Skip to content
Find file
Fetching contributors…
Cannot retrieve contributors at this time
1266 lines (1206 sloc) 50.6 KB
Index: Makefile.def
===================================================================
RCS file: /cvsroot/gcc/gcc/Makefile.def,v
retrieving revision 1.3.4.8
diff --unified=15 -r1.3.4.8 Makefile.def
--- Makefile.def 17 Dec 2002 20:45:41 -0000 1.3.4.8
+++ Makefile.def 7 Jan 2003 03:27:57 -0000
@@ -64,30 +64,31 @@
host_modules= { module= wdiff; };
host_modules= { module= zip; no_check_cross=true; };
host_modules= { module= zlib; no_install=true; no_check=true; };
host_modules= { module= gdb; with_x=true; };
host_modules= { module= expect; with_x=true; };
host_modules= { module= guile; with_x=true; };
host_modules= { module= tk; with_x=true; };
host_modules= { module= tix; with_x=true; };
host_modules= { module= libtermcap; no_check=true; no_clean=true; };
host_modules= { module= utils; no_check=true; };
target_modules = { module= libstdc++-v3; raw_cxx=true; };
target_modules = { module= libmudflap; };
target_modules = { module= newlib; };
target_modules = { module= libf2c; };
+target_modules = { module= libgfor; };
target_modules = { module= libobjc; };
target_modules = { module= libtermcap; no_check=true; no_clean=true; };
target_modules = { module= winsup; };
target_modules = { module= libgloss; no_check=true; };
target_modules = { module= libiberty; };
target_modules = { module= gperf; };
target_modules = { module= examples; no_check=true; no_install=true; };
target_modules = { module= libffi; no_install=true; };
target_modules = { module= libjava; raw_cxx=true; };
target_modules = { module= zlib; };
target_modules = { module= boehm-gc; };
target_modules = { module= qthreads; };
target_modules = { module= rda; };
// These are (some of) the targets to be done in each subdirectory.
Index: Makefile.in
===================================================================
RCS file: /cvsroot/gcc/gcc/Makefile.in,v
retrieving revision 1.104.2.15
diff --unified=15 -r1.104.2.15 Makefile.in
--- Makefile.in 27 Dec 2002 01:50:49 -0000 1.104.2.15
+++ Makefile.in 7 Jan 2003 03:28:06 -0000
@@ -249,30 +249,31 @@
# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
# Some platforms don't like blank entries, so we remove duplicate,
# leading and trailing colons.
REALLY_SET_LIB_PATH = \
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
# Should be substed by configure.in
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
CC_FOR_TARGET = @CC_FOR_TARGET@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
