Skip to content


Subversion checkout URL

You can clone with
Download ZIP
Commits on Jan 12, 2012
  1. @gregkh

    Linux 3.0.17

    gregkh authored
  2. @xiw @gregkh

    xfs: fix acl count validation in xfs_acl_from_disk()

    xiw authored gregkh committed
    commit 093019c upstream.
    Commit fa8b18e didn't prevent the integer overflow and possible
    memory corruption.  "count" can go negative and bypass the check.
    Signed-off-by: Xi Wang <>
    Reviewed-by: Christoph Hellwig <>
    Signed-off-by: Ben Myers <>
    Signed-off-by: Greg Kroah-Hartman <>
  3. @ginkel @gregkh

    usb: cdc-acm: Fix acm_tty_hangup() vs. acm_tty_close() race

    ginkel authored gregkh committed
    [Not upstream as it was fixed differently for 3.3 with a much more
    "intrusive" rework of the driver - gregkh]
    There is a race condition involving acm_tty_hangup() and acm_tty_close()
    where hangup() would attempt to access tty->driver_data without proper
    locking and NULL checking after close() has potentially already set it
    to NULL.  One possibility to (sporadically) trigger this behavior is to
    perform a suspend/resume cycle with a running WWAN data connection.
    This patch addresses the issue by introducing a NULL check for
    tty->driver_data in acm_tty_hangup() protected by open_mutex and exiting
    gracefully when hangup() is invoked on a device that has already been
    Signed-off-by: Thilo-Alexander Ginkel <>
    Signed-off-by: Greg Kroah-Hartman <>
  4. @gregkh

    SCSI: mpt2sas: Added missing mpt2sas_base_detach call from scsih_remo… authored gregkh committed
    …ve context
    commit 9ae89b0 upstream.
    mpt2sas_base_detach() call was removed from _scsih_remove() while
    doing some code shuffling.  Mainly when we work on adding code for
    scsih_shutdown().  I have added back mpt2sas_base_detach() which will
    get callled from _scsih_remove().
    Signed-off-by: Kashyap Desai <>
    Signed-off-by: James Bottomley <>
  5. @srivatsabhat @gregkh

    PM / Sleep: Fix race between CPU hotplug and freezer

    srivatsabhat authored gregkh committed
    commit 79cfbdf upstream.
    The CPU hotplug notifications sent out by the _cpu_up() and _cpu_down()
    functions depend on the value of the 'tasks_frozen' argument passed to them
    (which indicates whether tasks have been frozen or not).
    (Examples for such CPU hotplug notifications: CPU_ONLINE, CPU_ONLINE_FROZEN,
    Thus, it is essential that while the callbacks for those notifications are
    running, the state of the system with respect to the tasks being frozen or
    not remains unchanged, *throughout that duration*. Hence there is a need for
    synchronizing the CPU hotplug code with the freezer subsystem.
    Since the freezer is involved only in the Suspend/Hibernate call paths, this
    patch hooks the CPU hotplug code to the suspend/hibernate notifiers
    the race between CPU hotplug and freezer, thus ensuring that CPU hotplug
    notifications will always be run with the state of the system really being
    what the notifications indicate, _throughout_ their execution time.
    Signed-off-by: Srivatsa S. Bhat <>
    Signed-off-by: Rafael J. Wysocki <>
    Signed-off-by: Greg Kroah-Hartman <>
  6. @gregkh

    bonding: fix error handling if slave is busy (v2)

    stephen hemminger authored gregkh committed
    commit f7d9821 upstream.
    If slave device already has a receive handler registered, then the
    error unwind of bonding device enslave function is broken.
    The following will leave a pointer to freed memory in the slave
    device list, causing a later kernel panic.
    # modprobe dummy
    # ip li add dummy0-1 link dummy0 type macvlan
    # modprobe bonding
    # echo +dummy0 >/sys/class/net/bond0/bonding/slaves
    The fix is to detach the slave (which removes it from the list)
    in the unwind path.
    Signed-off-by: Stephen Hemminger <>
    Reviewed-by: Nicolas de Pesloüan <>
    Signed-off-by: David S. Miller <>
    Signed-off-by: Greg Kroah-Hartman <>
  7. @aurelj @gregkh

