Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I4aa64de21e2e23b942e9da9a6d1568aa2686d6f3 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>

apu7 is an apu3 with different NICs (Intel i225). For now, it doesn't support iPXE network booting. Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I495879f1527643b217f9facb07dace5d70175a3e Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>

Signed-off-by: Przemyslaw Sulewski <przemyslaw.sulewski@3mdeb.com>

This patch fixes a potential corner case scenario where the value of CONFIG_DEFAULT_CONSOLE_LOGLEVEL is less than `BIOS_SPEW` hence, coreboot is unable to redirect FSP serial messages over UART. Rather than passing hard coded `BIOS_SPEW` for the FSP debug handler, this patch now calls get_log_level() function to pass the supported log level while printing FSP serial msg. BUG=b:225544587 TEST=Able to build and boot taeko. Also, able to see FSP debug log with CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8a18101f5c3004252205387bde28590c72e05b9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64460 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

Reuse existing SMBus code from southbridge/intel/common/smbus_ops.h. Change-Id: Iea4f6886bb49590f7f96abbfbe631ac9d4dda902 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64432 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

…22CE suspend To make sure Realtek RTL8822CE suspend stress test smoothly, we remove 1c.7 as wireless LAN (WLAN) connects the signal PCIE_4 and it will map to 1c.7. refer to Intel Simon comment (https://partnerissuetracker.corp.google.com/issues/230386474#comment12), as well as, remove redundant 17.0 and 1c.6 that both are described by baseboard/devicetree.cb BRANCH=dedede BUG=b:230386474 TEST=on beadrix, verified by Realtek RTL8822CE can run suspend stress test properly. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Ib418eed57f07afaa6b397b42a057808eab142f7a Reviewed-on: https://review.coreboot.org/c/coreboot/+/64212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>

Currently, the LTE pins are enabled in gpio.c, then disabled in fw_config.c if LTE is not present. However, since there's a short delay between mainboard_init() and fw_config_handle(), this means that when LTE is not present GPP_H19 (SOC_I2C_SUB_INT_ODL, used for the SAR sensor) will be floating for a short period of time. Rework the GPIO config so that the LTE pins are disabled in the baseboard, then enabled in fw_config.c for variants using LTE. However, this doesn't work for WWAN_EN and WWAN_RST_L since they need to be enabled in bootblock. So these are instead enabled in the variant gpio.c, then disabled in fw_config.c if LTE is not present. BUG=None TEST=LTE still works on nivviks Change-Id: I9d8cbdff5a0dc9bdee87ee0971bc170409d925a2 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>

AGESA has a lot of code in the .data section (initialized data). However there is no such section in CAR stages as the code runs in XIP mode and CAR is too small to contain the data section. When the linker can not match code to a section it will just append it, which is why AGESA worked at all. Follow-up patches will attempt to fix AGESA and set Kconfig parameter to 'n'. After all AGESA sources have been fixed, this can be removed. Change-Id: I311ee17e3c0bd283692194fcee63af4449583d74 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

Add 'lb_fill_pcie' function to pass PCIe information from coreboot to libpayload, and add CB_ERR_NOT_IMPLEMENTED to the cb_err enum for the __weak function. ARM platform usually does not have common address for PCIe to access the configuration space of devices. Therefore, new API is added to pass the base address of PCIe controller for payloads to access PCIe devices. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I6cdce21efc66aa441ec077e6fc1d5d1c6a9aafb0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Shelley Chen <shchen@google.com>

Remove the stop pin declaration for LAN. Confirmed with LAN vendor, 8111K do not need to implement stop pin. It caused S0ix fail. BUG=b:232327947 TEST=Build and suspend_stress_test -c 5 pass Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I9bdaa28cd879c1ea7de2de8afb25761df39bcfc8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

In order to pass PCIe base address to payloads, implement pcie_fill_lb() to fill coreboot table with PCIe info. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib2988694f60aac9cbfc09ef9a26d47e01c004406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>

