… applications like the shiftbrite that don't use the control signals don't have to call radioComRxSignals() in order to receive the serial data.
…ytes are received over USB.
…der to get in to bootloader mode via the USB command; a prototype for the ISR from time.h must be present in the file that defines main() in order for the time.h functions to work.
…rate file, description.txt. Moved the param_arduino_DTR_pin parameter to the bottom of the list.
…al_mode 3, where it doesn't ever use the radio.
… DTR. Fixed & tested the correspondence between the control lines.
…t actually read the pin's output value.
…multiples of 8
…3 serial modes. Changed the usb_cdc_acm library's control signal interface to use functions instead of global variables (this required trivial changes to the usb_serial app). Added random.h to wixel.h.
… seems to fix the problem I was having with spurious ring indicators.
…f ACM_SERIAL_STATE_RING_SIGNAL. I think this will fix the spurious ring indicators I saw in commit 6215e28.
…evice if it gets reset. Tested it using the wireless_serial_app and it seems to work! The only bad thing I saw is that the Ring Indicator signal seems to be getting set sometimes, so I want to look in to that. ALSO: Made some little changes to the wireless_serial app to prevent unusual control signals from getting set.
…higher-level code when a reset packet is received.
…et. Enabled sniffing of packets with CRC errors. Removed the code that was blinking the red LED.
…minal program in the comments.
… over from radio_link).