Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP

Compare: Home

Showing with 1 addition and 1 deletion.
  1. +1 −1  Home.md
2  Home.md
View
@@ -15,7 +15,7 @@ If using Windows I suggest creating the hardware directory inside your sketchboo
The Minimus comes with a DFU bootloader installed. This is fine for "native" avr-c development, but does not play well with the Arduino IDE. To install the Arduino bootloader you will need an ISP programmer (e.g. and AVRISP mkII or [Clone based on a Minimus](http://www.makestuff.eu/wordpress/minimus-avr-isp-clone/) or an Arduino running the ArduinoISP sketch). See below for the correct connections. Once connected fire up the Arduino IDE, ensure the correct board and programmer are selected, and click Tools/Burn Bootloader.
-This only needs to be done once. The device should now appear as a serial port lite other Arduino boards. A flashing red LED indicates the bootloader is running. Windows users may need to install the Arduino Leonardo drivers.
+This only needs to be done once. The device should now appear as a serial port lite other Arduino boards. A glowing red LED indicates the bootloader is running. Windows users may need to install the Arduino Leonardo drivers.
# Limitations
Something went wrong with that request. Please try again.