Move the common APIs to pci_ops.c and IO based operations to pci_io_ops.c, and add pci_map_bus_ops.c to support bus mapping. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ie74801bd4f3de51cbb574e86cd9bb09931152554 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>

Add 'pci_map_bus' function and PCIE_MEDIATEK config for MediaTek platform. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I9ea7d111fed6b816fa2352fe93c268116519a577 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>

There are efforts to have bootflows that do not follow a traditional bootblock-romstage-postcar-ramstage model. As part of that CBMEM initialisation hooks will need to move from romstage to bootblock. The interface towards platforms and drivers will change to use one of CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called in the first stage with CBMEM available. Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>

Change-Id: I417bab99eeb7ec91fcb39d092d396580ad02ef23 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

Update the PSP header to set the SOC FW ID to 0x0149 for this platform BUG=b:217414563 TEST=Build and verify header is set correctly Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ic604ec96560c2d4d89c48c4a27528c5cfe4ca7e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>

Fix descriptors for USB ports to align with their function and placement with respect to the schematics. BUG=N/A TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: If57bebf9bffd4616c437ec655b64cab3298ac08e Reviewed-on: https://review.coreboot.org/c/coreboot/+/64530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>

The audio codec used by crota has a level-sensitive interrupt, therefore configure the GPIO pad as level-sensitive. BUG=b:230418589 TEST=emerge-brya coreboot and verified pass Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I588c21e44b9bb17cd5a48bf5f22465ec328496e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

Select EC_GOOGLE_CHROMEEC_SKUID and EC_GOOGLE_CHROMEEC_BOARDID to provide common routine for reading skudid and boardid from Chrome EC. BUG=b:229052726 TEST=emerge-skyrim coreboot chromeos-bootimage Check the corresponding directory gets mounted to /run/chromeos-config/v1 Change-Id: I6aff02d29d44e95cd9b9e9485593c81f0d4a4b0e Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>

By right if PseTsnGbeSgmiiEnable is disable, PseTsnGbePhyInterfaceType should use RGMII setting. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: If593a5534716a9e93f99cb155fb5e86e12b1df17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>

Based on quick fix on this commit 7b0fe59be (soc/intel/ehl: Fix logical bug for PseTsnGbePhyInterfaceType), disable PSE TSN SGMII as the original intention is to set the PSE TSN phy interface as RGMII. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: Id2e05b19f156621a945110791038bc0d19a0aad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>

Use defines for a better reading of the code. Change-Id: I8e696240d649c0ea2341b8f04b62eebffebc1d57 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64519 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

On some x86 targets it the bootblock is loaded via a different mechanism, like via the AMD PSP or Intel IFWI. Some payloads need that pointer so add it to cbfs. Note that on Intel APL this file is not used, which is why the bootblock still needs to contain the pointer in the ARCH_X86 part. It is not worth it to add logic to specifically deal with APL as this is a legacy feature anyway. For AMD non-car platform this fixes cbfs access in SeaBIOS. Change-Id: If46e80e3eed5cc3f59964ac58e507f927fc563c4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>

Some brya variants will use a GN20 series Nvidia GPU, which requires quite a bit of ACPI support code to be written for it. This patch lands a decent bit of the initial code for it on the brya platform, including: 1) PEG RTD3 methods 2) DGPU power operations (RTD3 and GCOFF, NVJT _DSM and other Methods) 3) NVOP _DSM method There will be more support to come later, this is all written to specifications from the Nvidia Software Design Guide for GN20. BUG=b:214581763 TEST=build patch train Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ifce1610210e9636e87dda4b55c8287334adfcc42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>

The agah variant will include an Nvidia GN20 series GPU, therefore select the INCLUDE_NVIDIA_GPU_ASL Kconfig to include the respective ASL code into the DSDT. BUG=b:214581763 TEST=build patch train Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Icc718d01506ccb4dd42841239e96926f4ddaa9c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>

The Nvidia GPU supports another function named NBCI (NoteBook Common Interface), which has some subfunctions which are required for the Nvidia kernel driver to consume. The specification for this function comes from the Nvidia GN20 Software Design Guide. BUG=b:214581763 TEST=build Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I19eb9417923d297a084d6f5329682e91cd506a9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/64008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>

