SysInstaller_en_GB.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0">
<context>
    <name>Installer</name>
    <message>
        <source>Switch between US layout and user selected layout</source>
        <translation>Switch between US layout and user selected layout</translation>
    </message>
    <message>
        <source>Ab&amp;ort</source>
        <translation>Ab&amp;ort</translation>
    </message>
    <message>
        <source>&amp;Back</source>
        <translation>&amp;Back</translation>
    </message>
    <message>
        <source>&amp;Next</source>
        <translation>&amp;Next</translation>
    </message>
    <message>
        <source>Welcome to PC-BSD! Please select your language and click next to continue.</source>
        <translation>Welcome to PC-BSD! Please select your language and click next to continue.</translation>
    </message>
    <message>
        <source>&amp;Customize</source>
        <translation>&amp;Customize</translation>
    </message>
    <message>
        <source>Summary</source>
        <translation>Summary</translation>
    </message>
    <message>
        <source>Disk Selection</source>
        <translation>Disk Selection</translation>
    </message>
    <message>
        <source>Installation</source>
        <translation>Installation</translation>
    </message>
    <message>
        <source>Your system is now being installed! This process may take a while, depending upon the installation options chosen, and system speed. You will be notified when the installation is finished.</source>
        <translation>Your system is now being installed! This process may take a while, depending upon the installation options chosen, and system speed. You will be notified when the installation is finished.</translation>
    </message>
    <message>
        <source>Installing to file-system mounted at /mnt</source>
        <translation>Installing to file-system mounted at /mnt</translation>
    </message>
    <message>
        <source>The disk will be setup with the following configuration:</source>
        <translation>The disk will be setup with the following configuration:</translation>
    </message>
    <message>
        <source>Disk:</source>
        <translation>Disk:</translation>
    </message>
    <message>
        <source>Mirroring:</source>
        <translation>Mirroring:</translation>
    </message>
    <message>
        <source>Partition:</source>
        <translation>Partition:</translation>
    </message>
    <message>
        <source>FileSystem:</source>
        <translation>FileSystem:</translation>
    </message>
    <message>
        <source>Size:</source>
        <translation>Size:</translation>
    </message>
    <message>
        <source>Mount:</source>
        <translation>Mount:</translation>
    </message>
    <message>
        <source>The following meta-pkgs will be installed:</source>
        <translation>The following meta-pkgs will be installed:</translation>
    </message>
    <message>
        <source>PC-BSD Installer</source>
        <translation>PC-BSD Installer</translation>
    </message>
    <message>
        <source>Start the installation now?</source>
        <translation>Start the installation now?</translation>
    </message>
    <message>
        <source>Are you sure you want to abort this installation?</source>
        <translation>Are you sure you want to abort this installation?</translation>
    </message>
    <message>
        <source>Failed!</source>
        <translation>Failed!</translation>
    </message>
    <message>
        <source>The installer has encountered an error and has been halted.</source>
        <translation>The installer has encountered an error and has been halted.</translation>
    </message>
    <message>
        <source>Do you want to generate an error report?</source>
        <translation>Do you want to generate an error report?</translation>
    </message>
    <message>
        <source>Restart the system now?</source>
        <translation>Restart the system now?</translation>
    </message>
    <message>
        <source>Installing system... This may take a while...</source>
        <translation>Installing system... This may take a while...</translation>
    </message>
    <message>
        <source>Options:</source>
        <translation>Options:</translation>
    </message>
    <message>
        <source>&amp;Finish</source>
        <translation>&amp;Finish</translation>
    </message>
    <message>
        <source>ZFS Datasets:&lt;br&gt;</source>
        <translation>ZFS Datasets:&lt;br&gt;</translation>
    </message>
    <message>
        <source>Display hardware compatibility diagnostic</source>
        <translation>Display hardware compatibility diagnostic</translation>
    </message>
    <message>
        <source>System Selection</source>
        <translation>System Selection</translation>
    </message>
    <message>
        <source>Installing packages... This may take a while...</source>
        <translation>Installing packages... This may take a while...</translation>
    </message>
    <message>
        <source>Change the installation language</source>
        <translation>Change the installation language</translation>
    </message>
    <message>
        <source>Customize the selected system</source>
        <translation>Customize the selected system</translation>
    </message>
    <message>
        <source>Display help for the current screen</source>
        <translation>Display help for the current screen</translation>
    </message>
    <message>
        <source>Launch the on-screen keyboard</source>
        <translation>Launch the on-screen keyboard</translation>
    </message>
    <message>
        <source>Cancel the installation</source>
        <translation>Cancel the installation</translation>
    </message>
    <message>
        <source>TrueOS Package Selection</source>
        <translation>TrueOS Package Selection</translation>
    </message>
    <message>
        <source>PC-BSD Package Selection</source>
        <translation>PC-BSD Package Selection</translation>
    </message>
    <message>
        <source>Your system is now installed!