    asix: fix infinite loop in rx_fixup()

    aurelj authored gregkh committed
    commit 6c15d74 upstream.
    At this point if skb->len happens to be 2, the subsequant skb_pull(skb, 4)
    call won't work and the skb->len won't be decreased and won't ever reach 0,
    resulting in an infinite loop.
    With an ASIX 88772 under heavy load, without this patch, rx_fixup() reaches
    an infinite loop in less than a minute. With this patch applied,
    no infinite loop even after hours of heavy load.
    Signed-off-by: Aurelien Jacobs <>
    Cc: Jussi Kivilinna <>
    Signed-off-by: David S. Miller <>
  8. @gregkh

    igmp: Avoid zero delay when receiving odd mixture of IGMP queries

    Ben Hutchings authored gregkh committed
    commit a8c1f65 upstream.
    Commit 5b7c840 ('ipv4: correct IGMP
    behavior on v3 query during v2-compatibility mode') added yet another
    case for query parsing, which can result in max_delay = 0.  Substitute
    a value of 1, as in the usual v3 case.
    Reported-by: Simon McVittie <>
    Signed-off-by: Ben Hutchings <>
    Signed-off-by: David S. Miller <>
  9. @gregkh

    OHCI: final fix for NVIDIA problems (I hope)

    Alan Stern authored gregkh committed
    commit c618759 upstream.
    Problems with NVIDIA's OHCI host controllers persist.  After looking
    carefully through the spec, I finally realized that when a controller
    is reset it then automatically goes into a SUSPEND state in which it
    is completely quiescent (no DMA and no IRQs) and from which it will
    not awaken until the system puts it into the OPERATIONAL state.
    Therefore there's no need to worry about controllers being in the
    RESET state for extended periods, or remaining in the OPERATIONAL
    state during system shutdown.  The proper action for device
    initialization is to put the controller into the RESET state (if it's
    not there already) and then to issue a software reset.  Similarly, the
    proper action for device shutdown is simply to do a software reset.
    This patch (as1499) implements such an approach.  It simplifies
    initialization and shutdown, and allows the NVIDIA shutdown-quirk code
    to be removed.
    Signed-off-by: Alan Stern <>
    Tested-by: Andre "Osku" Schmidt <>
    Tested-by: Arno Augustin <>
    Signed-off-by: Greg Kroah-Hartman <>
  10. @gregkh

    usb: ch9: fix up MaxStreams helper

    Felipe Balbi authored gregkh committed
    commit 18b7ede upstream.
    [ removed the dwc3 portion of the patch as it didn't apply to
    older kernels - gregkh]
    According to USB 3.0 Specification Table 9-22, if
    bmAttributes [4:0] are set to zero, it means "no
    streams supported", but the way this helper was
    defined on Linux, we will *always* have one stream
    which might cause several problems.
    For example on DWC3, we would tell the controller
    endpoint has streams enabled and yet start transfers
    with Stream ID set to 0, which would goof up the host
    While doing that, convert the macro to an inline
    function due to the different checks we now need.
    Signed-off-by: Felipe Balbi <>
    Signed-off-by: Sarah Sharp <>
    Signed-off-by: Greg Kroah-Hartman <>
  11. @snabb @gregkh

    usb: option: add ZD Incorporated HSPA modem

    snabb authored gregkh committed
    commit 3c8c931 upstream.
    Add support for Chinese Noname HSPA USB modem which is apparently
    manufactured by a company called ZD Incorporated (based on texts in the
    Windows drivers).
    This product is available at least from Dealextreme (SKU 80032) and
    possibly in India with name Olive V-MW250. It is based on Qualcomm
    MSM6280 chip.
    I needed to also add "options usb-storage quirks=0685:7000:i" in modprobe
    configuration because udevd or the kernel keeps poking the embedded
    fake-cd-rom which fails and causes the device to reset. There might be
    a better way to accomplish the same. usb_modeswitch is not needed with
    this device.
    Signed-off-by: Janne Snabb <>
    Signed-off-by: Greg Kroah-Hartman <>
  12. @gregkh

