New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Upload to Arduino embedded custom board #221

Closed
ncolomer opened this Issue May 29, 2015 · 10 comments

Comments

Projects
None yet
3 participants
@ncolomer

ncolomer commented May 29, 2015

I have build a custom board powered with an atmega328p. Currently, I program it over ISP by uploading platformio's generated .hex file via an USBasp v2 clone and AVRFuses software.

I'm looking for doing the upload task directly via platformio using the upload target. I saw in the Project Configuration File platformio.ini documentation that some parameters (such as board_mcu, board_f_cpu, upload_protocol or upload_speed) could help. But it is ever possible? In addition, it is possible to set MCU fuses?

The two following examples mentioned in the page above seem close to what I want to achieve:

4 - Platform atmelavr: Embedded board that is based on ATmega168 MCU with “arduino” bootloader
5 - Upload firmware via USB programmer (USBasp) to Platform atmelavr microcontrollers

But I can't make them running: either I mention the framework = arduino entry in platformio.ini file and I have the following error:

$ platformio run                                                                                                                                                                                     1 ↵
[Fri May 29 14:02:51 2015] Processing WeatherMote_v01 (upload_protocol: usbasp -B5, framework: arduino, build_flags: -Llibs -DDEBUG -Wl,-u,vfprintf -lprintf_flt, board_f_cpu: 16000000L, platform: atmelavr, upload_speed: 19200, board_mcu: atmega328p, targets: upload)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TypeError: argument of type 'NoneType' is not iterable:
File "/usr/local/lib/python2.7/site-packages/platformio/builder/main.py", line 122:
SConscript(env.subst("$BUILD_SCRIPT"))
File "/usr/local/lib/scons-2.3.0/SCons/Script/SConscript.py", line 609:
return method(*args, **kw)
File "/usr/local/lib/scons-2.3.0/SCons/Script/SConscript.py", line 546:
return _SConscript(self.fs, *files, **subst_kw)
File "/usr/local/lib/scons-2.3.0/SCons/Script/SConscript.py", line 260:
exec _file_ in call_stack[-1].globals
File "/usr/local/lib/python2.7/site-packages/platformio/builder/scripts/atmelavr.py", line 92:
target_elf = env.BuildFirmware()
File "/usr/local/lib/scons-2.3.0/SCons/Environment.py", line 223:
return self.method(*nargs, **kwargs)
File "/usr/local/lib/python2.7/site-packages/platformio/builder/tools/platformio.py", line 28:
env.BuildFramework()
File "/usr/local/lib/scons-2.3.0/SCons/Environment.py", line 223:
return self.method(*nargs, **kwargs)
File "/usr/local/lib/python2.7/site-packages/platformio/builder/tools/platformio.py", line 137:
if framework in env.get("BOARD_OPTIONS", {}).get("frameworks"):

or I do not mention it and the compilation fails since I'm relying on Arduino libs in my program:

 platformio run
[Fri May 29 14:02:36 2015] Processing WeatherMote_v01 (upload_protocol: usbasp -B5, build_flags: -Llibs -DDEBUG -Wl,-u,vfprintf -lprintf_flt, board_f_cpu: 16000000L, platform: atmelavr, upload_speed: 19200, board_mcu: atmega328p, targets: upload)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
avr-g++ -o .pioenvs/WeatherMote_v01/src/main.o -c -fno-exceptions -fno-threadsafe-statics -g -Os -Wall -ffunction-sections -fdata-sections -MMD -mmcu=atmega328p -DF_CPU=16000000L -DDEBUG -DPLATFORMIO=020003 -I.pioenvs/WeatherMote_v01/RF24 src/main.cpp
src/main.cpp:2:21: fatal error: Arduino.h: No such file or directory
#include <Arduino.h>
^
compilation terminated.
scons: *** [.pioenvs/WeatherMote_v01/src/main.o] Error 1

Any hints, idea (or simply can't do this way)?

@ivankravets ivankravets added this to the 2.0.3 milestone May 29, 2015

@valeros

This comment has been minimized.

Member

valeros commented May 29, 2015

Hi @ncolomer !

Your board is similar to Ardino Uno, so just try to add board = uno in your platformio.ini:

[env:WeatherMote_v01]
platform = atmelavr
framework = arduino
board = uno
board_mcu = atmega328p
upload_protocol=usbasp -B5
build_flags = -Llibs -DDEBUG -Wl,-u,vfprintf -lprintf_flt
board_f_cpu = 16000000L
upload_speed = 19200
targets = upload

@ivankravets ivankravets assigned ivankravets and unassigned valeros May 29, 2015

@ivankravets ivankravets added bug and removed help wanted labels May 29, 2015

@ivankravets

This comment has been minimized.