 Click Finish to reboot. After rebooting you may eject the install media.</source>
        <translation>Your system is now installed!
 Click Finish to reboot. After rebooting you may eject the install media.</translation>
    </message>
    <message>
        <source>Extracting system...</source>
        <translation>Extracting system...</translation>
    </message>
    <message>
        <source>Unable to detect any disk drives! The install will now exit.</source>
        <translation>Unable to detect any disk drives! The install will now exit.</translation>
    </message>
    <message>
        <source>Unable to suggest a partition for the detected disk.</source>
        <translation>Unable to suggest a partition for the detected disk.</translation>
    </message>
    <message>
        <source>Detected that you are running the 32bit version. If your system is 64bit capable (most systems made after 2005), you really should be running the 64bit version</source>
        <translation>Detected that you are running the 32bit version. If your system is 64bit capable (most systems made after 2005), you really should be running the 64bit version</translation>
    </message>
    <message>
        <source>The selected disk / partition is less than recommended %1GB. The installation may fail...</source>
        <translation>The selected disk / partition is less than recommended %1GB. The installation may fail...</translation>
    </message>
    <message>
        <source>Load installation config file from USB stick</source>
        <translation>Load installation config file from USB stick</translation>
    </message>
    <message>
        <source>Desktop (PC-BSD)</source>
        <translation>Desktop (PC-BSD)</translation>
    </message>
    <message>
        <source>Server (TrueOS)</source>
        <translation>Server (TrueOS)</translation>
    </message>
    <message>
        <source>This will save your installation configuration to a MSDOSFS/FAT32 formatted USB stick. Continue?</source>
        <translation>This will save your installation configuration to a MSDOSFS/FAT32 formatted USB stick. Continue?</translation>
    </message>
    <message>
        <source>Please insert a USB stick now, and click OK to continue.</source>
        <translation>Please insert a USB stick now, and click OK to continue.</translation>
    </message>
    <message>
        <source>Please enter the nickname you want to save this configuration as.</source>
        <translation>Please enter the nickname you want to save this configuration as.</translation>
    </message>
    <message>
        <source>Failed saving config to USB media. Is the device working and formatted MSDOSFS/FAT32?</source>
        <translation>Failed saving config to USB media. Is the device working and formatted MSDOSFS/FAT32?</translation>
    </message>
    <message>
        <source>Configuration saved! You may now safely remove the USB media.</source>
        <translation>Configuration saved! You may now safely remove the USB media.</translation>
    </message>
    <message>
        <source>This will load a installation configuration file your MSDOSFS/FAT32 formatted USB stick. Continue?</source>
        <translation>This will load a installation configuration file your MSDOSFS/FAT32 formatted USB stick. Continue?</translation>
    </message>
    <message>
        <source>Please insert the USB stick now, and click OK to continue.</source>
        <translation>Please insert the USB stick now, and click OK to continue.</translation>
    </message>
    <message>
        <source>Failed loading saved config file from the USB media. Is the device working and formatted MSDOSFS/FAT32?</source>
        <translation>Failed loading saved config file from the USB media. Is the device working and formatted MSDOSFS/FAT32?</translation>
    </message>
    <message>
        <source>Configuration loaded! You may now safely remove the USB media.</source>
        <translation>Configuration loaded! You may now safely remove the USB media.</translation>
    </message>
    <message>
        <source>Config File:</source>
        <translation>Config File:</translation>
    </message>
    <message>
        <source>Start the install using this config file?</source>
        <translation>Start the install using this config file?</translation>
    </message>
    <message>
        <source>Restore from Life-Preserver backup</source>
        <translation>Restore from Life-Preserver backup</translation>
    </message>
    <message>
        <source>Manage network connectivity</source>
        <translation>Manage network connectivity</translation>
    </message>
    <message>
        <source>ZFS Datasets:</source>
        <translation>ZFS Datasets:</translation>
    </message>
    <message>
        <source>The original ZFS layout will be restored</source>
        <translation>The original ZFS layout will be restored</translation>
    </message>
    <message>
        <source>Performing a restore from a Life-Preserver backup. Click next to start the restore wizard.</source>
        <translation>Performing a restore from a Life-Preserver backup. Click next to start the restore wizard.</translation>
    </message>
    <message>
        <source>Start the restore now?</source>
        <translation>Start the restore now?</translation>
    </message>
    <message>
        <source>Your system is now restored!
