• BEFORE YOU DO ANYTHING, READ THIS FIRST.
• Main Instructions
• Step 1: Get the necessary tools
• Step 2: Prepare the 3D-printed parts for the electronics assembly
• Step 3: Prepare the electronics assembly jig
• Step 4: Prepare the PCBs
• Step 5: Attach the PCB anchor to the base PCB
• Step 6: Attach the vertical PCB to the PCB anchor
• Step 7: Insert the PCBs into the electronics assembly jig
• Step 8: Solder the pads of the base PCB and vertical PCB
• Step 9: Remove the completed electronics assembly from the assembly jig
• Step 10: Remove support material from 3D-printed parts
• Step 11: Prepare the scroll wheel holder
• Step 12: Insert scroll wheel holder into scroll wheel holder holder
• Step 13: Insert scroll wheel holder holder into electronics assembly
• Step 14: Preparing the base
• Step 15: Put threaded inserts into base
• Step 16: Assembling the base
• Step 17: Place electronics assembly onto base
• Step 18: Screw secondary buttons into base
• Step 19: Prepare scroll wheel
• Step 20: Insert dowels into scroll wheel
• Step 21: Thread silicone ring onto scroll wheel
• Step 22: Insert scroll wheel into base
• Step 23: Screw primary buttons into base
• Step 24: Preparing the top
• Step 25: Clear out the scroll wheel hole in the top
• Step 26: Put threaded inserts into top
• Step 27: Prepare the Bearing Press Jig
• Step 28: Insert the roller bearing and a Roller Bearing Dowel into the halves of the Bearing Press Jig
• Step 29: Press the halves of the Bearing Press Jig together
• Step 30: Remove the bearing from the Bearing Press Jig and repeat two more times
• Step 31: Insert roller bearings into top
• Step 32: Put the top onto the base
• Step 33: Insert the screws into the base and apply the friction pads
• Step 34: Insert the ball
• Step 35: Verify that the Ploopy Trackball is working correctly
• Step 36: Spin the ball to break in the bearings
• Step 37: All done!