Skip to content

Latest commit

 

History

History
191 lines (160 loc) · 6.43 KB

Readme.md

File metadata and controls

191 lines (160 loc) · 6.43 KB

Warning: This project contains several hundred parts to print and hundreds hours of print. If you decide to take this path you will suffer a lot, you may lose some compatriot in the battle. You will no longer be the same after that, it could also cause hair loss.

Stargate Universe

This project is basically a small stargate made to decorate your desk. It features lightning for symbols like in the serie and the ring spins.

https://www.youtube.com/watch?v=xp08K564FYA for more details.

Unfortunately this project went through a lot of trial and error, so there are more parts than it should have especially in the base. Optimize it would require making a second gate to test new optimization. I'm no willing to do that now.

Inspired partly by:

URL
https://thestargateproject.com/build-a-stargate-and-dhd-3d-printed/
https://www.youtube.com/watch?v=m0cj_5DWYjw&ab_channel=StargateFan

Knowns issues

  • The start-up and recharge plunger is not perfect, using pogo pin and gold plated female contactor may improve it.

Copyrights & Thanks

Copyright:

File Info
stargateuniverse.woff Created by : Gilles Nuytens (http://www.thescifiworld.net/fonts.htm)
eurostile_extended2_bold.woff https://fontsgeek.com/fonts/eurostile-extended-2-bold?ref=readme
ancient_virtual.ttf.woff Created by VirtualCLD (http://www.thescifiworld.net/fonts.htm)
MGM (for the franchise)
Explanation and inspiration for the design https://stargate.fandom.com/wiki/Glyph#Milky_Way_glyphs
Adafruit OLED library
File Info
DF Robot https://www.dfrobot.com/
Embedded file generator (python) Created by ducalex https://github.com/ducalex

Original gate

Prerequisites

  • Correct knowledge of ESP32 and programming with ESP-IDF
  • At least 22 x 22 cm printer, capable of printing with 0.2 mm nozzle (yes, 0.2mm !)
    Warning: Don't even think of printing it using a bigger nozzle, it just won't work.
  • Have some knowledge in electronic.
  • ESP-IDF toolkit installed (tested on IDF 5.0)

Included softwares

Name Description
base-fw Base control firmware
ring-factory Basic firmware to upload firmware into ring
ring-fw Ring firmware
tools/otauploader.py Do upload using HTTP for OTA
tools/embeddedgen.py Generate embedded resources

Electronic board

A new electronic board has been created. Not yet tested entierely.