Click Finish to reboot. After rebooting you may eject the install media.</source>
        <translation>Your system is now restored!
Click Finish to reboot. After rebooting you may eject the install media.</translation>
    </message>
    <message>
        <source>System Restore</source>
        <translation>System Restore</translation>
    </message>
    <message>
        <source>Your system is now being restored, this may take a while depending upon the size of your backup and network conditions.</source>
        <translation>Your system is now being restored, this may take a while depending upon the size of your backup and network conditions.</translation>
    </message>
    <message>
        <source>Installing meta-package: %1</source>
        <translation>Installing meta-package: %1</translation>
    </message>
    <message>
        <source>Restoring system: %1</source>
        <translation>Restoring system: %1</translation>
    </message>
    <message>
        <source>&amp;Load config from USB</source>
        <translation>&amp;Load config from USB</translation>
    </message>
    <message>
        <source>&amp;Save Config to USB</source>
        <translation>&amp;Save Config to USB</translation>
    </message>
    <message>
        <source>&lt;Version&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Version:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>This screen allows you to select the language you wish to perform the install with.</source>
        <translation>This screen allows you to select the language you wish to perform the install with.</translation>
    </message>
    <message>
        <source>This screen allows you to select the type of system you wish to install. Clicking customize will allow you to change the selected packages for your system.</source>
        <translation>This screen allows you to select the type of system you wish to install. Clicking customize will allow you to change the selected packages for your system.</translation>
    </message>
    <message>
        <source>This screen will display the currently selected disk options. Clicking customize will allow you to change the target disk, file-systems and more.</source>
        <translation>This screen will display the currently selected disk options. Clicking customize will allow you to change the target disk, file-systems and more.</translation>
    </message>
    <message>
        <source>Your system is now installing! Go grab a cup of coffee and relax, the installer will notify you when it is finished.</source>
        <translation>Your system is now installing! Go grab a cup of coffee and relax, the installer will notify you when it is finished.</translation>
    </message>
    <message>
        <source>The system is now finished installing! Click Finish to reboot, and be sure to eject any install media before booting into your new system.</source>
        <translation>The system is now finished installing! Click Finish to reboot, and be sure to eject any install media before booting into your new system.</translation>
    </message>
</context>
<context>
    <name>desktopSelection</name>
    <message>
        <source>System Package Configuration</source>
        <translation>System Package Configuration</translation>
    </message>
    <message>
        <source>Available System Packages</source>
        <translation>Available System Packages</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>&amp;Save</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>&amp;Cancel</translation>
    </message>
    <message>
        <source>No Desktop</source>
        <translation>No Desktop</translation>
    </message>
    <message>
        <source>No desktops have been selected! Please choose at least one desktop to continue.</source>
        <translation>No desktops have been selected! Please choose at least one desktop to continue.</translation>
    </message>
    <message>
        <source>View Packages</source>
        <translation>View Packages</translation>
    </message>
    <message>
        <source>Package Listing for:</source>
        <translation>Package Listing for:</translation>
    </message>
    <message>
        <source>Please select the software to install. Post-install you may also add / remove software via the Package Manager (desktop) or &quot;pkg&quot; command (server).</source>
        <translation>Please select the software to install. Post-install you may also add / remove software via the Package Manager (desktop) or &quot;pkg&quot; command (server).</translation>
    </message>
</context>
<context>
    <name>dialogCheckHardware</name>
    <message>
        <source>Detected hardware devices</source>
        <translation>Detected hardware devices</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>&amp;Close</translation>
    </message>
    <message>
