Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP

Compare: Home

Showing with 4 additions and 16 deletions.
  1. +4 −16 Home.md
View
20 Home.md
@@ -27,19 +27,7 @@ PWM (analogWrite) support is incomplete.
# PinOuts
-Pins are numbered 0-23 anticlockwise starting from the USB connector. Special pins are as follows:
-
-<table>
-<tr><th>Pin</th><th>Function</th></tr>
-<tr><td>3</td><td>Serial1 RX</td></tr>
-<tr><td>4</td><td>Serial1 TX</td></tr>
-<tr><td>6</td><td>LED B (Blue, Active low)</td></tr>
-<tr><td>7*</td><td>LED A (Red, USB)</td></tr>
-<tr><td>8</td><td>HWB</td></tr>
-<tr><td>10</td><td>SCK</td></tr>
-<tr><td>11*</td><td>Ground</td></tr>
-<tr><td>12</td><td>MOSI</td></tr>
-<tr><td>13</td><td>MISO</td></tr>
-<tr><td>20*</td><td>Reset</td></tr>
-<tr><td>23*</td><td>Vcc</td></tr>
-</table>
+Pins are numbered 0-23 anticlockwise starting from the USB connector, as in the diagram below.
+Pins 7 (USB LED), 11 (Ground), 20 (Reset) and 23 (Vcc) are not accessible from Arduino sketches.
+
+![Pin Diagram](http://nowt.org/minimus_pinout.png)
Something went wrong with that request. Please try again.