Member

ivankravets commented May 29, 2015

@ncolomer please upgrade PlatformIO to 2.0.3.dev1 from development branch and test with this platformio.ini:

[env:WeatherMote_v01]
platform = atmelavr
framework = arduino
board = uno
upload_protocol=usbasp -B5
build_flags = -Llibs -DDEBUG -Wl,-u,vfprintf -lprintf_flt
targets = upload

P.S: Thanks a lot for your reported issues. It allows us to improve PlatformIO.

@ncolomer

This comment has been minimized.

ncolomer commented May 29, 2015

Thanks @valeros @ivankravets for your answers!

Well I really enjoy using platformio for my electronic projects since i'm also a dev and I know build tools are always welcome, especially when dealing with C/C++ and embedded stuff! PlatformIO simplify a lot of things and gives a clear and featureful framework for hobbyists like me. I really want to use it in all my projects... and give as much help as I can :) You're doing great, guys!

So, now it compiles, but upload fails:

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf"

... ATmega328P conf stuff ...

Programmer Type : usbasp
Description     : USBasp, http://www.fischl.de/usbasp/

avrdude: set SCK frequency to 187500 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: reading input file ".pioenvs/WeatherMote_v01/firmware.hex"
avrdude: writing flash (8574 bytes):

Writing | ################################################## | 100% 5.44s

avrdude: 8574 bytes of flash written
avrdude: verifying flash memory against .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: load data flash data from input file .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: input file .pioenvs/WeatherMote_v01/firmware.hex contains 8574 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 4.29s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0040
0xe0 != 0xef
avrdude: verification error; content mismatch

avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: safemode: Fuses OK (H:07, E:DF, L:FF)

avrdude done.  Thank you.

scons: *** [upload] Error 1

avrdude: safemode: Fuses OK (H:07, E:DF, L:FF)

Fuses are what I set previously using AVRFuses software. I suppose they are not overridden. What if I want to specify others? Do I still need stuff like AVRFuses?

avrdude: set SCK frequency to 187500 Hz

I have a doubt with this frequency (we program Arduino at 19200 bauds, no?), but I suppose it's the default value.

avrdude: verification error, first mismatch at byte 0x0040
0xe0 != 0xef
avrdude: verification error; content mismatch

So there is a mismatch during verification that let me think the writing goes wrong.

The following command is run by PlatformIO (and its embedded avrdude): "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude" -v -D -p atmega328p -C "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf" -c usbasp -B5 -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i. Do you know what means the -B5?

And the following command is what is run by AVRFuses when burning a .hex files (I installed avrdude 6.1 via homebrew): /usr/local/Cellar/avrdude/6.1/bin/avrdude -c usbasp-clone -p ATmega328P -qq -U flash:w:/Users/ncolomer/Developer/Workspace/electronics/HomeMote/WeatherMote/.pioenvs/WeatherMote_v01/firmware.hex

There is some difference, including CLI options, but I can't really explain them.

@ivankravets ivankravets reopened this May 29, 2015

@ivankravets

This comment has been minimized.

Member

ivankravets commented May 29, 2015

Have you tried this?

[env:WeatherMote_v01]
platform = atmelavr
framework = arduino
board = uno
upload_protocol=usbasp-clone
build_flags = -Llibs -DDEBUG -Wl,-u,vfprintf -lprintf_flt
targets = upload
@ncolomer

This comment has been minimized.

ncolomer commented May 30, 2015

Nop :( The usbasp-clone upload protocol is correctly recognized but the error remains the same:

avrdude: verification error, first mismatch at byte 0x0040
0xe0 != 0xef
avrdude: verification error; content mismatch

Full log output:

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf"

Using Port                    : usb
Using Programmer              : usbasp-clone
AVR Part                      : ATmega328P
Chip Erase delay              : 9000 us
PAGEL                         : PD7
BS2                           : PC2
RESET disposition             : dedicated
RETRY pulse                   : SCK
serial program mode           : yes
parallel program mode         : yes
Timeout                       : 200
StabDelay                     : 100
CmdexeDelay                   : 25
SyncLoops                     : 32
ByteDelay                     : 0
PollIndex                     : 3
PollValue                     : 0x53
Memory Detail                 :

Block Poll               Page                       Polled
Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

Programmer Type : usbasp
Description     : Any usbasp clone with correct VID/PID

avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: reading input file ".pioenvs/WeatherMote_v01/firmware.hex"
avrdude: writing flash (8574 bytes):

Writing | ################################################## | 100% 5.42s

avrdude: 8574 bytes of flash written
avrdude: verifying flash memory against .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: load data flash data from input file .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: input file .pioenvs/WeatherMote_v01/firmware.hex contains 8574 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 4.29s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0040
0xe0 != 0xef
avrdude: verification error; content mismatch

avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: safemode: Fuses OK (H:07, E:DF, L:FF)

avrdude done.  Thank you.

scons: *** [upload] Error 1

Here is the output when I use AVRFuses:

Programming flash...