The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for primus board. Please refer Intel doc#723158 for more information. BUG=b:221461379 TEST=Verify the build for primus board Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I4d7d52bdeafe8b1b55822b5c8d040c94ce1f3878 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

This patch configures external V1p05/Vnn/VnnSx rails for adlrvp-n to achieve the better power savings. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 , S0 states. * Set the supported voltage states. * Set the voltage for v1p05 and vnn. * Set the ICC max for v1p05 and vnn. Kit: 646929 - ADL N Platform Design Guide BUG=b:223102016 TEST=Verified all the UPD values are updated with these configs. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I06298eb1aec07eae34420c5736e912c707fefbc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org>

…viks This patch configures external V1p05/Vnn/VnnSx rails for Nivviks to achieve the better power savings. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 , S0 states. * Set the supported voltage states. * Set the voltage for v1p05 and vnn. * Set the ICC max for v1p05 and vnn. Kit: 646929 - ADL N Platform Design Guide BUG=b:223102016 TEST=Verified all the UPD values are updated with these configs. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: If8da0dfe3059087526f74042be3c8b7e4a7ece82 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org>

This patch configures external V1p05/Vnn/VnnSx rails for Nereid to achieve the better power savings. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 , S0 states. * Set the supported voltage states. * Set the voltage for v1p05 and vnn. * Set the ICC max for v1p05 and vnn. Kit: 646929 - ADL N Platform Design Guide BUG=b:223102016 TEST=Verified all the UPD values are updated with these configs. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I1df4ea10798354f41fe9cce0f8c478930517207c Reviewed-on: https://review.coreboot.org/c/coreboot/+/64420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org>

To make sure daughter board LTE existing, we update probe to DB ports value of FW_CONFIG field, (https://partnerissuetracker.corp.google.com/issues/226910787#comment11) as well as, refer to Google Henry and Ivan comments (https://partnerissuetracker.corp.google.com/issues/226910787#comment14) BRANCH=dedede BUG=b:226910787 TEST=on beadrix, verified by FW_NAME=beadrix emerge-dedede coreboot. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: I9ab4412b614ec665fbafc998756b805591982b65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

Enable SaGv support for crota BUG=b:229600878 TEST=FW_NAME=crota emerge-brya coreboot Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: Ibc06ef19e9fbbc91ef650a4ac060ce2b7c5c25d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>

…n fw_config If the LTE USB DB is connected, enable LTE-related settings. Otherwise, disable LTE-related settings. BUG=b:229938024, b:229048361, b:229040345 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I37719cee48370a04534067aa64a3aa77e453948a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>

…nfig BUG=b:229938024 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Ib5770f02a6d524417be6723f7f70aa80d9452f62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>

If the SPI controller is hidden from the OS (which is default on Apollo Lake) then OS has no chance to probe the device and therefore can not be aware of the resources this PCI device occupies. If the OS needs to move some resources for a reason it can happen that the new allocated window will be shadowed by the hidden PCI device resource and hence causing a conflict. As a result this MMIO window will be inaccessible from the OS which will cause issues in applications. For instance on Apollo Lake this causes flashrom to stop working. This patch adds a SSDT extension for the PCI device if it is hidden from the OS and reports the occupied resource via ACPI to the OS. For the cases where the device is hidden later at coreboot runtime and therefore is not marked as hidden in the PCI device itself a Kconfig switch called 'FAST_SPI_GENERATE_SSDT' is introduced. It defaults to 'no' and can be set from SOC code to override it. Since there is no defined ACPI ID for the fast SPI controller available now, the generic one (PNP0C02) is used. Test: Boot mc_apl4 and make sure flashrom works again. Change-Id: Ia16dfe6e001188aad26418afe0f04c53ecfd56f1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Subrata Banik <subratabanik@google.com>

Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I780e2765059ad7473fe5f33c50dd0d8a561151fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/64390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>

Add supported memory parts in mem_parts_used.txt, and generate SPD id for this part. H9JCNNNBK3MLYR-N6E BUG=b:229938024 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Ibb111cddc00a0d066ef9792d974a6e4ad263cc99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>

