Repository navigation
BLESpam
Warning
The method this app uses is fixed in Android and iOs too. Only works with old os versions. Since PP can't handle two way communication over BLE within a little time frame, it is not possible to fix it. You can use an ESP based solution for recent OS versions.
Warning
Using this app to disrupt or crash other people's devices without their consent may be illegal in your jurisdiction. The iOs crash mode explicitly crashes nearby unpatched iOS devices. Use responsibly and only on devices you own or have permission to test.
BLESpam continuously transmits spoofed Bluetooth Low Energy advertisement packets to trigger pairing popups, notifications, or instability on nearby devices. The MAC address and BLE channel (37, 38, or 39) are randomised automatically with each new packet. Each packet is transmitted 4 times before the app moves to the next one.
The protocol implementations are ported from the Flipper Zero Xtreme-Apps BLE spam module.
This is an external app (.ppma file on the SD card).
Select the target platform or behaviour from the dropdown:
- Android — Sends Google FastPair advertisement packets. Triggers a pairing popup on nearby Android phones. Android applies a per-device cooldown of approximately 15 minutes before showing the popup again.
- iOs — Sends Apple Continuity packets (Proximity Pair or Nearby Action type, chosen randomly). Triggers device suggestion notifications on nearby iOS devices. Effect depends on iOS version.
- iOs crash — Sends a specially crafted Apple Continuity packet. Causes unpatched iOS devices to crash after approximately one minute. A power cycle recovers the device.
- Windows — Sends Swift Pair packets. Triggers a device popup on nearby Windows machines. Behaviour depends on patch level and supported hardware.
- Samsung — Sends Samsung EasySetup packets (Galaxy Buds or Galaxy Watch models, chosen randomly). Triggers a pairing popup on nearby Samsung devices.
-
NameSpam — Broadcasts one of 9 fixed device names as a generic HID device advertisement:
PortaHack,PwnBt,iSpam,GenericFoodVagon,SignalSnoop,ByteBandit,RadioRogue,RadioRebel,ByteBlast. The name is chosen randomly each cycle. - NameRandom — Broadcasts a randomly generated 9-character alphanumeric string as the device name. A new name is generated each cycle.
-
NameCustom — Broadcasts names read line by line from
/BLESPAM/NAME.txton the SD card (one name per line, max 19 characters each). The file is cycled continuously. Falls back to NameSpam behaviour if the file is missing or unreadable. - All-Safe — Cycles randomly through all modes except iOs crash.
- All — Cycles randomly through all modes including iOs crash.
- Start / Stop: Begins or halts transmission.
- Rnd device (checkbox, default: on): When enabled, the device model or payload is randomised with each packet change. When disabled, the same payload is retransmitted repeatedly (MAC and channel are still randomised).
The console area shows the raw advertisement data hex of the current packet, updated approximately every 25 packet changes.
Settings are saved to tx_blespam.ini.
How to collaborate
Contributing Guidelines
Trusted contributors
How to ask questions correctly
- PortaPack Versions (which one to buy)
- Features
- HackRF Versions
-
Description of the hardware
- Enclosure/cases
- Care of PortaPack/HackRF
- Repairs
- Mods
🔧 Troubleshooting
- FAQ
- SolveBoard
- 🔌 Boot & power
- 💾 Firmware & recovery
- 📡 Receive & transmit
- 💳 SD card
- 🔗 USB connectivity
- 🧩 Apps
📥 Receivers
- 2-Tone-RX
- ACARS
- ADS-B
- AFSK
- AIS Boats
- Analog TV
- APRS RX
- Audio
- BLE RX
- Detector
- EPIRB RX
- ERT Meter
- Flex RX
- Fox-Hunt
- FPV-Detect
- FT8 RX
- gfxEQ
- Level
- Meteor
- Morse RX
- NOAA
- NRF
- POCSAG
- ProtoView
- Radio
- Radiosonde
- RDS RX
- RTTY RX
- Scanner
- Search
- Signal Hunter
- Spectrum Analyzer
- SSTV RX
- SubCar
- SubGhzD
- Tetra RX
- Time Sink
- TPMS RX
- VDL2 RX
- VOR RX
- Weather
- WeFax
- WMBus RX
📤 Transmitters
- 2-Tone-TX
- ADS-B(S) TX
- Adult Toys
- APRS TX
- BHT Xy/EP
- BLE TX
- BLESpam
- Burger Pager
- CVS Spam
- EPIRB TX
- Flex TX
- FlipperTX
- GPS Sim
- Hopper
- Jammer
- KeeLoq TX
- Key fob TX
- LGE Tool
- MDC-1200 TX
- Morse TX
- OOK
- OOK Brute
- OOK Editor
- P25 TX
- POCSAG TX
- RDS
- RTTY TX
- SAME TX
- Security+ TX
- Signal gen
- Soundboard
- Spectrum Painter
- SSTV
- TEDI/LCR
- TouchTunes
- TPMS TX
- VOR TX
- 🔄 Transceivers
- 🟡 Recon
- 🔴 Capture
▶️ Replay- 🖲️ Remote
- 🔍 Looking Glass
🛠️ Utilities
↳ 🐛 Debug Menu (in Utilities)
🎮 Games
⚙️ Settings
Compilation of the firmware
- Compile on WSL with ninja
- How to compile on Windows faster with WSL 2
- Compile on macOS (Docker)
- Compile on macOS (Homebrew)
- Using Docker and Kitematic
- Docker command-line reference
- Using Buddyworks and other CI platforms
- Notes for Buddy.Works (and other CI platforms)
- Using ARM on Debian host
- All in one script for ARM on Debian host
- Compile on Kali Linux (Debian-based)
- Compile on Arch based distro (exclude Asahi), or other weird distros
- General compiling guide (Linux, for experts)
- Dev build versions
- Notes About ccache
Software Dev Guides
- Code contribution rules
- Documentation standards & guidelines
- Create a Simple App
- Create a Simple External App
- External Apps informations
- Widgets
- UI positioning with macros
- SD Card (DEV)
- Access Radio Hardware
- Interpret Guru meditation crashes
- Create a Complex App
- Theme-system
- Debug via SWD & JTAG
- Debug with serial
- I2C drivers
- Unit tests
Tools
- Research
- UI Screenshots
-
Maintaining
- Creating a prod/stable release (Maintainers only)
- Maintaining rules
- Development States Notes