        <source>Video driver:</source>
        <translation>Video driver:</translation>
    </message>
    <message>
        <source>Video resolution:</source>
        <translation>Video resolution:</translation>
    </message>
    <message>
        <source>No ethernet detected</source>
        <translation>No ethernet detected</translation>
    </message>
    <message>
        <source>Ethernet device:</source>
        <translation>Ethernet device:</translation>
    </message>
    <message>
        <source>No wifi detected</source>
        <translation>No wifi detected</translation>
    </message>
    <message>
        <source>Wifi device:</source>
        <translation>Wifi device:</translation>
    </message>
    <message>
        <source>No sound detected</source>
        <translation>No sound detected</translation>
    </message>
    <message>
        <source>Sound device:</source>
        <translation>Sound device:</translation>
    </message>
</context>
<context>
    <name>dialogFSSize</name>
    <message>
        <source>Size:</source>
        <translation>Size:</translation>
    </message>
    <message>
        <source>MB</source>
        <translation>MB</translation>
    </message>
    <message>
        <source>&amp;Ok</source>
        <translation>&amp;Ok</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>&amp;Cancel</translation>
    </message>
</context>
<context>
    <name>dialogHelp</name>
    <message>
        <source>&amp;Close</source>
        <translation>&amp;Close</translation>
    </message>
</context>
<context>
    <name>dialogInfoBox</name>
    <message>
        <source>&amp;Close</source>
        <translation>&amp;Close</translation>
    </message>
</context>
<context>
    <name>widgetKeyboard</name>
    <message>
        <source>Keyboard Settings</source>
        <translation>Keyboard Settings</translation>
    </message>
    <message>
        <source>Key Layout</source>
        <translation>Key Layout</translation>
    </message>
    <message>
        <source>Variant</source>
        <translation>Variant</translation>
    </message>
    <message>
        <source>Keyboard Model</source>
        <translation>Keyboard Model</translation>
    </message>
    <message>
        <source>( you may type into the space below to test your selected settings. )</source>
        <translation>( you may type into the space below to test your selected settings. )</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation>&amp;Apply</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>&amp;Close</translation>
    </message>
</context>
<context>
    <name>wizardDisk</name>
    <message>
        <source>This wizard will walk you through the disk setup process. Please choose the setup mode you wish to use.</source>
        <translation>This wizard will walk you through the disk setup process. Please choose the setup mode you wish to use.</translation>
    </message>
    <message>
        <source>Setup Mode</source>
        <translation>Setup Mode</translation>
    </message>
    <message>
        <source>Basic (New to BSD or disk partitioning)</source>
        <translation>Basic (New to BSD or disk partitioning)</translation>
    </message>
    <message>
        <source>Advanced (Experienced with file-systems)</source>
        <translation>Advanced (Experienced with file-systems)</translation>
    </message>
    <message>
        <source>FreeBSD Experts (CLI manual mode)</source>
        <translation>FreeBSD Experts (CLI manual mode)</translation>
    </message>
    <message>
        <source>Selected Disk</source>
        <translation>Selected Disk</translation>
    </message>
    <message>
        <source>Selected Partition</source>
        <translation>Selected Partition</translation>
    </message>
    <message>
        <source>Partition disk with GPT</source>
        <translation>Partition disk with GPT</translation>
    </message>
    <message>
        <source>Below you may adjust the file-system mount points. For most users the defaults will work best. </source>
        <translation>Below you may adjust the file-system mount points. For most users the defaults will work best. </translation>
    </message>
    <message>
        <source>&amp;Add</source>
        <translation>&amp;Add</translation>
    </message>
    <message>
        <source>&amp;Remove</source>
        <translation>&amp;Remove</translation>
    </message>
    <message>
        <source>You have chosen Expert mode. In this mode you are able to launch a terminal window and use the command-line to manually partition your disk. When you are finished, make sure to mount your filesystems to /mnt to begin the installation. </source>
        <translation>You have chosen Expert mode. In this mode you are able to launch a terminal window and use the command-line to manually partition your disk. When you are finished, make sure to mount your filesystems to /mnt to begin the installation. </translation>