    USB: option: add id for 3G dongle Model VT1000 of Viettel

    VU Tuan Duc authored gregkh committed
    commit 5b06162 upstream.
    Add VendorID/ProductID for USB 3G dongle Model VT1000 of Viettel.
    Signed-off-by: VU Tuan Duc <>
    Signed-off-by: Greg Kroah-Hartman <>
  13. @jwrdegoede @gregkh

    xhci: Properly handle COMP_2ND_BW_ERR

    jwrdegoede authored gregkh committed
    commit 71d8572 upstream.
    I encountered a result of COMP_2ND_BW_ERR while improving how the pwc
    webcam driver handles not having the full usb1 bandwidth available to
    I created the following test setup, a NEC xhci controller with a
    single TT USB 2 hub plugged into it, with a usb keyboard and a pwc webcam
    plugged into the usb2 hub. This caused the following to show up in dmesg
    when trying to stream from the pwc camera at its highest alt setting:
    xhci_hcd 0000:01:00.0: ERROR: unexpected command completion code 0x23.
    usb 6-2.1: Not enough bandwidth for altsetting 9
    And usb_set_interface returned -EINVAL, which caused my pwc code to not
    do the right thing as it expected -ENOSPC.
    This patch makes the xhci driver properly handle COMP_2ND_BW_ERR and makes
    usb_set_interface return -ENOSPC as expected.
    This should be backported to stable kernels as old as 2.6.32.
    Signed-off-by: Hans de Goede <>
    Signed-off-by: Sarah Sharp <>
    Signed-off-by: Greg Kroah-Hartman <>
  14. @cladisch @gregkh

    usb: fix number of mapped SG DMA entries

    cladisch authored gregkh committed
    commit bc677d5 upstream.
    Add a new field num_mapped_sgs to struct urb so that we have a place to
    store the number of mapped entries and can also retain the original
    value of entries in num_sgs.  Previously, usb_hcd_map_urb_for_dma()
    would overwrite this with the number of mapped entries, which would
    break dma_unmap_sg() because it requires the original number of entries.
    This fixes warnings like the following when using USB storage devices:
     ------------[ cut here ]------------
     WARNING: at lib/dma-debug.c:902 check_unmap+0x4e4/0x695()
     ehci_hcd 0000:00:12.2: DMA-API: device driver frees DMA sg list with different entry count [map count=4] [unmap count=1]
     Modules linked in: ohci_hcd ehci_hcd
     Pid: 0, comm: kworker/0:1 Not tainted 3.2.0-rc2+ #319
     Call Trace:
      <IRQ>  [<ffffffff81036d3b>] warn_slowpath_common+0x80/0x98
      [<ffffffff81036de7>] warn_slowpath_fmt+0x41/0x43
      [<ffffffff811fa5ae>] check_unmap+0x4e4/0x695
      [<ffffffff8105e92c>] ? trace_hardirqs_off+0xd/0xf
      [<ffffffff8147208b>] ? _raw_spin_unlock_irqrestore+0x33/0x50
      [<ffffffff811fa84a>] debug_dma_unmap_sg+0xeb/0x117
      [<ffffffff8137b02f>] usb_hcd_unmap_urb_for_dma+0x71/0x188
      [<ffffffff8137b166>] unmap_urb_for_dma+0x20/0x22
      [<ffffffff8137b1c5>] usb_hcd_giveback_urb+0x5d/0xc0
      [<ffffffffa0000d02>] ehci_urb_done+0xf7/0x10c [ehci_hcd]
      [<ffffffffa0001140>] qh_completions+0x429/0x4bd [ehci_hcd]
      [<ffffffffa000340a>] ehci_work+0x95/0x9c0 [ehci_hcd]
     ---[ end trace f29ac88a5a48c580 ]---
     Mapped at:
      [<ffffffff811faac4>] debug_dma_map_sg+0x45/0x139
      [<ffffffff8137bc0b>] usb_hcd_map_urb_for_dma+0x22e/0x478
      [<ffffffff8137c494>] usb_hcd_submit_urb+0x63f/0x6fa
      [<ffffffff8137d01c>] usb_submit_urb+0x2c7/0x2de
      [<ffffffff8137dcd4>] usb_sg_wait+0x55/0x161
    Signed-off-by: Clemens Ladisch <>
    Signed-off-by: Greg Kroah-Hartman <>
  15. @noradtux @gregkh

    USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c

    noradtux authored gregkh committed
    commit 08e87d0 upstream.
    Hi, below patch adds the USB-ID of the serial adapters sold by
    Multiplex RC (
    Signed-off-by: Malte Schröder <>
    Cc: stable <>
    Signed-off-by: Greg Kroah-Hartman <>
  16. @jhovold @gregkh

    USB: omninet: fix write_room

    jhovold authored gregkh committed
    commit 694c630 upstream.
    Fix regression introduced by commit 507ca9b ([PATCH] USB: add
    ability for usb-serial drivers to determine if their write urb is
    currently being used.) which inverted the logic in write_room so that it
    returns zero when the write urb is actually free.
    Signed-off-by: Johan Hovold <>
    Signed-off-by: Greg Kroah-Hartman <>
  17. @felipec @gregkh

    usb: musb: fix pm_runtime mismatch

    felipec authored gregkh committed
    commit 772aed4 upstream.
    In musb_init_controller() there's a pm_runtime_put(), but there's no
    pm_runtime_get(), which creates a mismatch that causes the driver to
    sleep when it shouldn't.
    This was introduced in 7acc619[1], but it wasn't triggered in my setup
    until 18a2689[2] was merged to Linus' branch at point df0914[3]. IOW;
    when PM is working as it was supposed to.
    However, it seems most of the time this is used in a way that keeps the
    counter above 0, so nobody noticed. Also, it seems to depend on the
    configuration used in versions before 3.1, but not later (or in it).
    I found the problem by loading isp1704_charger before any usb gadgets:
    All versions after 2.6.39 are affected.
    [1] usb: musb: Idle path retention and offmode support for OMAP3
    [2] OMAP2+: musb: hwmod adaptation for musb registration
    [3] Merge branch 'omap-for-linus' of git://
    Cc: Hema HK <>
    Signed-off-by: Felipe Contreras <>
    Signed-off-by: Felipe Balbi <>
  18. @gregkh

    USB: add quirk for another camera

    Oliver Neukum authored gregkh committed
    commit 35284b3 upstream.
    The Guillemot Webcam Hercules Dualpix Exchange camera
    has been reported with a second ID.
    Signed-off-by: Oliver Neukum <>
    Signed-off-by: Greg Kroah-Hartman <>
  19. @gregkh

