Commits on Nov 7, 2019
-
mb/google/hatch/variants/helios: Modify touchscreen power on sequence
The previous values do not affect the touchscreen function. But, the previous values cause the power leakage in S0ix. from b/142368161: 1. Modify GPP_D: The specification define T1 >= 10ms. We change it to 12ms for a safety and low impact value in our mind. Enable pin as GPP_D9 is define to be AVDD in specification. Set it to 10ms to make it to be the final one to pull low during power off sequence . 2. Add GPP_C4: If we set stop_off_delay_ms to be 1. The true T4 we got will be 300us . Set stop_off_delay_ms to be 2 . True T4 will be 500us . So we change it to 5 to be a low impact value in our mind according to the true T4 value we got . BUG=b:142368161 BRANCH=Master TEST=emerge-hatch coreboot chromeos-bootimage ./util/abuild/abuild -p none -t google/hatch -x -a Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I86c920ff1d5c0b510adde8a37f60003072d5f4e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35907 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> -
mainboard/google: Allow Hatch variants to read SPD data over SMBus
All Hatch variants so far embed static SPD data encoded within the firmware image. However we wish the flexibility for romstage implementations that allow for reading the SPD data dynamically over SMBus. This romstage variant allows for reading the SPD data over SMBus. V.2: Dispence with memcpy(). V.3: Revert back to previous patch with memcpy(). V.4: Rewrite again to avoid memcpy(). BRANCH=none BUG=b:143134702 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I3516a46b91840a9f6d1f4cffb2553d939d79cda2 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36449 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-
Includes: - gpio mappings, - overridetree.cb, - kconfig adjustments for reading spd over smbus. V.2: Rework devicetree with comments and drop some useless gpio maps. BUG=b:141658115 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I6449c4fcc1df702ed4f0d35afd7b0981e4c72323 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
-
Not all Rangeley SKUs have a fixed 100MHz BCLK. As per BIOS Writer's Guide, BCLK is available in MSR_FSB_FREQ 0xCD[1:0]. Using fixed BCLK was causing wrong values of core frequencies in _PSS table for SKUs that do not have BCLK=100MHz. Change-Id: Id8e0244fab0283b74870950cb00a95aab2a7201f Signed-off-by: Hannah Williams <hannah.williams@dell.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35348 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-
lib/cbfs: Add fallback to RO region to cbfs_boot_locate
With this change cbfs_boot_locate will check the RO (COREBOOT) region if a file can not be found in the active RW region. By doing so it is not required to duplicate static files that are not intended to be updated to the RW regions. The coreboot image can still be updated by adding the file to the RW region. This change is intended to support VBOOT on systems with a small flash device. BUG=N/A TEST=tested on facebook fbg1701 Change-Id: I81ceaf927280cef9a3f09621c796c451e9115211 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36545 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-
soc/intel/icelake: Refactor pch_early_init() code
This patch keeps required pch_early_init() function like ABASE programming, GPE and RTC init into bootblock and moves remaining functions like TCO configuration and SMBUS init into romstage/pch.c in order to maintain only required chipset programming for bootblock and verstage. TEST=Able to build and boot ICL DE system. Change-Id: I4f0914242c3215f6bf76e41c468f544361a740d8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36627 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-
soc/intel/{apl,dnv,quark}: Use strip_quotes for FSP options
The commit 8fc523e (drivers/intel/fsp2_0: Use strip_quotes for cbfs filenames) breaks the Siemens APL mainboards as FSP-M never returns once it is called. The reason for this is that the -b option is missing when adding the FSP package to cbfs via cbfstool. This patch fixes this issue. TEST=tested on siemens/mc_apl5 Change-Id: I48e5fa36e1ad799d09714f53a3041f73b8ec3550 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36645 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: David Guckian Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
