…el/git/rostedt/linux-ktest Pull ktest confusion fix from Steven Rostedt: "With the v3.7-rc2 kernel, the network cards on my target boxes were not being brought up. I found that the modules for the network was not being installed. This was due to the config CONFIG_MODULES_USE_ELF_RELA that came before CONFIG_MODULES, and confused ktest in thinking that CONFIG_MODULES=y was not found. Ktest needs to test all configs and not just stop if something starts with CONFIG_MODULES." * tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
…broonie/misc Pull minor spi MXS fixes from Mark Brown: "These fixes are both pretty minor ones and are driver local." * tag 'spi-mxs' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi: mxs: Terminate DMA in case of DMA timeout spi: mxs: Assign message status after transfer finished
…l/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime." * tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) Revert "ARM i.MX25: Fix PWM per clock lookups" ARM: versatile: fix versatile_defconfig ARM: mvebu: update defconfig with 3.7 changes ARM: at91: fix at91x40 build ARM: socfpga: Fix socfpga compilation with early_printk() enabled ARM: SPEAr: Remove unused empty files MAINTAINERS: Add arm-soc tree entry ARM: dts: mxs: add the "clock-names" for gpmi-nand ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ...
Functions generic_file_splice_read and generic_file_splice_write access the pagecache directly. For block devices these functions must be locked so that block size is not changed while they are in progress. This patch is an additional fix for commit b87570f ("Fix a crash when block device is read and block size is changed at the same time") that locked aio_read, aio_write and mmap against block size change. Signed-off-by: Mikulas Patocka <email@example.com> Signed-off-by: Linus Torvalds <firstname.lastname@example.org>
Use rcu_read_lock_sched / rcu_read_unlock_sched / synchronize_sched instead of rcu_read_lock / rcu_read_unlock / synchronize_rcu. This is an optimization. The RCU-protected region is very small, so there will be no latency problems if we disable preempt in this region. So we use rcu_read_lock_sched / rcu_read_unlock_sched that translates to preempt_disable / preempt_disable. It is smaller (and supposedly faster) than preemptible rcu_read_lock / rcu_read_unlock. Signed-off-by: Mikulas Patocka <email@example.com> Signed-off-by: Linus Torvalds <firstname.lastname@example.org>
This patch introduces new barrier pair light_mb() and heavy_mb() for percpu rw semaphores. This patch fixes a bug in percpu-rw-semaphores where a barrier was missing in percpu_up_write. This patch improves performance on the read path of percpu-rw-semaphores: on non-x86 cpus, there was a smp_mb() in percpu_up_read. This patch changes it to a compiler barrier and removes the "#if defined(X86) ..." condition. From: Lai Jiangshan <email@example.com> Signed-off-by: Mikulas Patocka <firstname.lastname@example.org> Signed-off-by: Linus Torvalds <email@example.com>
This reverts commit 92063ce, it was applied prematurely, causing this build error for imx_v4_v5_defconfig: arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init': arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function) arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in Sascha Hauer explains: > There are several gates missing in clk-imx25.c. I have a patch which > adds support for them and I seem to have missed that the above depends > on it. Signed-off-by: Arnd Bergmann <firstname.lastname@example.org>
With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is no longer the default platform, so we need to enable CONFIG_ARCH_VERSATILE explicitly in order for that to be selected rather than the multiplatform configuration. Signed-off-by: Arnd Bergmann <email@example.com>