    usb: usb-storage doesn't support dynamic id currently, the patch disa…

    Huajun Li authored gregkh committed
    …bles the feature to fix an oops
    commit 1a3a026 upstream.
    Echo vendor and product number of a non usb-storage device to
    usb-storage driver's new_id, then plug in the device to host and you
    will find following oops msg, the root cause is usb_stor_probe1()
    refers invalid id entry if giving a dynamic id, so just disable the
    [ 3105.018012] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
    [ 3105.018062] CPU 0
    [ 3105.018075] Modules linked in: usb_storage usb_libusual bluetooth
    dm_crypt binfmt_misc snd_hda_codec_analog snd_hda_intel snd_hda_codec
    snd_hwdep hp_wmi ppdev sparse_keymap snd_pcm snd_seq_midi snd_rawmidi
    snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse snd
    serio_raw tpm_infineon soundcore i915 snd_page_alloc tpm_tis
    parport_pc tpm tpm_bios drm_kms_helper drm i2c_algo_bit video lp
    parport usbhid hid sg sr_mod sd_mod ehci_hcd uhci_hcd usbcore e1000e
    usb_common floppy
    [ 3105.018408]
    [ 3105.018419] Pid: 189, comm: khubd Tainted: G          I  3.2.0-rc7+
    #29 Hewlett-Packard HP Compaq dc7800p Convertible Minitower/0AACh
    [ 3105.018481] RIP: 0010:[<ffffffffa045830d>]  [<ffffffffa045830d>]
    usb_stor_probe1+0x2fd/0xc20 [usb_storage]
    [ 3105.018536] RSP: 0018:ffff880056a3d830  EFLAGS: 00010286
    [ 3105.018562] RAX: ffff880065f4e648 RBX: ffff88006bb28000 RCX: 0000000000000000
    [ 3105.018597] RDX: ffff88006f23c7b0 RSI: 0000000000000001 RDI: 0000000000000206
    [ 3105.018632] RBP: ffff880056a3d900 R08: 0000000000000000 R09: ffff880067365000
    [ 3105.018665] R10: 00000000000002ac R11: 0000000000000010 R12: ffff6000b41a7340
    [ 3105.018698] R13: ffff880065f4ef60 R14: ffff88006bb28b88 R15: ffff88006f23d270
    [ 3105.018733] FS:  0000000000000000(0000) GS:ffff88007a200000(0000)
    [ 3105.018773] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    [ 3105.018801] CR2: 00007fc99c8c4650 CR3: 0000000001e05000 CR4: 00000000000006f0
    [ 3105.018835] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 3105.018870] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 3105.018906] Process khubd (pid: 189, threadinfo ffff880056a3c000,
    task ffff88005677a400)
    [ 3105.018945] Stack:
    [ 3105.018959]  0000000000000000 0000000000000000 ffff880056a3d8d0
    [ 3105.019011]  0000000000000000 ffff880056a3d918 ffff880000000000
    [ 3105.019058]  ffff880056a3d8d0 0000000000000012 ffff880056a3d8d0
    [ 3105.019105] Call Trace:
    [ 3105.019128]  [<ffffffffa0458cd4>] storage_probe+0xa4/0xe0 [usb_storage]
    [ 3105.019173]  [<ffffffffa0097822>] usb_probe_interface+0x172/0x330 [usbcore]
    [ 3105.019211]  [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0
    [ 3105.019243]  [<ffffffff815fdd43>] __device_attach+0x73/0x90
    [ 3105.019272]  [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110
    [ 3105.019303]  [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0
    [ 3105.019334]  [<ffffffff815fd6c7>] device_attach+0xf7/0x120
    [ 3105.019364]  [<ffffffff815fc905>] bus_probe_device+0x45/0x80
    [ 3105.019396]  [<ffffffff815f98a6>] device_add+0x876/0x990
    [ 3105.019434]  [<ffffffffa0094e42>] usb_set_configuration+0x822/0x9e0 [usbcore]
    [ 3105.019479]  [<ffffffffa00a3492>] generic_probe+0x62/0xf0 [usbcore]
    [ 3105.019518]  [<ffffffffa0097a46>] usb_probe_device+0x66/0xb0 [usbcore]
    [ 3105.019555]  [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0
    [ 3105.019589]  [<ffffffff815fdd43>] __device_attach+0x73/0x90
    [ 3105.019617]  [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110
    [ 3105.019648]  [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0
    [ 3105.019680]  [<ffffffff815fd6c7>] device_attach+0xf7/0x120
    [ 3105.019709]  [<ffffffff815fc905>] bus_probe_device+0x45/0x80
    [ 3105.021040] usb usb6: usb auto-resume
    [ 3105.021045] usb usb6: wakeup_rh
    [ 3105.024849]  [<ffffffff815f98a6>] device_add+0x876/0x990
    [ 3105.025086]  [<ffffffffa0088987>] usb_new_device+0x1e7/0x2b0 [usbcore]
    [ 3105.025086]  [<ffffffffa008a4d7>] hub_thread+0xb27/0x1ec0 [usbcore]
    [ 3105.025086]  [<ffffffff810d5200>] ? wake_up_bit+0x50/0x50
    [ 3105.025086]  [<ffffffffa00899b0>] ? usb_remote_wakeup+0xa0/0xa0 [usbcore]
    [ 3105.025086]  [<ffffffff810d49b8>] kthread+0xd8/0xf0
    [ 3105.025086]  [<ffffffff81939884>] kernel_thread_helper+0x4/0x10
    [ 3105.025086]  [<ffffffff8192a8c0>] ? _raw_spin_unlock_irq+0x50/0x80
    [ 3105.025086]  [<ffffffff8192b1b4>] ? retint_restore_args+0x13/0x13
    [ 3105.025086]  [<ffffffff810d48e0>] ? __init_kthread_worker+0x80/0x80
    [ 3105.025086]  [<ffffffff81939880>] ? gs_change+0x13/0x13
    [ 3105.025086] Code: 00 48 83 05 cd ad 00 00 01 48 83 05 cd ad 00 00
    01 4c 8b ab 30 0c 00 00 48 8b 50 08 48 83 c0 30 48 89 45 a0 4c 89 a3
    40 0c 00 00 <41> 0f b6 44 24 10 48 89 55 a8 3c ff 0f 84 b8 04 00 00 48
    83 05
    [ 3105.025086] RIP  [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20
    [ 3105.025086]  RSP <ffff880056a3d830>
    [ 3105.060037] hub 6-0:1.0: hub_resume
    [ 3105.062616] usb usb5: usb auto-resume
    [ 3105.064317] ehci_hcd 0000:00:1d.7: resume root hub
    [ 3105.094809] ---[ end trace a7919e7f17c0a727 ]---
    [ 3105.130069] hub 5-0:1.0: hub_resume
    [ 3105.132131] usb usb4: usb auto-resume
    [ 3105.132136] usb usb4: wakeup_rh
    [ 3105.180059] hub 4-0:1.0: hub_resume
    [ 3106.290052] usb usb6: suspend_rh (auto-stop)
    [ 3106.290077] usb usb4: suspend_rh (auto-stop)
    Signed-off-by: Huajun Li <>
    Signed-off-by: Greg Kroah-Hartman <>
  20. @gregkh

