Skip to content
Branch: master
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
..
Failed to load latest commit information.
Adafruit_CharLCD.py
IMG_20121116_220151.jpg
IMG_20121116_220205.jpg
IMG_20121116_220440.jpg
IMG_20121116_221953.jpg
README.md
lcdcmd.py
links.txt

README.md

This is a simple command line script. It accept one argument per LCD display line.

URLs

PIN Layout

Pin #1 of the LCD goes to ground (black wire)
Pin #2 of the LCD goes to +5V (red wire)
Pin #3 (Vo) connects to the middle of the potentiometer (orange wire)
Pin #4 (RS) connects to the Cobber #25 (yellow wire)
Pin #5 (RW) goes to ground (black wire)
Pin #6 (EN) connects to cobber #24 (green wire)
Skip LCD Pins #7, #8, #9 and #10
Pin #11 (D4) connects to cobber #23 (blue wire)
Pin #12 (D5) connects to cobber #17 (violet wire)
Pin #13 (D6) connects to cobber #21 (gray wire) (!!! on rev2 board GPIO 27 !!!)
Pin #14 (D7) connects to cobber #22 (white wire)
Pin #15 (LED +) goes to +5V (red wire)
Pin #16 (LED -) goes to ground (black wire)

Important: This script works only with revision 2 boards!

You can’t perform that action at this time.