The split of 370 and XP into two Kconfig options and the multiplatform kernel support has changed a few Kconfig symbols, so let's update the mvebu_defconfig file with the latest changes. Signed-off-by: Thomas Petazzoni <firstname.lastname@example.org> Signed-off-by: Arnd Bergmann <email@example.com>
patch 738a0fd "ARM: at91: fix external interrupts in non-DT case" fixed a run-time error on some at91 platforms but did not apply the same change to at91x40, which now doesn't build. This changes at91x40 in the same way that the other platforms were changed. Signed-off-by: Arnd Bergmann <firstname.lastname@example.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <email@example.com>
Pull networking fixes from David Miller: "This is what we usually expect at this stage of the game, lots of little things, mostly in drivers. With the occasional 'oops didn't mean to do that' kind of regressions in the core code." 1) Uninitialized data in __ip_vs_get_timeouts(), from Arnd Bergmann 2) Reject invalid ACK sequences in Fast Open sockets, from Jerry Chu. 3) Lost error code on return from _rtl_usb_receive(), from Christian Lamparter. 4) Fix reset resume on USB rt2x00, from Stanislaw Gruszka. 5) Release resources on error in pch_gbe driver, from Veaceslav Falico. 6) Default hop limit not set correctly in ip6_template_metrics, fix from Li RongQing. 7) Gianfar PTP code requests wrong kind of resource during probe, fix from Wei Yang. 8) Fix VHOST net driver on big-endian, from Michael S Tsirkin. 9) Mallenox driver bug fixes from Jack Morgenstein, Or Gerlitz, Moni Shoua, Dotan Barak, and Uri Habusha. 10) usbnet leaks memory on TX path, fix from Hemant Kumar. 11) Use socket state test, rather than presence of FIN bit packet, to determine FIONREAD/SIOCINQ value. Fix from Eric Dumazet. 12) Fix cxgb4 build failure, from Vipul Pandya. 13) Provide a SYN_DATA_ACKED state to complement SYN_FASTOPEN in socket info dumps. From Yuchung Cheng. 14) Fix leak of security path in kfree_skb_partial(). Fix from Eric Dumazet. 15) Handle RX FIFO overflows more resiliently in pch_gbe driver, from Veaceslav Falico. 16) Fix MAINTAINERS file pattern for networking drivers, from Jean Delvare. 17) Add iPhone5 IDs to IPHETH driver, from Jay Purohit. 18) VLAN device type change restriction is too strict, and should not trigger for the automatically generated vlan0 device. Fix from Jiri Pirko. 19) Make PMTU/redirect flushing work properly again in ipv4, from Steffen Klassert. 20) Fix memory corruptions by using kfree_rcu() in netlink_release(). From Eric Dumazet. 21) More qmi_wwan device IDs, from Bjørn Mork. 22) Fix unintentional change of SNAT/DNAT hooks in generic NAT infrastructure, from Elison Niven. 23) Fix 3.6.x regression in xt_TEE netfilter module, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tilegx: fix some issues in the SW TSO support qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan net: usb: Fix memory leak on Tx data path net/mlx4_core: Unmap UAR also in the case of error flow net/mlx4_en: Don't use vlan tag value as an indication for vlan presence net/mlx4_en: Fix double-release-range in tx-rings bas_gigaset: fix pre_reset handling vhost: fix mergeable bufs on BE hosts gianfar_ptp: use iomem, not ioports resource tree in probe ipv6: Set default hoplimit as zero. NET_VENDOR_TI: make available for am33xx as well pch_gbe: fix error handling in pch_gbe_up() b43: Fix oops on unload when firmware not found mwifiex: clean up scan state on error mwifiex: return -EBUSY if specific scan request cannot be honored brcmfmac: fix potential NULL dereference Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz" ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation rt2x00: usb: fix reset resume rtlwifi: pass rx setup error code to caller ...
