Permalink
Fetching contributors…
Cannot retrieve contributors at this time
88 lines (72 sloc) 3.15 KB
/*
pins_arduino.h - Pin definition functions for Arduino
Part of Arduino - http://www.arduino.cc/
Copyright (c) 2007 David A. Mellis
Modified for ESP8266 platform by Ivan Grokhotkov, 2014-2015.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General
Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
Boston, MA 02111-1307 USA
$Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
*/
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#define EXTERNAL_NUM_INTERRUPTS 16
#define NUM_DIGITAL_PINS 17
#define NUM_ANALOG_INPUTS 1
#define analogInputToDigitalPin(p) ((p > 0)?NOT_A_PIN:0)
#define digitalPinToInterrupt(p) (((p) < EXTERNAL_NUM_INTERRUPTS)?p:NOT_A_PIN)
#define digitalPinHasPWM(p) (((p) < NUM_DIGITAL_PINS)?p:NOT_A_PIN)
static const uint8_t SDA = 4;
static const uint8_t SCL = 5;
static const uint8_t SS = 15;
static const uint8_t MOSI = 13;
static const uint8_t MISO = 12;
static const uint8_t SCK = 14;
static const uint8_t LED_BUILTIN = 2;//new ESP-12E GPIO2
static const uint8_t BUILTIN_LED = 2;//new ESP-12E GPIO2
static const uint8_t A0 = 17;
static const uint8_t D0 = 3;
static const uint8_t D1 = 1;
static const uint8_t D2 = 16;
static const uint8_t D3 = 5;
static const uint8_t D4 = 4;
static const uint8_t D5 = 14;
static const uint8_t D6 = 12;
static const uint8_t D7 = 13;
static const uint8_t D8 = 0;
static const uint8_t D9 = 2;
static const uint8_t D10 = 15;
static const uint8_t D11 = 13;
static const uint8_t D12 = 12;
static const uint8_t D13 = 14;
static const uint8_t D14 = 4;
static const uint8_t D15 = 5;
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_USBVIRTUAL Serial
#define SERIAL_PORT_HARDWARE Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif /* Pins_Arduino_h */