    USB: isight: fix kernel bug when loading firmware

    gregkh authored
    commit 59bf5cf upstream.
    We were sending data on the stack when uploading firmware, which causes
    some machines fits, and is not allowed.  Fix this by using the buffer we
    already had around for this very purpose.
    Reported-by: Wouter M. Koolen <>
    Tested-by: Wouter M. Koolen <>
    Signed-off-by: Greg Kroah-Hartman <>
  21. @JuliaLawall @gregkh

    drivers/usb/class/cdc-acm.c: clear dangling pointer

    JuliaLawall authored gregkh committed
    commit e7c8e86 upstream.
    On some failures, the country_code field of an acm structure is freed
    without freeing the acm structure itself.  Elsewhere, operations including
    memcpy and kfree are performed on the country_code field.  The patch sets
    the country_code field to NULL when it is freed, and likewise sets the
    country_code_size field to 0.
    Signed-off-by: Julia Lawall <>
    Acked-by: Oliver Neukum <>
    Signed-off-by: Greg Kroah-Hartman <>
  22. @jankara @gregkh

    udf: Fix deadlock when converting file from in-ICB one to normal one

    jankara authored gregkh committed
    commit d2eb8c3 upstream.
    During BKL removal in 2.6.38, conversion of files from in-ICB format to normal
    format got broken. We call ->writepage with i_data_sem held but udf_get_block()
    also acquires i_data_sem thus creating A-A deadlock.
    We fix the problem by dropping i_data_sem before calling ->writepage() which is
    safe since i_mutex still protects us against any changes in the file. Also fix
    pagelock - i_data_sem lock inversion in udf_expand_file_adinicb() by dropping
    i_data_sem before calling find_or_create_page().
    Reported-by: Matthias Matiak <>
    Tested-by: Matthias Matiak <>
    Reviewed-by: Namjae Jeon <>
    Signed-off-by: Jan Kara <>
    Signed-off-by: Greg Kroah-Hartman <>
  23. @gregkh