RAW_CXX_FOR_TARGET = @RAW_CXX_FOR_TARGET@
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
GCJ_FOR_TARGET = @GCJ_FOR_TARGET@
+G95_FOR_TARGET = @G95_FOR_TARGET@
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
GCC_FOR_TARGET=@GCC_FOR_TARGET@
USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
AS_FOR_TARGET=@AS_FOR_TARGET@
USUAL_AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
$(CC_FOR_TARGET) -print-prog-name=as ; \
else \
@@ -371,30 +372,31 @@
#### host and target specific makefile fragments come in here.
###
# Flags to pass down to all sub-makes.
# Please keep these in alphabetical order.
BASE_FLAGS_TO_PASS = \
"AR_FLAGS=$(AR_FLAGS)" \
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
"AS_FOR_TARGET=$(AS_FOR_TARGET)" \
"BISON=$(BISON)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
+ "G95_FOR_TARGET=$(G95_FOR_TARGET)" \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"LD_FOR_TARGET=$(LD_FOR_TARGET)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"LIBCXXFLAGS=$(LIBCXXFLAGS)" \
@@ -588,30 +590,31 @@
clean-texinfo \
clean-textutils \
clean-time \
clean-uudecode \
clean-wdiff \
clean-zip \
clean-zlib \
clean-utils
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
clean-target-libstdc++-v3 \
clean-target-libmudflap \
clean-target-newlib \
clean-target-libf2c \
+ clean-target-libgfor \
clean-target-libobjc \
clean-target-winsup \
clean-target-libgloss \
clean-target-libiberty \
clean-target-gperf \
clean-target-examples \
clean-target-libffi \
clean-target-libjava \
clean-target-zlib \
clean-target-boehm-gc \
clean-target-qthreads \
clean-target-rda
# All of the x11 modules that can be cleaned
CLEAN_X11_MODULES = \
@@ -1236,30 +1239,31 @@
.PHONY: configure-build-libiberty maybe-configure-build-libiberty
maybe-configure-build-libiberty:
configure-build-libiberty: $(BUILD_SUBDIR)/libiberty/Makefile
$(BUILD_SUBDIR)/libiberty/Makefile: config.status
@[ -d $(BUILD_SUBDIR)/libiberty ] || mkdir $(BUILD_SUBDIR)/libiberty;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
AR="$(AR_FOR_BUILD)"; export AR; \
AS="$(AS_FOR_BUILD)"; export AS; \
CC="$(CC_FOR_BUILD)"; export CC; \
CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
CXX="$(CXX_FOR_BUILD)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+ G95="$(G95_FOR_BUILD)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
LD="$(LD_FOR_BUILD)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
NM="$(NM_FOR_BUILD)"; export NM; \
RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
echo Configuring in $(BUILD_SUBDIR)/libiberty; \
cd "$(BUILD_SUBDIR)/libiberty" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(BUILD_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -5921,30 +5925,31 @@
cp multilib.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out
$(TARGET_SUBDIR)/libstdc++-v3/Makefile: config.status $(TARGET_SUBDIR)/libstdc++-v3/multilib.out
@[ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
CXX="$(RAW_CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libstdc++-v3; \
cd "$(TARGET_SUBDIR)/libstdc++-v3" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6020,30 +6025,31 @@
echo "Configuring multilibs for libmudflap"; \
$(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libmudflap/multilib.out 2> /dev/null
$(TARGET_SUBDIR)/libmudflap/Makefile: config.status $(TARGET_SUBDIR)/libmudflap/multilib.out
@[ -d $(TARGET_SUBDIR)/libmudflap ] || mkdir $(TARGET_SUBDIR)/libmudflap;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libmudflap; \
cd "$(TARGET_SUBDIR)/libmudflap" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6116,30 +6122,31 @@
@[ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
cp multilib.out $(TARGET_SUBDIR)/newlib/multilib.out
$(TARGET_SUBDIR)/newlib/Makefile: config.status $(TARGET_SUBDIR)/newlib/multilib.out
@[ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/newlib; \
cd "$(TARGET_SUBDIR)/newlib" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6212,30 +6219,31 @@
@[ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
cp multilib.out $(TARGET_SUBDIR)/libf2c/multilib.out
$(TARGET_SUBDIR)/libf2c/Makefile: config.status $(TARGET_SUBDIR)/libf2c/multilib.out
@[ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libf2c; \
cd "$(TARGET_SUBDIR)/libf2c" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6287,51 +6295,152 @@
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/libf2c && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check)
.PHONY: install-target-libf2c maybe-install-target-libf2c
maybe-install-target-libf2c:
install-target-libf2c: installdirs
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/libf2c && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install)
+.PHONY: configure-target-libgfor maybe-configure-target-libgfor
+maybe-configure-target-libgfor:
+configure-target-libgfor: $(TARGET_SUBDIR)/libgfor/Makefile
+
+# Don't manually override CC_FOR_TARGET at make time; get it set right
+# at configure time. Otherwise multilibs may be wrong.
