pfSense Installation Guide
Plug the USB stick prepared earlier to apu and boot from it.
Only for BIOS v4.6.7 or older, when main installer menu pops up do the following:
Interrupt the installer by pressing
ESCand type following commands:
set hint.ahci.0.msi="0" boot
BIOS versions v4.6.7 and older need to have MSI disabled, due to signal races causing disk write commands timeouts.
Installer should load the kernel now and begin installation process.
Proceed with the installation choosing the options that fit you.
At the end of installation, only BIOS v4.6.7 or older to prevent system hangs or reboots after few hours uptime, open the shell to customize the system:
/boot/device.hints and append