    cgroup: fix to allow mounting a hierarchy by name

    Li Zefan authored gregkh committed
    commit 0d19ea8 upstream.
    If we mount a hierarchy with a specified name, the name is unique,
    and we can use it to mount the hierarchy without specifying its
    set of subsystem names. This feature is documented is
    Documentation/cgroups/cgroups.txt section 2.3
    Here's an example:
    	# mount -t cgroup -o cpuset,name=myhier xxx /cgroup1
    	# mount -t cgroup -o name=myhier xxx /cgroup2
    But it was broken by commit 32a8cf2
    (cgroup: make the mount options parsing more accurate)
    This fixes the regression.
    Signed-off-by: Li Zefan <>
    Signed-off-by: Tejun Heo <>
    Signed-off-by: Greg Kroah-Hartman <>
  24. @claudioscordino @gregkh

    atmel_serial: fix spinlock lockup in RS485 code

    claudioscordino authored gregkh committed
    commit dbf1115 upstream.
    Patch to fix a spinlock lockup in the driver that sometimes happens when the
    tasklet starts.
    Signed-off-by: Claudio Scordino <>
    Signed-off-by: Dave Bender <>
    Tested-by: Dave Bender <>
    Acked-by: Nicolas Ferre <>
    Acked-by: Alan Cox <>
    Signed-off-by: Greg Kroah-Hartman <>
  25. @gregkh

    USB: update documentation for usbmon

    Alan Stern authored gregkh committed
    commit d8cae98 upstream.
    The documentation for usbmon is out of date; the usbfs "devices" file
    now exists in /sys/kernel/debug/usb rather than /proc/bus/usb.  This
    patch (as1505) updates the documentation accordingly, and also
    mentions that the necessary information can be found by running lsusb.
    Signed-off-by: Alan Stern <>
    CC: Pete Zaitcev <>
    Signed-off-by: Greg Kroah-Hartman <>
  26. @jankara @gregkh

    ext3: Don't warn from writepage when readonly inode is spotted after …

    jankara authored gregkh committed
    commit 33c104d upstream.
    WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is
    remounted read-only. This unnecessarily scares users (well, they should be
    scared because of filesystem error, but the stack trace distracts them from the
    right source of their fear ;-). We could as well just remove the WARN_ON but
    it's not hard to fix it to not trip on filesystem with errors and not use more
    cycles in the common case so that's what we do.
    Signed-off-by: Jan Kara <>
    Signed-off-by: Greg Kroah-Hartman <>
  27. @jeffmahoney @gregkh

    reiserfs: Force inode evictions before umount to avoid crash

    jeffmahoney authored gregkh committed
    commit a9e36da upstream.
    This patch fixes a crash in reiserfs_delete_xattrs during umount.
    When shrink_dcache_for_umount clears the dcache from
    generic_shutdown_super, delayed evictions are forced to disk. If an
    evicted inode has extended attributes associated with it, it will
    need to walk the xattr tree to locate and remove them.
    But since shrink_dcache_for_umount will BUG if it encounters active
    dentries, the xattr tree must be released before it's called or it will
    crash during every umount.
    This patch forces the evictions to occur before generic_shutdown_super
    by calling shrink_dcache_sb first. The additional evictions caused
    by the removal of each associated xattr file and dir will be automatically
    handled as they're added to the LRU list.
    Signed-off-by: Jeff Mahoney <>
    Signed-off-by: Jan Kara <>
    Signed-off-by: Greg Kroah-Hartman <>
  28. @jankara @gregkh

    reiserfs: Fix quota mount option parsing

    jankara authored gregkh committed
    commit a06d789 upstream.
    When jqfmt mount option is not specified on remount, we mistakenly clear
    s_jquota_fmt value stored in superblock. Fix the problem.
    Signed-off-by: Jan Kara <>
    Signed-off-by: Greg Kroah-Hartman <>
  29. @gregkh

    perf: Fix parsing of __print_flags() in TP_printk()

    Steven Rostedt authored gregkh committed
    commit 49908a1 upstream.
    A update is made to the sched:sched_switch event that adds some
    logic to the first parameter of the __print_flags() that shows the
    state of tasks. This change cause perf to fail parsing the flags.
    A simple fix is needed to have the parser be able to process ops
    within the argument.
    Reported-by: Andrew Vagin <>
    Signed-off-by: Steven Rostedt <>
    Signed-off-by: Greg Kroah-Hartman <>
  30. @gregkh