    </message>
    <message>
        <source>&amp;Launch terminal</source>
        <translation>&amp;Launch terminal</translation>
    </message>
    <message>
        <source>Please check the disk summary below and click finish to save your settings. </source>
        <translation>Please check the disk summary below and click finish to save your settings. </translation>
    </message>
    <message>
        <source>Use entire disk</source>
        <translation>Use entire disk</translation>
    </message>
    <message>
        <source>ZFS Mounts</source>
        <translation>ZFS Mounts</translation>
    </message>
    <message>
        <source>ZFS Options</source>
        <translation>ZFS Options</translation>
    </message>
    <message>
        <source>Resizing</source>
        <translation>Resizing</translation>
    </message>
    <message>
        <source>Remove mount-point</source>
        <translation>Remove mount-point</translation>
    </message>
    <message>
        <source>Are you sure you want to remove this mount point?</source>
        <translation>Are you sure you want to remove this mount point?</translation>
    </message>
    <message>
        <source>Enter mount-point</source>
        <translation>Enter mount-point</translation>
    </message>
    <message>
        <source>Please enter the new mount-point:</source>
        <translation>Please enter the new mount-point:</translation>
    </message>
    <message>
        <source>Editing:</source>
        <translation>Editing:</translation>
    </message>
    <message>
        <source>Installing to file-system mounted at /mnt</source>
        <translation>Installing to file-system mounted at /mnt</translation>
    </message>
    <message>
        <source>The disk will be setup with the following configuration:</source>
        <translation>The disk will be setup with the following configuration:</translation>
    </message>
    <message>
        <source>Disk:</source>
        <translation>Disk:</translation>
    </message>
    <message>
        <source>Mirroring:</source>
        <translation>Mirroring:</translation>
    </message>
    <message>
        <source>Partition:</source>
        <translation>Partition:</translation>
    </message>
    <message>
        <source>FileSystem:</source>
        <translation>FileSystem:</translation>
    </message>
    <message>
        <source>Size:</source>
        <translation>Size:</translation>
    </message>
    <message>
        <source>Mount:</source>
        <translation>Mount:</translation>
    </message>
    <message>
        <source>Enable ZFS mirror/raidz mode</source>
        <translation>Enable ZFS mirror/raidz mode</translation>
    </message>
    <message>
        <source>ZFS Virtual Device Mode</source>
        <translation>ZFS Virtual Device Mode</translation>
    </message>
    <message>
        <source>Please select at least 1 other drive for mirroring</source>
        <translation>Please select at least 1 other drive for mirroring</translation>
    </message>
    <message>
        <source>Options:</source>
        <translation>Options:</translation>
    </message>
    <message>
        <source>If this is a single disk ZFS install, you can continue, otherwise please select the mirror / raid mode and disks below. </source>
        <translation>If this is a single disk ZFS install, you can continue, otherwise please select the mirror / raid mode and disks below. </translation>
    </message>
    <message>
        <source>ZFS Datasets:&lt;br&gt;</source>
        <translation>ZFS Datasets:&lt;br&gt;</translation>
    </message>
    <message>
        <source>Invalid Mount</source>
        <translation>Invalid Mount</translation>
    </message>
    <message>
        <source>Mount point should start with &apos;/&apos;</source>
        <translation>Mount point should start with &apos;/&apos;</translation>
    </message>
    <message>
        <source>Note: Using ZFS mirror/raidz can only be enabled when doing full-disk installations</source>
        <translation>Note: Using ZFS mirror/raidz can only be enabled when doing full-disk installations</translation>
    </message>
    <message>
        <source>Please select 2 or 4 additional drives for raidz1</source>
        <translation>Please select 2 or 4 additional drives for raidz1</translation>
    </message>
    <message>
        <source>Please select 3, 5, or 9 additional drives for raidz2</source>
        <translation>Please select 3, 5, or 9 additional drives for raidz2</translation>
    </message>
    <message>
        <source>Please select 4, 6, or 10 additional drives for raidz3</source>
        <translation>Please select 4, 6, or 10 additional drives for raidz3</translation>
    </message>
