Skip to content
A simple board to connect a 16-pin Apple II joystick to the 9-pin connector on the back of Apple IIe and later computers.
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
doc
footprints.pretty
.gitignore
Joystick-cache.lib
Joystick.kicad_pcb
Joystick.net
Joystick.pro
Joystick.sch
LICENSE.txt
README.md
fp-lib-table
lib.dcm
lib.lib

README.md

Apple II Joystick Adapter

This small board lets you plug a 16-pin joystick into the external 9-pin joystick port on the Apple IIe. Although the Apple IIe has an internal 16-pin joystick port, I found that the connector on my joystick was too big to fit through any of the holes on the back of the IIe. So, I created this adapter to let me plug it in externally.

This adapter could also be useful for the Apple IIc, which does not have a 16-pin joystick port at all, although I have not tested it on a IIc.

Joystick Adapter

Bill of Materials

I found it necessary to remove the hex screws from the DE-9 connector, because they prevented it from mating with the connector on the Apple IIe.

Ordering the Board

You can order this board directly from OSH Park without needing to upload anything.

If you want to modify the design, the source is provided in KiCad format.

License

This project is licensed under CC-BY-SA 4.0.

The symbol and footprint for the DE-9 connector are from the official KiCad 5 library (CC-BY-SA 4.0 with exception).

Plugging in the joystick

Adapter with joystick

You can’t perform that action at this time.