where the system's shared libc was compiled
# with debugging info; for example, on Linux, this produces 47kb of
# output. So we consume it as we go.
set seen_asmsrc_1 0
set seen_asmsrc_2 0
gdb_test_multiple "info sources" "info sources" {
-re "^\[^,\]*asmsrc1.s(, |\[\r\n\]+)" {
set seen_asmsrc_1 1
exp_continue
}
-re "^\[^,\]*asmsrc2.s(, |\[\r\n\]+)" {
set seen_asmsrc_2 1
exp_continue
}
-re ", " {
exp_continue
}
-re "$gdb_prompt $" {
if {$seen_asmsrc_1 && $seen_asmsrc_2} {
pass "info sources"
} else {
fail "info sources"
}
}
}
# Try 'info line'
gdb_test "info line" \
"Line $line_call_foo3_again of.*asmsrc2.s.*starts at.*<foo2+.*> and ends at.*<foo2+.*>." \
"info line"
# Try 'nexting' over next call to foo3
gdb_test "next" "$line_foo2_leave\[ \t\]+gdbasm_leave" "next over foo3"
# Try 'return' from foo2
gdb_test "return" "\#0 main .*$line_main_exit\[ \t\]+gdbasm_exit0" "return from foo2" \
"Make (foo2|selected stack frame) return now\?.*" "y"
# Disassemble something, check the output
proc test_dis { command var } {
global gdb_prompt
gdb_test_multiple "${command}" "${command}" {
-re "${var}.*:.*(Cannot access|Bad address)" {
# The "disassembler" was only accessing the local
# executable and that would cause attempts to disassemble
# variables to fail (memory not valid).
fail "${command} (memory read error)"
}
-re "${var}.*:.*${gdb_prompt}" {
pass "${command}"
}
}
}
# See if we can look at a global variable, three ways
gdb_test "print globalvar" ".* = 11" "look at global variable"
test_dis "x/i &globalvar" "globalvar"
test_dis "disassem &globalvar, &globalvar+1" "globalvar"
# See if we can look at a static variable, three ways
gdb_test "print staticvar" ".* = 5" "look at static variable"
test_dis "x/i &staticvar" "staticvar"
test_dis "disassem &staticvar, &staticvar+1" "staticvar"
# See if we can look at a static function
gdb_test "disassem foostatic" ".*<\\+0>:.*End of assembler dump." \
"look at static function"
remote_exec build "rm -f ${subdir}/arch.inc"
remote_exec build "rm -f ${subdir}/note.inc"