/usr/local/Cellar/avrdude/6.1/bin/avrdude -c usbasp-clone -p ATmega328P -qq -U flash:w:/Users/ncolomer/Developer/Workspace/electronics/HomeMote/WeatherMote/.pioenvs/WeatherMote_v01/firmware.hex

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
SUCCESS

Verifying flash...

/usr/local/Cellar/avrdude/6.1/bin/avrdude -c usbasp-clone -p ATmega328P -qq -U flash:v:/Users/ncolomer/Developer/Workspace/electronics/HomeMote/WeatherMote/.pioenvs/WeatherMote_v01/firmware.hex

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
SUCCESS
@ivankravets

This comment has been minimized.

Member

ivankravets commented May 30, 2015

Thanks, let's try a few variants:

a)

"/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude" -v -p atmega328p -C "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf" -c usbasp-clone -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

b)

"/usr/local/Cellar/avrdude/6.1/bin/avrdude" -v -p atmega328p -C "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf" -c usbasp-clone -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

c)

"/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude" -v -p atmega328p -C "/usr/local/Cellar/avrdude/6.1/etc/avrdude.conf" -c usbasp-clone -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

d)

"/usr/local/Cellar/avrdude/6.1/bin/avrdude" -v -c usbasp-clone -p ATmega328P -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

All commands should be performed from project directory where platformio.ini is located.

@ncolomer

This comment has been minimized.

ncolomer commented Jun 1, 2015

(sorry for the delay) Here are the output of commands

a) is ok

$ "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude" -v -p atmega328p -C "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf" -c usbasp-clone -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf"
         User configuration file is "/Users/ncolomer/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : usbasp-clone
         AVR Part                      : ATmega328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : usbasp
         Description     : Any usbasp clone with correct VID/PID

avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file ".pioenvs/WeatherMote_v01/firmware.hex"
avrdude: writing flash (10562 bytes):

Writing | ################################################## | 100% 6.52s

avrdude: 10562 bytes of flash written
avrdude: verifying flash memory against .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: load data flash data from input file .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: input file .pioenvs/WeatherMote_v01/firmware.hex contains 10562 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 5.32s

avrdude: verifying ...
avrdude: 10562 bytes of flash verified

avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: safemode: Fuses OK (H:07, E:DF, L:FF)

avrdude done.  Thank you.

b) is ok

$ "/usr/local/Cellar/avrdude/6.1/bin/avrdude" -v -p atmega328p -C "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf" -c usbasp-clone -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

avrdude: Version 6.1, compiled on May 13 2015 at 13:36:03
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf"
         User configuration file is "/Users/ncolomer/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : usbasp-clone
         AVR Part                      : ATmega328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : usbasp
         Description     : Any usbasp clone with correct VID/PID

avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file ".pioenvs/WeatherMote_v01/firmware.hex"
avrdude: writing flash (10562 bytes):

Writing | ################################################## | 100% 6.52s

avrdude: 10562 bytes of flash written
avrdude: verifying flash memory against .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: load data flash data from input file .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: input file .pioenvs/WeatherMote_v01/firmware.hex contains 10562 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 5.33s

avrdude: verifying ...
avrdude: 10562 bytes of flash verified

avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: safemode: Fuses OK (E:07, H:DF, L:FF)

avrdude done.  Thank you.

c) is ko

$ "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude" -v -p atmega328p -C "/usr/local/Cellar/avrdude/6.1/etc/avrdude.conf" -c usbasp-clone -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/Cellar/avrdude/6.1/etc/avrdude.conf"
avrdude: syntax error at /usr/local/Cellar/avrdude/6.1/etc/avrdude.conf:999

I don't really explain why, line 999 seems ok:

programmer
  id    = "jtag3";
  desc  = "Atmel AVR JTAGICE3 in JTAG mode";
  type  = "jtagice3";
  connection_type = usb;
  usbpid = 0x2110, 0x2140; # line 999
;

d) is ok

"/usr/local/Cellar/avrdude/6.1/bin/avrdude" -v -c usbasp-clone -p ATmega328P -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i                                                                    1 ↵

avrdude: Version 6.1, compiled on May 13 2015 at 13:36:03
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/usr/local/Cellar/avrdude/6.1/etc/avrdude.conf"
         User configuration file is "/Users/ncolomer/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : usbasp-clone
         AVR Part                      : ATmega328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : usbasp
         Description     : Any usbasp clone with correct VID/PID

avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file ".pioenvs/WeatherMote_v01/firmware.hex"
avrdude: writing flash (10562 bytes):