    IB/qib: Fix a possible data corruption when receiving packets

    Ram Vepa authored gregkh committed
    commit eddfb67 upstream.
    Prevent a receive data corruption by ensuring that the write to update
    the rcvhdrheadn register to generate an interrupt is at the very end
    of the receive processing.
    Signed-off-by: Ramkrishna Vepa <>
    Signed-off-by: Mike Marciniszyn <>
    Signed-off-by: Roland Dreier <>
    Signed-off-by: Greg Kroah-Hartman <>
  31. @aurelj @gregkh

    asix: new device id

    aurelj authored gregkh committed
    commit e8303a3 upstream.
    Adds the device id needed for the USB Ethernet Adapter delivered by
    ASUS with their Zenbook.
    Signed-off-by: Aurelien Jacobs <>
    Acked-by: Grant Grundler <>
    Signed-off-by: David S. Miller <>
    Signed-off-by: Greg Kroah-Hartman <>
  32. @gregkh

    powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit

    Li Zhong authored gregkh committed
    commit e4f387d upstream.
    Unpaired calling of probe_hcall_entry and probe_hcall_exit might happen
    as following, which could cause incorrect preempt count.
    __trace_hcall_entry => trace_hcall_entry -> probe_hcall_entry =>
    get_cpu_var => preempt_disable
    __trace_hcall_exit => trace_hcall_exit -> probe_hcall_exit =>
    put_cpu_var => preempt_enable
    A => B and A -> B means A calls B, but
    => means A will call B through function name, and B will definitely be
    -> means A will call B through function pointer, so B might not be
    called if the function pointer is not set.
    So error happens when only one of probe_hcall_entry and probe_hcall_exit
    get called during a hcall.
    This patch tries to move the preempt count operations from
    probe_hcall_entry and probe_hcall_exit to its callers.
    Reported-by: Paul E. McKenney <>
    Signed-off-by: Li Zhong <>
    Tested-by: Paul E. McKenney <>
    Signed-off-by: Benjamin Herrenschmidt <>
    Signed-off-by: Greg Kroah-Hartman <>
  33. @antonblanchard @gregkh

    powerpc/time: Handle wrapping of decrementer

    antonblanchard authored gregkh committed
    commit 37fb9a0 upstream.
    When re-enabling interrupts we have code to handle edge sensitive
    decrementers by resetting the decrementer to 1 whenever it is negative.
    If interrupts were disabled long enough that the decrementer wrapped to
    positive we do nothing. This means interrupts can be delayed for a long
    time until it finally goes negative again.
    While we hope interrupts are never be disabled long enough for the
    decrementer to go positive, we have a very good test team that can
    drive any kernel into the ground. The softlockup data we get back
    from these fails could be seconds in the future, completely missing
    the cause of the lockup.
    We already keep track of the timebase of the next event so use that
    to work out if we should trigger a decrementer exception.
    Signed-off-by: Anton Blanchard <>
    Signed-off-by: Benjamin Herrenschmidt <>
    Signed-off-by: Greg Kroah-Hartman <>
  34. @pof2 @gregkh

    wl12xx: Check buffer bound when processing nvs data

    pof2 authored gregkh committed
    commit f6efe96 upstream.
    An nvs with malformed contents could cause the processing of the
    calibration data to read beyond the end of the buffer. Prevent this
    from happening by adding bound checking.
    Signed-off-by: Pontus Fuchs <>
    Reviewed-by: Luciano Coelho <>
    Signed-off-by: Luciano Coelho <>
    Signed-off-by: Greg Kroah-Hartman <>
  35. @pof2 @gregkh

    wl12xx: Validate FEM index from ini file and FW

    pof2 authored gregkh committed
    commit 2131d3c upstream.
    Check for out of bound FEM index to prevent reading beyond ini
    memory end.
    Signed-off-by: Pontus Fuchs <>
    Reviewed-by: Luciano Coelho <>
    Signed-off-by: Luciano Coelho <>
    Signed-off-by: Greg Kroah-Hartman <>
Something went wrong with that request. Please try again.