Parts to print

Ring

File name Count
Alignment-block-0.2mm_x9.stl 9
Chevron-insert-tool.stl 1
Home-magnet-holder_0.4mm-x1.stl 1
Inner-ring-0.4mm_x1.stl 1
Inner-ring-sensor-holder_0.4mm-x1.stl 1
Light-chevron-0.2mm_x18.stl 18
Light-chevron-cover-0.2mm-x9.stl 9
Magnet-ring-0.2mm-x1.stl 1
Module-With_wheel-0.2mm_x18.stl 18
Stargate-Back-0.2mm_x1.stl 1
Stargate-Back-Transparent-PwrSw_0.2mm-x1 1
Stargate-Back-Transparent-ResetBtn_0.2mm-x1 1
Stargate-Back-TransWindow-0.2mm-x10-12.stl 12
Stargate-Front-0.2mm_x1.stl 1
Symbols/symbol-template10_0.2mm-x1.stl 1
Symbols/symbol-template11_0.2mm-x1.stl 1
Symbols/symbol-template12_0.2mm-x1.stl 1
Symbols/symbol-template13_0.2mm-x1.stl 1
Symbols/symbol-template14_0.2mm-x1.stl 1
Symbols/symbol-template15_0.2mm-x1.stl 1
Symbols/symbol-template16_0.2mm-x1.stl 1
Symbols/symbol-template17_0.2mm-x1.stl 1
Symbols/symbol-template18_0.2mm-x1.stl 1
Symbols/symbol-template19_0.2mm-x1.stl 1
Symbols/symbol-template1_0.2mm-x1.stl 1
Symbols/symbol-template20_0.2mm-x1.stl 1
Symbols/symbol-template21_0.2mm-x1.stl 1
Symbols/symbol-template22_0.2mm-x1.stl 1
Symbols/symbol-template23_0.2mm-x1.stl 1
Symbols/symbol-template24_0.2mm-x1.stl 1
Symbols/symbol-template25_0.2mm-x1.stl 1
Symbols/symbol-template26_0.2mm-x1.stl 1
Symbols/symbol-template27_0.2mm-x1.stl 1
Symbols/symbol-template28_0.2mm-x1.stl 1
Symbols/symbol-template29_0.2mm-x1.stl 1
Symbols/symbol-template2_0.2mm-x1.stl 1
Symbols/symbol-template30_0.2mm-x1.stl 1
Symbols/symbol-template31_0.2mm-x1.stl 1
Symbols/symbol-template32_0.2mm-x1.stl 1
Symbols/symbol-template33_0.2mm-x1.stl 1
Symbols/symbol-template34_0.2mm-x1.stl 1
Symbols/symbol-template35_0.2mm-x1.stl 1
Symbols/symbol-template36_0.2mm-x1.stl 1
Symbols/symbol-template3_0.2mm-x1.stl 1
Symbols/symbol-template4_0.2mm-x1.stl 1
Symbols/symbol-template5_0.2mm-x1.stl 1
Symbols/symbol-template6_0.2mm-x1.stl 1
Symbols/symbol-template7_0.2mm-x1.stl 1
Symbols/symbol-template8_0.2mm-x1.stl 1
Symbols/symbol-template9_0.2mm-x1.stl 1
symbol-light-guide_0.2mm-x36.stl 36
Lower-bridge-0.4mm-x1.stl 1
TOTAL 148

Base

File name Count
Back-plunger-anchor_4mm-x2.stl 2
Back-plunger-arm_4mm-x1.stl 1
Back-plunger-bar_4mm-x1.stl 1
Back-plunger-Higher-spring_4mm-x1.stl 1
Back-plunger-Lower-spring_4mm-x1.stl 1
black-plunger-hammer-cover_4mm-x1.stl 1
black-plunger-hammer_4mm-x1.stl 1
Board-holder_4mm-x1.stl 1
Bottom-plate-v2_4mm-x1.stl 1
magnet-gear_4mm-x1.stl 1
Mechanic-Anchor-L_4mm-x1.stl 1
Mechanic-Anchor-R_4mm-x1.stl 1
Mechanic-Archor-p2-L_4mm-x1.stl 1
Mechanic-Archor-p2-R_4mm-x1.stl 1
Outer-back-cover-plug-blocking_4mm-x1.stl 1
Outer-back-cover-plug_4mm-x1.stl 1
Outer-back-cover_4mm-x1.stl 1
Outer-back-plate-reinforcement_4mm-x1.stl 1
Outer-back-plate_4mm-x1.stl 1
Outer-bottom-plate2_4mm-x1.stl 1
Outer-bottom-plate_4mm-x1.stl 1
Outer-front-plate_4mm-x1.stl 1
Outer-side-plate#1_4mm-x1.stl 1
Outer-side-plate#2_4mm-x1.stl 1
ramp-light-guide_4mm-x2.stl 2
Ramp_4mm-x1.stl 1
Side-back-cover-L_4mm-x1.stl 1
Side-back-cover-R_4mm-x1.stl 1
Side-ramp-cover-L_4mm-x1.stl 1
Side-ramp-cover-R_4mm-x1.stl 1
spacer_4mm-x4.stl 4
Stepper-bracket_4mm-x1.stl 1
Stepper-mount-1_4mm-x1.stl 1
Stepper-mount-2_4mm-x1.stl 1
top-cover_4mm-x1.stl 1
Truss#1_4mm-x1.stl 1
Truss#2_4mm-x1.stl 1
Side-overcover-L_4mm-x1.stl 1
Side-overcover-R_4mm-x1.stl 1
TOTAL 44

Wormhole

File name Count
Wormhole.stl 1
Wormhole-outer-rim.stl 1
Wormhole-filter.stl 1
TOTAL 3