+$(TARGET_SUBDIR)/libgfor/multilib.out: maybe-all-gcc
+ @[ -d $(TARGET_SUBDIR)/libgfor ] || mkdir $(TARGET_SUBDIR)/libgfor;\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for libgfor"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgfor/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/libgfor/Makefile: config.status $(TARGET_SUBDIR)/libgfor/multilib.out
+ @[ -d $(TARGET_SUBDIR)/libgfor ] || mkdir $(TARGET_SUBDIR)/libgfor;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libgfor; \
+ cd "$(TARGET_SUBDIR)/libgfor" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libgfor "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libgfor"; \
+ libsrcdir="$$s/libgfor"; \
+ fi; \
+ rm -f no-such-file || : ; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)" \
+ || exit 1
+
+.PHONY: all-target-libgfor maybe-all-target-libgfor
+maybe-all-target-libgfor:
+all-target-libgfor: configure-target-libgfor
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libgfor; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all)
+
+.PHONY: check-target-libgfor
+check-target-libgfor:
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libgfor; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check)
+
+
+.PHONY: install-target-libgfor maybe-install-target-libgfor
+maybe-install-target-libgfor:
+install-target-libgfor: installdirs
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libgfor; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install)
+
+
.PHONY: configure-target-libobjc maybe-configure-target-libobjc
maybe-configure-target-libobjc:
configure-target-libobjc: $(TARGET_SUBDIR)/libobjc/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libobjc/multilib.out: multilib.out
@[ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
cp multilib.out $(TARGET_SUBDIR)/libobjc/multilib.out
$(TARGET_SUBDIR)/libobjc/Makefile: config.status $(TARGET_SUBDIR)/libobjc/multilib.out
@[ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libobjc; \
cd "$(TARGET_SUBDIR)/libobjc" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6404,30 +6513,31 @@
@[ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
cp multilib.out $(TARGET_SUBDIR)/libtermcap/multilib.out
$(TARGET_SUBDIR)/libtermcap/Makefile: config.status $(TARGET_SUBDIR)/libtermcap/multilib.out
@[ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libtermcap; \
cd "$(TARGET_SUBDIR)/libtermcap" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6496,30 +6606,31 @@
@[ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
cp multilib.out $(TARGET_SUBDIR)/winsup/multilib.out
$(TARGET_SUBDIR)/winsup/Makefile: config.status $(TARGET_SUBDIR)/winsup/multilib.out
@[ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/winsup; \
cd "$(TARGET_SUBDIR)/winsup" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6592,30 +6703,31 @@
@[ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
cp multilib.out $(TARGET_SUBDIR)/libgloss/multilib.out
$(TARGET_SUBDIR)/libgloss/Makefile: config.status $(TARGET_SUBDIR)/libgloss/multilib.out
@[ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libgloss; \
cd "$(TARGET_SUBDIR)/libgloss" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6684,30 +6796,31 @@
@[ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
cp multilib.out $(TARGET_SUBDIR)/libiberty/multilib.out
$(TARGET_SUBDIR)/libiberty/Makefile: config.status $(TARGET_SUBDIR)/libiberty/multilib.out
@[ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libiberty; \
cd "$(TARGET_SUBDIR)/libiberty" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6780,30 +6893,31 @@
@[ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
cp multilib.out $(TARGET_SUBDIR)/gperf/multilib.out
$(TARGET_SUBDIR)/gperf/Makefile: config.status $(TARGET_SUBDIR)/gperf/multilib.out
@[ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/gperf; \
cd "$(TARGET_SUBDIR)/gperf" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6876,30 +6990,31 @@
@[ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
cp multilib.out $(TARGET_SUBDIR)/examples/multilib.out
$(TARGET_SUBDIR)/examples/Makefile: config.status $(TARGET_SUBDIR)/examples/multilib.out
@[ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/examples; \