Pull slave-dmaengine fixes from Vinod Koul: "Three fixes for slave dmanegine. Two are for typo omissions in sifr dmaengine driver and the last one is for the imx driver fixing a missing unlock" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: sirf: fix a typo in moving running dma_desc to active queue dmaengine: sirf: fix a typo in dma_prep_interleaved dmaengine: imx-dma: fix missing unlock on error in imxdma_xfer_desc()
…/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael J Wysocki: - Fix for a memory leak in acpi_bind_one() from Jesper Juhl. - Fix for an error code path memory leak in pm_genpd_attach_cpuidle() from Jonghwan Choi. - Fix for smp_processor_id() usage in preemptible code in powernow-k8 from Andreas Herrmann. - Fix for a suspend-related memory leak in cpufreq stats from Xiaobing Tu. - Freezer fix for failure to clear PF_NOFREEZE along with PF_KTHREAD in flush_old_exec() from Oleg Nesterov. - acpi_processor_notify() fix from Alan Cox. * tag 'pm+acpi-for-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: missing break freezer: exec should clear PF_NOFREEZE along with PF_KTHREAD Fix memory leak in cpufreq stats. cpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible code PM / Domains: Fix memory leak on error path in pm_genpd_attach_cpuidle ACPI: Fix memory leak in acpi_bind_one()
…el/git/roland/infiniband Pull infiniband fixes from Roland Dreier: "Small batch of fixes for 3.7: - Fix crash in error path in cxgb4 - Fix build error on 32 bits in mlx4 - Fix SR-IOV bugs in mlx4" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() fails mlx4_core: Remove annoying debug messages from SR-IOV flow RDMA/cxgb4: Don't free chunk that we have failed to allocate IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualization IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF) IB/mlx4: Fix build error on platforms where UL is not 64 bits
…git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of USB fixes for the 3.7-rc tree. There's a lot of small USB serial driver fixes, and one larger one (the mos7840 driver changes are mostly just moving code around to fix problems.) Thanks to Johan Hovold for finding the problems and fixing them all up. Other than those, there is the usual new device ids, xhci bugfixes, and gadget driver fixes, nothing out of the ordinary. Signed-off-by: Greg Kroah-Hartman <firstname.lastname@example.org>" * tag 'usb-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (49 commits) xhci: trivial: Remove assigned but unused ep_ctx. xhci: trivial: Remove assigned but unused slot_ctx. xhci: Fix missing break in xhci_evaluate_context_result. xhci: Fix potential NULL ptr deref in command cancellation. ehci: Add yet-another Lucid nohandoff pci quirk ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions USB: mos7840: fix port_probe flow USB: mos7840: fix port-data memory leak USB: mos7840: remove invalid disconnect handling USB: mos7840: remove NULL-urb submission USB: qcserial: fix interface-data memory leak in error path USB: option: fix interface-data memory leak in error path USB: ipw: fix interface-data memory leak in error path USB: mos7840: fix port-device leak in error path USB: mos7840: fix urb leak at release USB: sierra: fix port-data memory leak USB: sierra: fix memory leak in probe error path USB: sierra: fix memory leak in attach error path USB: usb-wwan: fix multiple memory leaks in error paths USB: keyspan: fix NULL-pointer dereferences and memory leaks ...
…git/gregkh/tty Pull serial fix from Greg Kroah-Hartman: "Here is one patch, a revert of a omap serial driver patch that was causing problems, for your 3.7-rc tree. Signed-off-by: Greg Kroah-Hartman <email@example.com>" * tag 'tty-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: omap: fix software flow control"
…nel/git/gregkh/staging Pull staging driver fixes from Greg Kroah-Hartman: "Here are some staging driver fixes for your 3.7-rc tree. Nothing major here, a number of iio driver fixups that were causing problems, some comedi driver bugfixes, and a bunch of tidspbridge warning squashing and other regressions fixed from the 3.6 release. All have been in the linux-next releases for a bit. Signed-off-by: Greg Kroah-Hartman <firstname.lastname@example.org>" * tag 'staging-3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (32 commits) staging: tidspbridge: delete unused mmu functions staging: tidspbridge: ioremap physical address of the stack segment in shm staging: tidspbridge: ioremap dsp sync addr staging: tidspbridge: change type to __iomem for per and core addresses staging: tidspbridge: drop const from custom mmu implementation staging: tidspbridge: request the right irq for mmu staging: ipack: add missing include (implicit declaration of function 'kfree') staging: ramster: depends on NET staging: omapdrm: fix allocation size for page addresses array staging: zram: Fix handling of incompressible pages Staging: android: binder: Allow using highmem for binder buffers Staging: android: binder: Fix memory leak on thread/process exit staging: comedi: ni_labpc: fix possible NULL deref during detach staging: comedi: das08: fix possible NULL deref during detach staging: comedi: amplc_pc263: fix possible NULL deref during detach staging: comedi: amplc_pc236: fix possible NULL deref during detach staging: comedi: amplc_pc236: fix invalid register access during detach staging: comedi: amplc_dio200: fix possible NULL deref during detach staging: comedi: 8255_pci: fix possible NULL deref during detach staging: comedi: ni_daq_700: fix dio subdevice regression ...
…/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are a number of firmware core fixes for 3.7, and some other minor fixes. And some documentation updates thrown in for good measure. All have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <email@example.com>" * tag 'driver-core-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation:Chinese translation of Documentation/arm64/memory.txt Documentation:Chinese translation of Documentation/arm64/booting.txt Documentation:Chinese translation of Documentation/IRQ.txt firmware loader: document kernel direct loading sysfs: sysfs_pathname/sysfs_add_one: Use strlcat() instead of strcat() dynamic_debug: Remove unnecessary __used firmware loader: sync firmware cache by async_synchronize_full_domain firmware loader: let direct loading back on 'firmware_buf' firmware loader: fix one reqeust_firmware race firmware loader: cancel uncache work before caching firmware
…ernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg Kroah-Hartman: "Here are some driver fixes for 3.7. They include extcon driver fixes, a hyper-v bugfix, and two other minor driver fixes. All of these have been in the linux-next releases for a while. Signed-off-by: Greg Kroah-Hartman <firstname.lastname@example.org>" * tag 'char-misc-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: sonypi: suspend/resume callbacks should be conditionally compiled on CONFIG_PM_SLEEP Drivers: hv: Cleanup error handling in vmbus_open() extcon : register for cable interest by cable name extcon: trivial: kfree missed from remove path extcon: driver model release call not needed extcon: MAX77693: Add platform data for MUIC device to initialize registers extcon: max77693: Use max77693_update_reg for rmw operations extcon: Fix kerneldoc for extcon_set_cable_state and extcon_set_cable_state_ extcon: adc-jack: Add missing MODULE_LICENSE extcon: adc-jack: Fix checking return value of request_any_context_irq extcon: Fix return value in extcon_register_interest() extcon: unregister compat link on cleanup extcon: Unregister compat class at module unload to fix oops extcon: optimising the check_mutually_exclusive function extcon: standard cable names definition and declaration changed extcon-max8997: remove usage of ret in max8997_muic_handle_charger_type_detach extcon: Remove duplicate inclusion of extcon.h header file
In commit 800179c ("This adds symlink and hardlink restrictions to the Linux VFS"), the new link protections were enabled by default, in the hope that no actual application would care, despite it being technically against legacy UNIX (and documented POSIX) behavior. However, it does turn out to break some applications. It's rare, and it's unfortunate, but it's unacceptable to break existing systems, so we'll have to default to legacy behavior. In particular, it has broken the way AFD distributes files, see http://www.dwd.de/AFD/ along with some legacy scripts. Distributions can end up setting this at initrd time or in system scripts: if you have security problems due to link attacks during your early boot sequence, you have bigger problems than some kernel sysctl setting. Do: echo 1 > /proc/sys/fs/protected_symlinks echo 1 > /proc/sys/fs/protected_hardlinks to re-enable the link protections. Alternatively, we may at some point introduce a kernel config option that sets these kinds of "more secure but not traditional" behavioural options automatically. Reported-by: Nick Bowler <email@example.com> Reported-by: Holger Kiehl <Holger.Kiehl@dwd.de> Cc: Kees Cook <firstname.lastname@example.org> Cc: Ingo Molnar <email@example.com> Cc: Andrew Morton <firstname.lastname@example.org> Cc: Al Viro <email@example.com> Cc: Alan Cox <firstname.lastname@example.org> Cc: Theodore Ts'o <email@example.com> Cc: firstname.lastname@example.org # v3.6 Signed-off-by: Linus Torvalds <email@example.com>
