An Arduino library that helps establish I2C communication between an A-Star 32U4 Robot Controller and a Raspberry Pi, with the Arduino acting as the I2C slave.
The Pololu USB Library (also known as libusbp) is a cross-platform C library for accessing USB devices.
Library to help interface with the on-board hardware of the Pololu Zumo 32U4 robot.
Library to help interface with the on-board hardware of the Romi 32U4 Control Board
This is a C++ library for the Arduino IDE that helps access the on-board hardware of the Balboa 32U4 control board.
Pololu USB AVR Programmer v2 software.
The Pololu USB Bootloader Utility (p-load) is a command-line program that allows you to read and write from the memories of certain Pololu USB bootloaders.
Arduino library for addressable RGB LED strips from Pololu
Pololu Arduino library for APA102 addressable RGB LEDs http://www.pololu.com/category/178/
Pololu Arduino library for LSM6DS33 accelerometer and gyro
C++ library for the Arduino IDE that allows you to control an LCD that uses the Hitachi HD44780 protocol.
Pololu Arduino library for VL53L0X time-of-flight distance sensor
Pololu Arduino library for LIS3MDL magnetometer
Library to help interface with the on-board hardware of Pololu A-Star 32U4 controllers.
C++ library for the Arduino IDE that allows you to manipulate general-purpose I/O (GPIO) pins on your Arduino or Arduino-compatible board with minimal overhead.
Arduino library for Pololu LSM303 boards
Arduino library for the Pololu QTR reflectance sensors
C++ library for the Arduino IDE that helps interface with pushbuttons by either reading the state of the button or monitoring it for press/release events
Arduino library for the Pololu Dual VNH5019 Motor Driver Shield
Arduino library for the Pololu Dual MC33926 Motor Driver Shield
Arduino library for the Pololu A4990 Dual Motor Driver Shield for Arduino http://www.pololu.com/product/2512
Arduino library for Pololu LPS25H and LPS331AP boards
Arduino library for the Pololu qik dual serial motor controllers
Pololu Arduino library for VL6180X distance and ambient light sensor
Example code for making your own PC applications that control Pololu USB Devices.
Arduino library for the Pololu DRV8835 Dual Motor Driver Shield for Arduino http://www.pololu.com/product/2511
RPicSim provides an interface to the MPLAB X PIC simulator that allows you to write simulator-based automated tests of PIC firmware with Ruby and RSpec.
A collection of example code and libraries for the P-Star 25K50 Micro, a programmable microcontroller board based on the PIC18F25K50.