cd "$(TARGET_SUBDIR)/examples" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -6964,30 +7079,31 @@
@[ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
cp multilib.out $(TARGET_SUBDIR)/libffi/multilib.out
$(TARGET_SUBDIR)/libffi/Makefile: config.status $(TARGET_SUBDIR)/libffi/multilib.out
@[ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libffi; \
cd "$(TARGET_SUBDIR)/libffi" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -7057,30 +7173,31 @@
cp multilib.out $(TARGET_SUBDIR)/libjava/multilib.out
$(TARGET_SUBDIR)/libjava/Makefile: config.status $(TARGET_SUBDIR)/libjava/multilib.out
@[ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
CXX="$(RAW_CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/libjava; \
cd "$(TARGET_SUBDIR)/libjava" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -7153,30 +7270,31 @@
@[ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
cp multilib.out $(TARGET_SUBDIR)/zlib/multilib.out
$(TARGET_SUBDIR)/zlib/Makefile: config.status $(TARGET_SUBDIR)/zlib/multilib.out
@[ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/zlib; \
cd "$(TARGET_SUBDIR)/zlib" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -7249,30 +7367,31 @@
@[ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
cp multilib.out $(TARGET_SUBDIR)/boehm-gc/multilib.out
$(TARGET_SUBDIR)/boehm-gc/Makefile: config.status $(TARGET_SUBDIR)/boehm-gc/multilib.out
@[ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/boehm-gc; \
cd "$(TARGET_SUBDIR)/boehm-gc" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -7345,30 +7464,31 @@
@[ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
cp multilib.out $(TARGET_SUBDIR)/qthreads/multilib.out
$(TARGET_SUBDIR)/qthreads/Makefile: config.status $(TARGET_SUBDIR)/qthreads/multilib.out
@[ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/qthreads; \
cd "$(TARGET_SUBDIR)/qthreads" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -7441,30 +7561,31 @@
@[ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
cp multilib.out $(TARGET_SUBDIR)/rda/multilib.out
$(TARGET_SUBDIR)/rda/Makefile: config.status $(TARGET_SUBDIR)/rda/multilib.out
@[ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/rda; \
cd "$(TARGET_SUBDIR)/rda" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -7788,30 +7909,32 @@
all-send-pr: maybe-all-prms
all-snavigator: maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-db maybe-all-grep maybe-all-libgui
all-tar: maybe-all-libiberty
all-uudecode: maybe-all-libiberty
ALL_GCC = maybe-all-gcc
ALL_GCC_C = $(ALL_GCC) maybe-all-target-newlib maybe-all-target-libgloss
ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
# Target modules specific to gcc.
configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
configure-target-fastjar: maybe-configure-target-zlib
all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: maybe-all-target-libiberty
+configure-target-libgfor: $(ALL_GCC_C)
+all-target-libgfor: maybe-all-target-libiberty
configure-target-libffi: $(ALL_GCC_C)
configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: maybe-all-target-libiberty
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: maybe-all-target-libiberty
configure-target-zlib: $(ALL_GCC_C)
# Target modules in the 'src' repository.
configure-target-examples: $(ALL_GCC_C)
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: maybe-configure-target-newlib
configure-target-libiberty: $(ALL_GCC_C)
configure-target-libtermcap: $(ALL_GCC_C)
Index: Makefile.tpl
===================================================================
RCS file: /cvsroot/gcc/gcc/Makefile.tpl,v
retrieving revision 1.11.2.9
diff --unified=15 -r1.11.2.9 Makefile.tpl
--- Makefile.tpl 27 Dec 2002 01:50:50 -0000 1.11.2.9
+++ Makefile.tpl 7 Jan 2003 03:28:08 -0000
@@ -252,30 +252,31 @@
# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
# Some platforms don't like blank entries, so we remove duplicate,
# leading and trailing colons.
REALLY_SET_LIB_PATH = \
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
# Should be substed by configure.in
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
CC_FOR_TARGET = @CC_FOR_TARGET@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