…t/tiwai/sound Pull sound fixes from Takashi Iwai: "Slightly a high amount of commits come from Adrian Knoth's HDSPM driver fixes. Other than that, all small trival fixes or quirks that are pretty driver-specific." * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8994: Only enable extra BCLK cycles when required ALSA: als3000: check for the kzalloc return value ALSA: sound/isa/opti9xx/miro.c: eliminate possible double free ALSA: hda - Fix silent headphone output from Toshiba P200 ALSA: hdspm - Fix coding style in CTL_ELEM macros ALSA: hdspm - Fix typo in kcontrol element on RME MADI cards ALSA: hdspm - Fix sync_in detection on AES/AES32 ALSA: hdspm - Fix sync_in reporting on RME MADI cards ALSA: hdspm - Also report autosync_sample_rate on MADI and MADIface ALSA: hdspm - Fix reported autosync_sample_rate ALSA: hdspm - Fix sync check reporting on all RME HDSPM cards ALSA: hdspm - Report external rate in slave mode on PCI MADI ALSA: hdspm - Allow DDS/Varispeed to be set from userspace ALSA: hda - add dock support for Thinkpad T430 ASoC: ux500_msp_i2s: Fix devm_* and return code merge error ASoC: Ux500: Dispose of device nodes correctly
…wski/linux-dma-mapping Pull DMA-mapping revert from Marek Szyprowski: "Due to my mistake, my previous pull request (merged as commit cff7b8b: "Merge branch 'fixes_for_linus' ..") contained a patch which is aimed for v3.8 and lacks its dependences. This pull request reverts it and fixes build break of ARM architecture." * 'fixes_for_linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: Revert "ARM: dma-mapping: support debug_dma_mapping_error"
…inux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This fixes a couple of nasty page table initialization bugs which were causing kdump regressions. A clean rearchitecturing of the code is in the works - meanwhile these are reverts that restore the best-known-working state of the kernel. There's also EFI fixes and other small fixes." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, mm: Undo incorrect revert in arch/x86/mm/init.c x86: efi: Turn off efi_enabled after setup on mixed fw/kernel x86, mm: Find_early_table_space based on ranges that are actually being mapped x86, mm: Use memblock memory loop instead of e820_RAM x86, mm: Trim memory in memblock to be page aligned x86/irq/ioapic: Check for valid irq_cfg pointer in smp_irq_move_cleanup_interrupt x86/efi: Fix oops caused by incorrect set_memory_uc() usage x86-64: Fix page table accounting Revert "x86/mm: Fix the size calculation of mapping tables" MAINTAINERS: Add EFI git repository location
…linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Most of the kernel diffstat relates to a group of Intel P6 and KNC (Xeon-Phi Knights Corner) PMU driver fixes, neither of which is in heavy use, so we took the fixes. The rest is diverse smallish fixes to the tooling and kernel side." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Remove unused variable in nhmex_rbox_alter_er() perf/x86: Enable overflow on Intel KNC with a custom knc_pmu_handle_irq() perf/x86: Remove cpuc->enable check on Intl KNC event enable/disable perf/x86: Make Intel KNC use full 40-bit width of counters perf/x86/uncore: Handle pci_read_config_dword() errors perf/x86: Remove P6 cpuc->enabled check perf/x86: Update/fix generic events on P6 PMU perf/x86: Fix P6 FP_ASSIST event constraint perf, cpu hotplug: Use cached value of smp_processor_id() perf, cpu hotplug: Run CPU_STARTING notifiers with irqs disabled x86/perf: Fix virtualization sanity check perf test: Fix exclude_guest parse events tests perf tools: do not flush maps on COMM for perf report perf help: Fix --help for builtins perf trace: Check if sample raw_data field is set perf trace: Validate syscall id before growing syscall table