Hook Timer8254ClkSetting to `legacy_8254_timer` cmos option. If that isn't set, fallback to the `USE_LEGACY_8254_TIMER` Kconfig option. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4f91cc2c8f48e9da47399059386092314b631b08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>

Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I37d31598e87e5b625ded3186980e3aba7dcf6440 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

Follow google stylus spec. The Stylus-Present GPIO MUST be a wake pin that interrupts the system in active operation when the stylus is removed or inserted. BUG=b:233159811 TEST=EC wake event work as expected. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Icf609c647e19914684a93c89022f2cd4888a67ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/64538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>

EHL MAC side expects a rising edge signal for an IRQ. Based on the mainboard wiring it could be necessary to change the interrupt polarity. This patch provides the functionality to invert a falling edge signal that comes from an external PHY. The inverting can be activated via devicetree parameter. Change-Id: Ia314014c7cacbeb72629c773c8c0bb5f002a3f54 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>

There are three external Marvell PHY 88E1512 on this mainboard. The PHY IRQ comes with a falling edge but the EHL MAC side needs a rising edge signal. For that reason, we need an inversion of the IRQ polarity. Change-Id: Id3caf582b4434b046779f5733e6ad9b57528ce35 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>

The crypro device on bus A device 0 function 2 wasn't enabled, so it didn't get resources assigned resulting in this the Linux kernel error: [ 38.582036] pci 0000:04:00.2: attach allowed to drvr ccp [internal device] [ 38.582064] ccp 0000:04:00.2: enabling device (0000 -> 0002) [ 38.582175] ccp 0000:04:00.2: ioremap failed [ 38.582178] ccp 0000:04:00.2: initialization failed [ 38.582181] ccp: probe of 0000:04:00.2 failed with error -12 Enable the crypto device to fix this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia812df6e59f3767dcbaa908fa620b62619590f85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64552 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

The ACP device on bus A device 0 function 5 wasn't enabled, so it didn't get resources assigned. Enable the ACP device to fix this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifc9376314213e9d624756519f703d508411cb1bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/64553 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

The HD audio controller of the GPU on bus A device 0 function 1 wasn't enabled, so it didn't get resources assigned. Enable it to fix this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib9a4129ce594c5dd59f70e855fef5f2c04ebb9c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64554 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

On Guybrush, there wasn't a need for a sleep GPIO table. Remove the TODO and filler table and function to reduce unnecessary function calls/overhead. BUG=b:232952508 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ic51ee4845d663acf34f050f7b3abf57a7c247c88 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>

The feature request was moved to Skyrim in the interest of time and effort. The bug was updated to reflect this, and the comment should be removed from the monkey island code base BUG=b:232952508 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Id4ca43692aa56b6dba2f7acc1f924b30c1e966ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/64558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>

This patch provides the possibility for EHL based boards to disable RAPL settings via SOC_INTEL_DISABLE_POWER_LIMITS config switch. On Elkhart Lake the way via setting relevant MSR bits does not work. Therefore the way via MCHBAR is choosen. Test: Check MCHBAR mapped registers (MCH_PKG_POWER_LIMIT) on mc_ehl1. Change-Id: I5be6632b15ab8e14a21b5cd35152f82fec919d9f Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

Disable RAPL for all mainboards based on mc_ehl for stable real time mode of CPUs. Test: Boot mc_ehl1 with this patch and ensure the bits in the MCBAR register are cleared. Change-Id: Ie58a4b6444d5be088ac2b25ff0a2f5cd33120ace Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>

Currently no smihandler uses heap. coreboot's heap manager also is quite limited in what it will free (only the latest alloc). This makes it a bad idea to use it inside the smihandler, as depending on the alloc usage the heap might actually be full at some point, breaking the smihandler. This also reduces the ramstage by 448 bytes on google/vilboz. Change-Id: I70cd822be17c1efe13c94a9dbd2e1038808b9c56 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de>

Commits on Jun 21, 2022