    <message>
        <source>Enter SWAP size</source>
        <translation>Enter SWAP size</translation>
    </message>
    <message>
        <source>Size (MB)</source>
        <translation>Size (MB)</translation>
    </message>
    <message>
        <source>ZFS pool name</source>
        <translation>ZFS pool name</translation>
    </message>
    <message>
        <source>Force ZFS 4K block size</source>
        <translation>Force ZFS 4K block size</translation>
    </message>
    <message>
        <source>(MB)</source>
        <translation>(MB)</translation>
    </message>
    <message>
        <source>Swap Size</source>
        <translation>Swap Size</translation>
    </message>
    <message>
        <source>Please select the disk or partition you wish to install onto. Please note that you must select either an entire disk or a primary partition that is at least 20GB for a server install or 50GB for a desktop install. </source>
        <translation>Please select the disk or partition you wish to install onto. Please note that you must select either an entire disk or a primary partition that is at least 20GB for a server install or 50GB for a desktop install. </translation>
    </message>
    <message>
        <source>Installing to SSD (Disables SWAP / atime)</source>
        <translation>Installing to SSD (Disables SWAP / atime)</translation>
    </message>
    <message>
        <source>No boot-loader!</source>
        <translation>No boot-loader!</translation>
    </message>
    <message>
        <source>The original system datasets / mount-points will be automatically restored.</source>
        <translation>The original system datasets / mount-points will be automatically restored.</translation>
    </message>
    <message>
        <source>Boot-Loader (GRUB recommended)</source>
        <translation>Boot-Loader (GRUB recommended)</translation>
    </message>
    <message>
        <source>You have chosen not to install a boot-loader. You will need to manually setup your own loader.</source>
        <translation>You have chosen not to install a boot-loader. You will need to manually setup your own loader.</translation>
    </message>
</context>
<context>
    <name>wizardFreeBSD</name>
    <message>
        <source>Please enter the root password for this server</source>
        <translation>Please enter the root password for this server</translation>
    </message>
    <message>
        <source>Password</source>
        <translation>Password</translation>
    </message>
    <message>
        <source>Password (Repeat)</source>
        <translation>Password (Repeat)</translation>
    </message>
    <message>
        <source>Please create a user for this server</source>
        <translation>Please create a user for this server</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>Name</translation>
    </message>
    <message>
        <source>Username</source>
        <translation>Username</translation>
    </message>
    <message>
        <source>Default shell</source>
        <translation>Default shell</translation>
    </message>
    <message>
        <source>Please enter a system hostname and remote login preference.</source>
        <translation>Please enter a system hostname and remote login preference.</translation>
    </message>
    <message>
        <source>Hostname</source>
        <translation>Hostname</translation>
    </message>
    <message>
        <source>Enable remote SSH login</source>
        <translation>Enable remote SSH login</translation>
    </message>
    <message>
        <source>Please select a network device to configure for this system.</source>
        <translation>Please select a network device to configure for this system.</translation>
    </message>
    <message>
        <source>Network Interface</source>
        <translation>Network Interface</translation>
    </message>
    <message>
        <source>IP Address</source>
        <translation>IP Address</translation>
    </message>
    <message>
        <source>Netmask</source>
        <translation>Netmask</translation>
    </message>
    <message>
        <source>Nameserver (DNS)</source>
        <translation>Nameserver (DNS)</translation>
    </message>
    <message>
        <source>Gateway</source>
        <translation>Gateway</translation>
    </message>
    <message>
        <source>IPv6 Address</source>
        <translation>IPv6 Address</translation>
    </message>
    <message>
        <source>IPv6 Gateway</source>
        <translation>IPv6 Gateway</translation>
    </message>
    <message>
        <source>IPv6 Nameserver</source>
        <translation>IPv6 Nameserver</translation>
    </message>
    <message>
        <source>000.000.000.000; </source>
        <translation>000.000.000.000; </translation>
    </message>
    <message>
        <source>Please select any optional features to install.</source>