…/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has our series of fixes for the next rc. The biggest batch is from Jan Schmidt, fixing up some problems in our subvolume quota code and fixing btrfs send/receive to work with the new extended inode refs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: do not bug when we fail to commit the transaction Btrfs: fix memory leak when cloning root's node Btrfs: Use btrfs_update_inode_fallback when creating a snapshot Btrfs: Send: preserve ownership (uid and gid) also for symlinks. Btrfs: fix deadlock caused by the nested chunk allocation btrfs: Return EINVAL when length to trim is less than FSB Btrfs: fix memory leak in btrfs_quota_enable() Btrfs: send correct rdev and mode in btrfs-send Btrfs: extended inode refs support for send mechanism Btrfs: Fix wrong error handling code Fix a sign bug causing invalid memory access in the ino_paths ioctl. Btrfs: comment for loop in tree_mod_log_insert_move Btrfs: fix extent buffer reference for tree mod log roots Btrfs: determine level of old roots Btrfs: tree mod log's old roots could still be part of the tree Btrfs: fix a tree mod logging issue for root replacement operations Btrfs: don't put removals from push_node_left into tree mod log twice
…t/linville/wireless into for-davem
…/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: I/O address abuse cleanup
…inux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <firstname.lastname@example.org>: One is spi stuff for fix the device names for the different subtypes of the spi controller. And the other is adding missing .smp field for exynos4-dt and fixing memory sections for exynos4210-trats board. * 'v3.7-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Set .smp field of machine descriptor for exynos4-dt ARM: dts: Split memory into 4 sections for exynos4210-trats ARM: SAMSUNG: Add naming of s3c64xx-spi devices Signed-off-by: Arnd Bergmann <email@example.com>
…git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: "Fix oops with EFI variables on mixed 32/64-bit firmware/kernels and document EFI git repository location on kernel.org." Conflicts: arch/x86/include/asm/efi.h Signed-off-by: Ingo Molnar <firstname.lastname@example.org>
This change correctly computes the header length and data length in the fragments to avoid a bug where we would end up with extremely slow performance. Also adopt use of skb_frag_size() accessor. Signed-off-by: Chris Metcalf <email@example.com> Cc: firstname.lastname@example.org [v3.6] Signed-off-by: David S. Miller <email@example.com>
These devices provide QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the devices in cdc_ether and add their IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Dan Williams <firstname.lastname@example.org> Cc: email@example.com Acked-by: Greg Kroah-Hartman <firstname.lastname@example.org> Acked-by: Bjørn Mork <email@example.com> Signed-off-by: David S. Miller <firstname.lastname@example.org>
Driver anchors the tx urbs and defers the urb submission if a transmit request comes when the interface is suspended. Anchoring urb increments the urb reference count. These deferred urbs are later accessed by calling usb_get_from_anchor() for submission during interface resume. usb_get_from_anchor() unanchors the urb but urb reference count remains same. This causes the urb reference count to remain non-zero after usb_free_urb() gets called and urb never gets freed. Hence call usb_put_urb() after anchoring the urb to properly balance the reference count for these deferred urbs. Also, unanchor these deferred urbs during disconnect, to free them up. Signed-off-by: Hemant Kumar <email@example.com> Acked-by: Oliver Neukum <firstname.lastname@example.org> Signed-off-by: David S. Miller <email@example.com>
If a failure takes place during the EQ creation, we need to unmap the UAR memory block too. Signed-off-by: Dotan Barak <firstname.lastname@example.org> Signed-off-by: Uri Habusha <email@example.com> Signed-off-by: Or Gerlitz <firstname.lastname@example.org> Signed-off-by: David S. Miller <email@example.com>
The vlan tag can be zero. This is why it can't serve as an indication that packet requires VLAN header in the TX flow. Signed-off-by: Moni Shoua <firstname.lastname@example.org> Signed-off-by: Or Gerlitz <email@example.com> Signed-off-by: David S. Miller <firstname.lastname@example.org>