RAW_CXX_FOR_TARGET = @RAW_CXX_FOR_TARGET@
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
GCJ_FOR_TARGET = @GCJ_FOR_TARGET@
+G95_FOR_TARGET = @G95_FOR_TARGET@
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
GCC_FOR_TARGET=@GCC_FOR_TARGET@
USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
AS_FOR_TARGET=@AS_FOR_TARGET@
USUAL_AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
$(CC_FOR_TARGET) -print-prog-name=as ; \
else \
@@ -374,30 +375,31 @@
#### host and target specific makefile fragments come in here.
###
# Flags to pass down to all sub-makes.
# Please keep these in alphabetical order.
BASE_FLAGS_TO_PASS = \
"AR_FLAGS=$(AR_FLAGS)" \
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
"AS_FOR_TARGET=$(AS_FOR_TARGET)" \
"BISON=$(BISON)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
+ "G95_FOR_TARGET=$(G95_FOR_TARGET)" \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"LD_FOR_TARGET=$(LD_FOR_TARGET)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"LIBCXXFLAGS=$(LIBCXXFLAGS)" \
@@ -791,30 +793,31 @@
[+ FOR build_modules +]
.PHONY: configure-build-[+module+] maybe-configure-build-[+module+]
maybe-configure-build-[+module+]:
configure-build-[+module+]: $(BUILD_SUBDIR)/[+module+]/Makefile
$(BUILD_SUBDIR)/[+module+]/Makefile: config.status
@[ -d $(BUILD_SUBDIR)/[+module+] ] || mkdir $(BUILD_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
AR="$(AR_FOR_BUILD)"; export AR; \
AS="$(AS_FOR_BUILD)"; export AS; \
CC="$(CC_FOR_BUILD)"; export CC; \
CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
CXX="$(CXX_FOR_BUILD)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+ G95="$(G95_FOR_BUILD)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
LD="$(LD_FOR_BUILD)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
NM="$(NM_FOR_BUILD)"; export NM; \
RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
echo Configuring in $(BUILD_SUBDIR)/[+module+]; \
cd "$(BUILD_SUBDIR)/[+module+]" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(BUILD_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -978,30 +981,31 @@
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \[+
IF raw_cxx +]
CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \
CXX="$(RAW_CXX_FOR_TARGET)"; export CXX; \[+
ELSE normal_cxx +]
CXX="$(CXX_FOR_TARGET)"; export CXX; \[+
ENDIF raw_cxx +]
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ G95="$(G95_FOR_TARGET)"; export G95; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/[+module+]; \
cd "$(TARGET_SUBDIR)/[+module+]" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
@@ -1342,30 +1346,32 @@
all-send-pr: maybe-all-prms
all-snavigator: maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-db maybe-all-grep maybe-all-libgui
all-tar: maybe-all-libiberty
all-uudecode: maybe-all-libiberty
ALL_GCC = maybe-all-gcc
ALL_GCC_C = $(ALL_GCC) maybe-all-target-newlib maybe-all-target-libgloss
ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
# Target modules specific to gcc.
configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
configure-target-fastjar: maybe-configure-target-zlib
all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: maybe-all-target-libiberty
+configure-target-libgfor: $(ALL_GCC_C)
+all-target-libgfor: maybe-all-target-libiberty
configure-target-libffi: $(ALL_GCC_C)
configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: maybe-all-target-libiberty
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: maybe-all-target-libiberty
configure-target-zlib: $(ALL_GCC_C)
# Target modules in the 'src' repository.
configure-target-examples: $(ALL_GCC_C)
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: maybe-configure-target-newlib
configure-target-libiberty: $(ALL_GCC_C)
configure-target-libtermcap: $(ALL_GCC_C)
Index: configure.in
===================================================================
RCS file: /cvsroot/gcc/gcc/configure.in,v
retrieving revision 1.161.2.17
diff --unified=15 -r1.161.2.17 configure.in
--- configure.in 27 Dec 2002 01:50:50 -0000 1.161.2.17
+++ configure.in 7 Jan 2003 03:28:10 -0000
@@ -88,30 +88,31 @@
libgcj="target-libffi \
target-boehm-gc \
target-zlib \
target-qthreads \
target-libjava"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
target_libs="target-libiberty \
target-libgloss \
target-newlib \
${libstdcxx_version} \
target-libmudflap \
target-libf2c \
+ target-libgfor \
${libgcj}
target-libobjc"
# these tools are built using the target libs, and are intended to run only
# in the target environment
#
# note: any program that *uses* libraries that are in the "target_libs"
# list belongs in this list. those programs are also very likely
# candidates for the "native_only" list which follows
#
target_tools="target-examples target-groff target-gperf target-rda"
################################################################################
## All tools belong in one of the four categories, and are assigned above
@@ -1654,30 +1655,44 @@
if test "x${GCJ_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
elif test "$host" = "$target"; then
GCJ_FOR_TARGET='gcj'
else
GCJ_FOR_TARGET=`echo gcj | sed -e 's/x/x/' ${program_transform_name}`
fi
case $GCJ_FOR_TARGET in
*' $(FLAGS_FOR_TARGET)') ;;
*) GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
esac
+if test "x${G95_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${srcdir}/gcc; then
+ G95_FOR_TARGET='$$r/gcc/g95 -B$$r/gcc/'
+elif test "$host" = "$target"; then
+ G95_FOR_TARGET='g95'
+else
+ G95_FOR_TARGET=`echo g95 | sed -e 's/x/x/' ${program_transform_name}`
+fi
+case $G95_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) G95_FOR_TARGET=$G95_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+
# Don't use libstdc++-v3's flags to configure/build itself.
libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
if test "x${CXX_FOR_TARGET+set}" = xset; then
:
elif test -d ${srcdir}/gcc; then
# We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
# of g++ for linking C++ or Java, because g++ has -shared-libgcc by
# default whereas gcc does not.
# RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
# all other cases.
CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
elif test "$host" = "$target"; then
@@ -1715,30 +1730,31 @@
s%@all_build_modules@%${all_build_modules}%
s%@configure_host_modules@%${configure_host_modules}%
s%@all_host_modules@%${all_host_modules}%
s%@check_host_modules@%${check_host_modules}%
s%@install_host_modules@%${install_host_modules}%
s%@install_host_modules_nogcc@%${install_host_modules_nogcc}%
s%@configure_target_modules@%${configure_target_modules}%
s%@all_target_modules@%${all_target_modules}%
s%@check_target_modules@%${check_target_modules}%
s%@install_target_modules@%${install_target_modules}%
s:@target_configdirs@:${target_configdirs}:
s%@target_configargs@%${targargs}%
s%@FLAGS_FOR_TARGET@%${FLAGS_FOR_TARGET}%
s%@CC_FOR_TARGET@%\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}%
s%@GCJ_FOR_TARGET@%\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}%
+s%@G95_FOR_TARGET@%\$(STAGE_CC_WRAPPER) ${G95_FOR_TARGET}%
s%@CXX_FOR_TARGET@%\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}%
s%@RAW_CXX_FOR_TARGET@%\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}%
s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}%
s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}%
s%@target_subdir@%${target_subdir}%
s%@build_subdir@%${build_subdir}%
s%@build_configargs@%${buildargs}%
s%@gxx_include_dir@%${gxx_include_dir}%
s%@libstdcxx_incdir@%${libstdcxx_incdir}%
s%@host_configargs@%${hostargs}%
EOF
sed -f $sedtemp Makefile > Makefile.tem
rm -f Makefile $sedtemp
mv -f Makefile.tem Makefile
Index: gcc/Makefile.in
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/Makefile.in,v
retrieving revision 1.903.2.60
diff --unified=15 -r1.903.2.60 Makefile.in
--- gcc/Makefile.in 3 Jan 2003 01:57:16 -0000 1.903.2.60
+++ gcc/Makefile.in 7 Jan 2003 03:28:16 -0000
@@ -159,30 +159,32 @@
# do not correctly set the timestamp due to buggy versions of `utime'
# in the kernel. So, we use `echo' instead.
STAMP = echo timestamp >
# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
# -I../zlib, unless we were configured with --with-system-zlib, in which
# case both are empty.
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
BANSHEELIB = @BANSHEELIB@
BANSHEEINC = @BANSHEEINC@
# Substitution type for target's getgroups 2nd arg.
TARGET_GETGROUPS_T = @TARGET_GETGROUPS_T@
+F95_LIBS = @F95_LIBS@ $(BANSHEELIB) $(LIBIBERTY)
+
# Target to use when installing include directory. Either
# install-headers-tar, install-headers-cpio or install-headers-cp.
INSTALL_HEADERS_DIR = @build_install_headers_dir@
# Header files that are made available under the same name
# to programs compiled with GCC.
USER_H = $(srcdir)/ginclude/float.h \
$(srcdir)/ginclude/iso646.h \
$(srcdir)/ginclude/stdarg.h \
$(srcdir)/ginclude/stdbool.h \
$(srcdir)/ginclude/stddef.h \
$(srcdir)/ginclude/varargs.h \
$(EXTRA_HEADERS)
# The GCC to use for compiling libgcc.a and crt*.o.
Index: gcc/configure.in
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/configure.in,v
retrieving revision 1.606.2.16
diff --unified=15 -r1.606.2.16 configure.in
--- gcc/configure.in 27 Dec 2002 01:51:12 -0000 1.606.2.16
+++ gcc/configure.in 7 Jan 2003 03:28:19 -0000
@@ -72,30 +72,61 @@
;;
*)
gcc_exec_prefix_setting="ok"
;;
esac
changequote([,])dnl
AC_MSG_RESULT($gcc_exec_prefix_setting)
if test "$gcc_exec_prefix_setting" != "ok"; then
AC_MSG_ERROR([
*** GCC_EXEC_PREFIX shouldn't contain the current directory when
*** building gcc. Please change the environment variable
*** and run configure again.])
fi
# Check for additional parameters
+AC_SUBST(F95_LIBS)
+
+AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH Specify directory for the GMP library])
+
+LIBS_temp=$LIBS
+
+if test "x$with_gmp_dir" != x -a -d "$with_gmp_dir"; then
+ CPPFLAGS="$CPPFLAGS -I$with_gmp_dir"
+ F95_LIBS="$with_gmp_dir/.libs/libgmp.a"
+ LIBS="$with_gmp_dir/.libs/libgmp.a $LIBS"
+fi
+
+AC_FUNC_ALLOCA([AC_MSG_ERROR([alloca not found])])
+
+AC_CHECK_HEADER(gmp.h, [], [AC_MSG_ERROR([gmp.h not found])])
+
+AC_MSG_CHECKING([for correct version of gmp.h])
+AC_TRY_COMPILE([#include "gmp.h"],[
+#if __GNU_MP_VERSION < 3
+ choke me
+#endif
+], [AC_MSG_RESULT([yes])],
+ [AC_MSG_ERROR([gmp version 3.0 or later is required])])
+
+AC_MSG_CHECKING([for mpf_init in -lgmp])
+
+
+AC_TRY_LINK([#include <gmp.h>], [mpf_t n; mpf_init(n);],
+ [AC_MSG_RESULT([yes])], [AC_MSG_ERROR([could not link with libgmp])])
+
+LIBS=$LIBS_temp
# With GNU ld
AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld arrange to work with GNU ld.],
gnu_ld_flag="$with_gnu_ld",
gnu_ld_flag=no)
# With pre-defined ld
AC_ARG_WITH(ld,
[ --with-ld arrange to use the specified ld (full pathname)],
DEFAULT_LINKER="$with_ld")
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test ! -x "$DEFAULT_LINKER"; then
AC_MSG_WARN([cannot execute: $DEFAULT_LINKER: check --with-ld or env. var. DEFAULT_LINKER])
elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
Something went wrong with that request. Please try again.