        <translation>Please select any optional features to install.</translation>
    </message>
    <message>
        <source>Install system sources (/usr/src)</source>
        <translation>Install system sources (/usr/src)</translation>
    </message>
    <message>
        <source>Install ports tree (/usr/ports)</source>
        <translation>Install ports tree (/usr/ports)</translation>
    </message>
    <message>
        <source>This wizard will walk you though the setup of your new server. Click next to begin. </source>
        <translation>This wizard will walk you though the setup of your new server. Click next to begin. </translation>
    </message>
</context>
<context>
    <name>wizardRestore</name>
    <message>
        <source>This wizard will walk you though the process of restoring your system from a Life-Preserver backup. Click next to begin. </source>
        <translation>This wizard will walk you though the process of restoring your system from a Life-Preserver backup. Click next to begin. </translation>
    </message>
    <message>
        <source>To get started please enter the hostname, username and port of your backup server.</source>
        <translation>To get started please enter the hostname, username and port of your backup server.</translation>
    </message>
    <message>
        <source>Backup Server</source>
        <translation>Backup Server</translation>
    </message>
    <message>
        <source>Host Name</source>
        <translation>Host Name</translation>
    </message>
    <message>
        <source>User Name</source>
        <translation>User Name</translation>
    </message>
    <message>
        <source>SSH Port</source>
        <translation>SSH Port</translation>
    </message>
    <message>
        <source>Server Authentication</source>
        <translation>Server Authentication</translation>
    </message>
    <message>
        <source>Use USB key</source>
        <translation>Use USB key</translation>
    </message>
    <message>
        <source>Use password authentication</source>
        <translation>Use password authentication</translation>
    </message>
    <message>
        <source>The following systems are backed up on this server, select the one you wish to restore. </source>
        <translation>The following systems are backed up on this server, select the one you wish to restore. </translation>
    </message>
    <message>
        <source>Restore System Selection</source>
        <translation>Restore System Selection</translation>
    </message>
    <message>
        <source>Restore Summary</source>
        <translation>Restore Summary</translation>
    </message>
    <message>
        <source>The system is ready to be restored, click Finish to continue.</source>
        <translation>The system is ready to be restored, click Finish to continue.</translation>
    </message>
    <message>
        <source>No keys found!</source>
        <translation>No keys found!</translation>
    </message>
    <message>
        <source>No Auth keys could be found on that memory stick!
Please try another USB stick or use password authentication.</source>
        <translation>No Auth keys could be found on that memory stick!
Please try another USB stick or use password authentication.</translation>
    </message>
    <message>
        <source>Connection failed!</source>
        <translation>Connection failed!</translation>
    </message>
    <message>
        <source>Could not connect to the backup server!
Please check that the server is reachable and verify your user/password.</source>
        <translation>Could not connect to the backup server!
Please check that the server is reachable and verify your user/password.</translation>
    </message>
    <message>
        <source>Could not connect to the backup server!
Please check your hostname and that the backup server is reachable.</source>
        <translation>Could not connect to the backup server!
Please check your hostname and that the backup server is reachable.</translation>
    </message>
    <message>
        <source>Will restore from:</source>
        <translation>Will restore from:</translation>
    </message>
    <message>
        <source>Select the SSH key to use</source>
        <translation>Select the SSH key to use</translation>
    </message>
    <message>
        <source>Key File:</source>
        <translation>Key File:</translation>
    </message>
    <message>
        <source>If you saved your Life-Preserver key onto a USB drive, insert it now and select USB key, otherwise you may wish to use password authentication.</source>
        <translation>If you saved your Life-Preserver key onto a USB drive, insert it now and select USB key, otherwise you may wish to use password authentication.</translation>
    </message>
</context>
</TS>