Writing | ################################################## | 100% 6.53s

avrdude: 10562 bytes of flash written
avrdude: verifying flash memory against .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: load data flash data from input file .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: input file .pioenvs/WeatherMote_v01/firmware.hex contains 10562 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 5.33s

avrdude: verifying ...
avrdude: 10562 bytes of flash verified

avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: safemode: Fuses OK (E:07, H:DF, L:FF)

avrdude done.  Thank you.
@ivankravets

This comment has been minimized.

Member

ivankravets commented Jun 1, 2015

Thanks a lot!

Could you try new develop? (2.0.3.dev2)

@ncolomer

This comment has been minimized.

ncolomer commented Jun 2, 2015

2.0.3.dev2 did the trick! Following is the platformio run -t upload output:

"/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude" -v -p atmega328p -C "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf" -c usbasp-clone -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf"

Using Port                    : usb
Using Programmer              : usbasp-clone
AVR Part                      : ATmega328P
Chip Erase delay              : 9000 us
PAGEL                         : PD7
BS2                           : PC2
RESET disposition             : dedicated
RETRY pulse                   : SCK
serial program mode           : yes
parallel program mode         : yes
Timeout                       : 200
StabDelay                     : 100
CmdexeDelay                   : 25
SyncLoops                     : 32
ByteDelay                     : 0
PollIndex                     : 3
PollValue                     : 0x53
Memory Detail                 :

Block Poll               Page                       Polled
Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

Programmer Type : usbasp
Description     : Any usbasp clone with correct VID/PID

avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: error: programm enable: target doesn't answer. 1
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.


avrdude done.  Thank you.

scons: *** [upload] Error 1
======================================================================================= [ ERROR ] Took 3.25 seconds =======================================================================================
╭─ncolomer@v581  ~/Developer/Workspace/electronics/HomeMote/WeatherMote  ‹master*›
╰─$ platformio run                                                                                                                                                                                     1 ↵
[Tue Jun  2 19:47:42 2015] Processing WeatherMote_v01 (upload_protocol: usbasp-clone, build_flags: -Llibs -DDEBUG -Wl,-u,vfprintf -lprintf_flt, install_libs: 131,132,137, platform: atmelavr, board: uno, framework: arduino, targets: upload)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BeforeUpload(["upload"], [".pioenvs/WeatherMote_v01/firmware.hex"])
"/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude" -v -p atmega328p -C "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf" -c usbasp-clone -U flash:w:.pioenvs/WeatherMote_v01/firmware.hex:i

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "/Users/ncolomer/.platformio/packages/tool-avrdude/avrdude.conf"

Using Port                    : usb
Using Programmer              : usbasp-clone
AVR Part                      : ATmega328P
Chip Erase delay              : 9000 us
PAGEL                         : PD7
BS2                           : PC2
RESET disposition             : dedicated
RETRY pulse                   : SCK
serial program mode           : yes
parallel program mode         : yes
Timeout                       : 200
StabDelay                     : 100
CmdexeDelay                   : 25
SyncLoops                     : 32
ByteDelay                     : 0
PollIndex                     : 3
PollValue                     : 0x53
Memory Detail                 :

Block Poll               Page                       Polled
Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

Programmer Type : usbasp
Description     : Any usbasp clone with correct VID/PID

avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file ".pioenvs/WeatherMote_v01/firmware.hex"
avrdude: writing flash (10950 bytes):

Writing | ################################################## | 100% 6.96s

avrdude: 10950 bytes of flash written
avrdude: verifying flash memory against .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: load data flash data from input file .pioenvs/WeatherMote_v01/firmware.hex:
avrdude: input file .pioenvs/WeatherMote_v01/firmware.hex contains 10950 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 5.53s

avrdude: verifying ...
avrdude: 10950 bytes of flash verified

avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DF
avrdude: safemode: efuse reads as 7
avrdude: safemode: Fuses OK (H:07, E:DF, L:FF)

avrdude done.  Thank you.
@ivankravets

This comment has been minimized.

Member

ivankravets commented Jun 3, 2015

Thanks! 👍

@ivankravets ivankravets closed this Jun 3, 2015

ivankravets added a commit that referenced this issue Jun 3, 2015

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment