[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.0+ (alarm@alarm) (gcc version 5.3.0 (GCC) ) #3 SMP Thu Feb 18 01:28:50 CST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Udoo i.MX6 Quad Board [ 0.000000] cma: Reserved 256 MiB at 0x40000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat 80acf340, node_mem_map af778000 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 12 pages/cpu @af72b000 s18944 r8192 d22016 u49152 [ 0.000000] pcpu-alloc: s18944 r8192 d22016 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttymxc1,115200,115200 root=/dev/mmcblk0p1 rw rootwait fbmem=24M video=mxcfb0:dev=ldb,LDB-WXGA,if=RGB24,bpp=32 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 765064K/1048576K available (7761K kernel code, 368K rwdata, 2508K rodata, 400K init, 448K bss, 21368K reserved, 262144K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc0800000 - 0xff800000 (1008 MB) lowmem : 0x80000000 - 0xc0000000 (1024 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x80a0f690 (10270 kB) .init : 0x80a10000 - 0x80a74000 ( 400 kB) .data : 0x80a74000 - 0x80ad03e0 ( 369 kB) .bss : 0x80ad03e0 - 0x80b405bc ( 449 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000020] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.000946] Console: colour dummy device 80x30 [ 0.099654] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.099666] pid_max: default: 32768 minimum: 301 [ 0.099755] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.099765] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.100284] Initializing cgroup subsys net_cls [ 0.100298] Initializing cgroup subsys pids [ 0.100317] CPU: Testing write buffer coherency: ok [ 0.100579] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.100659] Setting up static identity map for 0x10008280 - 0x100082d8 [ 0.102081] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.102683] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.103278] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.103340] Brought up 4 CPUs [ 0.103353] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.103358] CPU: All CPU(s) started in SVC mode. [ 0.103812] devtmpfs: initialized [ 0.112103] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.112429] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.125533] pinctrl core: initialized pinctrl subsystem [ 0.126455] NET: Registered protocol family 16 [ 0.128688] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.149679] cpuidle: using governor ladder [ 0.179676] cpuidle: using governor menu [ 0.179858] CPU identified as i.MX6Q, silicon rev 1.2 [ 0.200537] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.200545] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.200785] imx6q-pinctrl 20e0000.iomuxc: no fsl,pins property in node /soc/aips-bus@02000000/iomuxc@020e0000/imx6q-udoo/pwm4grp [ 0.200797] imx6q-pinctrl 20e0000.iomuxc: no fsl,pins property in node /soc/aips-bus@02000000/iomuxc@020e0000/imx6q-udoo/pwm3grp [ 0.201075] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.242100] mxs-dma 110000.dma-apbh: initialized [ 0.244856] vgaarb: loaded [ 0.245658] SCSI subsystem initialized [ 0.245830] libata version 3.00 loaded. [ 0.246084] usbcore: registered new interface driver usbfs [ 0.246140] usbcore: registered new interface driver hub [ 0.246224] usbcore: registered new device driver usb [ 0.246382] 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator [ 0.246464] 2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator [ 0.247263] i2c i2c-0: IMX I2C adapter registered [ 0.247276] i2c i2c-0: can't use DMA [ 0.247736] i2c i2c-1: IMX I2C adapter registered [ 0.247748] i2c i2c-1: can't use DMA [ 0.248312] i2c i2c-2: IMX I2C adapter registered [ 0.248324] i2c i2c-2: can't use DMA [ 0.248458] media: Linux media interface: v0.10 [ 0.248515] Linux video capture interface: v2.00 [ 0.248606] pps_core: LinuxPPS API ver. 1 registered [ 0.248611] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.248635] PTP clock support registered [ 0.259727] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) [ 0.279720] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) [ 0.280577] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed [ 0.280587] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a [ 0.280666] MIPI CSI2 driver module loaded [ 0.280806] Advanced Linux Sound Architecture Driver Initialized. [ 0.282597] clocksource: Switched to clocksource mxc_timer1 [ 0.282911] FS-Cache: Loaded [ 0.283083] CacheFiles: Loaded [ 0.292287] NET: Registered protocol family 2 [ 0.292842] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.292925] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.293044] TCP: Hash tables configured (established 8192 bind 8192) [ 0.293121] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.293169] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.293367] NET: Registered protocol family 1 [ 0.293650] RPC: Registered named UNIX socket transport module. [ 0.293656] RPC: Registered udp transport module. [ 0.293660] RPC: Registered tcp transport module. [ 0.293665] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.293692] PCI: CLS 0 bytes, default 64 [ 0.296476] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.296809] Initialise system trusted keyring [ 0.301827] zbud: loaded [ 0.302201] VFS: Disk quotas dquot_6.6.0 [ 0.302360] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.303546] FS-Cache: Netfs 'nfs' registered for caching [ 0.303858] NFS: Registering the id_resolver key type [ 0.303887] Key type id_resolver registered [ 0.303892] Key type id_legacy registered [ 0.303915] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.304145] fuse init (API version 7.23) [ 0.305016] ceph: loaded (mds proto 32) [ 0.310976] Key type asymmetric registered [ 0.311017] io scheduler noop registered [ 0.311030] io scheduler deadline registered [ 0.311072] io scheduler cfq registered (default) [ 0.311710] imx-weim 21b8000.weim: Driver registered. [ 0.314429] MIPI DSI driver module loaded [ 0.315390] mxc_sdc_fb fb@0: registered mxc display driver ldb [ 0.342692] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) [ 0.434042] Console: switching to colour frame buffer device 170x48 [ 0.490718] ldb 2000000.aips-bus:ldb@020e0008: LVDS channel1 is not online [ 0.490728] mxc_sdc_fb fb@1: NO mxc display driver found! [ 0.491418] imx-sdma 20ec000.sdma: no iram assigned, using external mem [ 0.491847] imx-sdma 20ec000.sdma: loaded firmware 1.1 [ 0.653134] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 296, base_baud = 5000000) is a IMX [ 1.255917] console [ttymxc1] enabled [ 1.258900] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 297, base_baud = 5000000) is a IMX [ 1.267117] [drm] Initialized drm 1.1.0 20060810 [ 1.279657] brd: module loaded [ 1.287121] loop: module loaded [ 1.289380] [bossac] Registering IRQ 206 for BOSSAC Arduino erase/reset operation [ 1.295807] [bossac] Created device file /dev/udoo_ard [ 1.300613] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 1.307260] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 1.313983] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 1.320863] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 1.330072] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 1.335776] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.343283] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 1.352418] scsi host0: ahci-imx [ 1.354649] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 307 [ 1.362264] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 1.369377] tun: Universal TUN/TAP device driver, 1.6 [ 1.373150] tun: (C) 1999-2004 Max Krasnyansky [ 1.378220] vcan: Virtual CAN interface driver [ 1.381372] CAN device driver interface [ 1.384805] flexcan 2090000.flexcan: device registered (reg_base=c0ac8000, irq=30) [ 1.391951] 2188000.ethernet supply phy not found, using dummy regulator [ 1.397738] pps pps0: new PPS source ptp0 [ 1.401144] fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00 [ 1.409792] fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: fa:0e:b0:5c:aa:2c [ 1.422436] libphy: fec_enet_mii_bus: probed [ 1.425881] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.430784] mac80211_hwsim: initializing netlink [ 1.434526] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 1.435132] ieee80211 phy0: hwaddr 02:00:00:00:00:00 registered [ 1.435477] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 1.436090] ieee80211 phy1: hwaddr 02:00:00:00:01:00 registered [ 1.436544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.441777] ehci-pci: EHCI PCI platform driver [ 1.445020] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.449213] usbcore: registered new interface driver usb-storage [ 1.463315] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.466917] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.492631] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.497468] hub 1-0:1.0: USB hub found [ 1.499948] hub 1-0:1.0: 1 port detected [ 1.503603] mousedev: PS/2 mouse device common for all mice [ 1.509405] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0 [ 1.516944] i2c /dev entries driver [ 1.520313] IR NEC protocol handler initialized [ 1.523600] IR RC5(x/sz) protocol handler initialized [ 1.527354] IR RC6 protocol handler initialized [ 1.530585] IR JVC protocol handler initialized [ 1.533831] IR Sony protocol handler initialized [ 1.537150] IR SANYO protocol handler initialized [ 1.540555] IR Sharp protocol handler initialized [ 1.543975] IR MCE Keyboard/mouse protocol handler initialized [ 1.548509] IR XMP protocol handler initialized [ 1.553371] mxc_v4l2_output v4l2_out: V4L2 device registered as video16 [ 1.558827] mxc_v4l2_output v4l2_out: V4L2 device registered as video17 [ 1.564443] usbcore: registered new interface driver usbtv [ 1.568634] Driver for 1-wire Dallas network protocol. [ 1.573638] [UDOO power-off] Probed UDOO Quad/Dual. [ 1.578170] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.583020] device-mapper: uevent: version 1.0.3 [ 1.586605] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.593944] sdhci: Secure Digital Host Controller Interface driver [ 1.598822] sdhci: Copyright(c) Pierre Ossman [ 1.601881] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.607011] /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified [ 1.612872] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.620934] sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found [ 1.625833] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 1.672625] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.679286] 130000.gpu supply pu not found, using dummy regulator [ 1.684340] Galcore version 5.0.11.33433 [ 1.692716] ata1: SATA link down (SStatus 0 SControl 300) [ 1.696885] ahci-imx 2200000.sata: no device found, disabling link. [ 1.701857] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 1.747580] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.760838] mmc0: new high speed SDHC card at address 0001 [ 1.766011] mmcblk0: mmc0:0001 00000 14.9 GiB [ 1.770915] mmcblk0: p1 [ 2.051189] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed [ 2.058594] mxc_vpu 2040000.vpu: VPU initialized [ 2.062422] mxc_hdmi_cec soc:hdmi_cec@00120000: HDMI CEC initialized [ 2.068809] caam 2100000.caam: Entropy delay = 3200 [ 2.102631] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 2.133170] caam 2100000.caam: Instantiated RNG4 SH0 [ 2.193932] caam 2100000.caam: Instantiated RNG4 SH1 [ 2.197698] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 2.202857] caam 2100000.caam: job rings = 2, qi = 0 [ 2.211122] caam algorithms registered in /proc/crypto [ 2.220429] caam_jr 2101000.jr0: registering rng-caam [ 2.224427] usbcore: registered new interface driver usbhid [ 2.228698] usbhid: USB HID core driver [ 2.234205] fsl-asrc 2034000.asrc: driver registered [ 2.240113] nf_conntrack version 0.5.0 (16050 buckets, 64200 max) [ 2.245585] arp_tables: (C) 2002 David S. Miller [ 2.249543] NET: Registered protocol family 10 [ 2.253854] hub 1-1:1.0: USB hub found [ 2.253892] sit: IPv6 over IPv4 tunneling driver [ 2.254520] NET: Registered protocol family 17 [ 2.254570] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.254601] Bridge firewalling registered [ 2.254612] Ebtables v2.0 registered [ 2.254619] can: controller area network core (rev 20120528 abi 9) [ 2.254675] NET: Registered protocol family 29 [ 2.254699] can: raw protocol (rev 20120528) [ 2.254708] can: broadcast manager protocol (rev 20120528 t) [ 2.254721] can: netlink gateway (rev 20130117) max_hops=1 [ 2.254915] 8021q: 802.1Q VLAN Support v1.8 [ 2.254982] Key type dns_resolver registered [ 2.254993] Key type ceph registered [ 2.255244] libceph: loaded (mon/osd proto 15/24) [ 2.262836] Registering SWP/SWPB emulation handler [ 2.263299] Loading compiled-in X.509 certificates [ 2.263371] zswap: loaded using pool lzo/zbud [ 2.264408] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 2.274113] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 2.274393] usb_otg_vbus: disabling [ 2.274397] 8962-SUPPLY: disabling [ 2.274400] sensor-SUPPLY: disabling [ 2.274405] 2P8V: disabling [ 2.274629] ALSA device list: [ 2.274630] No soundcards found. [ 2.350182] hub 1-1:1.0: 4 ports detected [ 2.362514] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 2.390859] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.397710] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 2.410179] devtmpfs: mounted [ 2.412126] Freeing unused kernel memory: 400K (80a10000 - 80a74000) [ 2.632635] usb 1-1.1: new full-speed USB device number 3 using ci_hdrc [ 2.808826] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.816726] random: systemd urandom read with 9 bits of entropy available [ 2.840851] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.857947] systemd[1]: Detected architecture arm. [ 2.862638] usb 1-1.3: new high-speed USB device number 4 using ci_hdrc [ 2.893489] systemd[1]: Set hostname to . [ 3.338271] systemd[1]: btkbd.service: Cannot add dependency job, ignoring: Unit debus-org.bluez.service failed to load: No such file or directory. [ 3.350391] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 3.365747] systemd[1]: Reached target Swap. [ 3.382852] systemd[1]: Listening on udev Kernel Socket. [ 3.402714] systemd[1]: Reached target Encrypted Volumes. [ 3.443691] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.472888] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.492729] systemd[1]: Reached target Remote File Systems. [ 3.512857] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.542820] systemd[1]: Listening on udev Control Socket. [ 3.563226] systemd[1]: Created slice User and Session Slice. [ 3.582816] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.612875] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.642835] systemd[1]: Listening on Journal Socket. [ 3.662828] systemd[1]: Listening on LVM2 metadata daemon socket. [ 3.682720] systemd[1]: Reached target Paths. [ 3.702925] systemd[1]: Listening on Network Service Netlink Socket. [ 3.722803] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.743054] systemd[1]: Created slice System Slice. [ 3.812861] systemd[1]: Mounting Temporary Directory... [ 3.844725] systemd[1]: Mounting FUSE Control File System... [ 3.864556] systemd[1]: Created slice system-getty.slice. [ 3.923097] systemd[1]: Starting Apply Kernel Variables... [ 3.942785] systemd[1]: Reached target Slices. [ 3.965047] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3.995058] systemd[1]: Starting Journal Service... [ 4.013305] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.073066] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.094894] systemd[1]: Starting Setup Virtual Console... [ 4.117403] systemd[1]: Mounted FUSE Control File System. [ 4.142830] systemd[1]: Mounted Temporary Directory. [ 4.164162] systemd[1]: Started Apply Kernel Variables. [ 4.193499] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 4.223521] systemd[1]: Started Remount Root and Kernel File Systems. [ 4.253443] systemd[1]: Started Setup Virtual Console. [ 4.623175] systemd[1]: Starting udev Coldplug all Devices... [ 4.644786] systemd[1]: Starting Load/Save Random Seed... [ 4.665471] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.724986] systemd[1]: Started Load/Save Random Seed. [ 4.881511] systemd[1]: Started Create Static Device Nodes in /dev. [ 4.943494] systemd[1]: Starting udev Kernel Device Manager... [ 4.962825] systemd[1]: Reached target Local File Systems (Pre). [ 4.983038] systemd[1]: Reached target Local File Systems. [ 5.110903] systemd[1]: Started udev Kernel Device Manager. [ 5.149901] systemd[1]: Started udev Coldplug all Devices. [ 5.194242] systemd[1]: Started Journal Service. [ 5.215541] backlight supply power not found, using dummy regulator [ 5.221851] /backlight: arguments longer than property [ 5.225767] of_pwm_get(): can't parse "pwms" property [ 5.229538] pwm-backlight backlight: unable to request PWM [ 5.234161] pwm-backlight: probe of backlight failed with error -22 [ 5.304780] systemd-journald[235]: Received request to flush runtime journal from PID 1 [ 6.015007] fsl-hdmi-dai soc:hdmi_audio@00120000: failed to probe. Load HDMI-video first. [ 6.021907] fsl-hdmi-dai: probe of soc:hdmi_audio@00120000 failed with error -12 [ 6.125382] imx-ac97-vt1613 sound: ASoC: CODEC DAI vt1613-hifi-analog not registered [ 6.131837] imx-ac97-vt1613 sound: snd_soc_register_card() failed: -517 [ 6.138312] imx-audio-hdmi sound-hdmi: initialize HDMI-audio failed. load HDMI-video first! [ 6.203044] VT1613 SoC Audio Codec [ID = 5649 - 4123] [ 6.208626] imx-ac97-vt1613 sound: vt1613-hifi-analog <-> 2028000.ssi mapping ok [ 6.242866] ov5640_read_reg:write reg error:reg=300a [ 6.246534] camera ov5640_mipi is not found [ 6.448160] ERROR: v4l2 capture: slave not found! [ 6.453856] ERROR: v4l2 capture: slave not found! [ 6.722626] usb 1-1.3: reset high-speed USB device number 4 using ci_hdrc [ 6.863673] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 6.910172] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5370 detected [ 6.916553] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 6.917888] usbcore: registered new interface driver rt2800usb [ 7.733350] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:06, irq=-1) [ 7.743390] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.378472] random: nonblocking pool is initialized