The Damn Vulnerable Router Firmware Project
HTML Other
Switch branches/tags
Nothing to show
Clone or download
b1ack0wl
b1ack0wl DVRF_v03 release
DVRF_v03 release
Latest commit 2cb5ca3 May 18, 2016
Permalink
Failed to load latest commit information.
Firmware DVRF_v03 Release May 18, 2016
Pwnable Source DVRF_v03 Release May 18, 2016
Source Code DVRF_v03 release May 18, 2016
gdb Adding MIPS-I GDB Apr 11, 2016
.gitattributes Adding MIPS-I GDB Apr 11, 2016
README.md DVRF_v03 release May 18, 2016

README.md

Damn Vulnerable Router Firmware (DVRF) v0.3

Thanks for checking out my project. The goal of this project is to simulate a real world environment to help people learn about other CPU architectures outside of the x86_64 space. This project will also help people get into discovering new things about hardware.

As of now this firmware is tailored for the Linksys E1550 Device. If you do not have one don't worry! There's also QEMU and I encourage end users to experiment with both environments.

Installation

To Install this binary onto your E1550 simply go to the Firmware Upgrade page (http://192.168.1.1/Upgrade.asp) and point the upgrade path to DVRF_v03.bin and click "Upgrade"

Removal || Revert

To revert back to stock simply navigate to the main page of DVRF (http://192.168.1.1/index.asp), Click Browse, Point it to the stock firmware binary, and Click "Upload Firmware"

Getting Started

You don't have to have a E1550 in order to get started. The following link will show you how to get started with DVRF using QEMU to emulate the environment - https://www.praetorian.com/blog/getting-started-with-damn-vulnerable-router-firmware-dvrf-v0.1

Source Code for pwnables

Feel free to take a look at the source code for the pwnables so you can get a better understanding MIPS assembly. Please note that the compiled binaries used gcc flag -O0 to turn off compiler optimizations.

Compiling your own DVRF build

Execute merge_and_compile.sh and if the tar ball was successfully made you can run clean.sh to remove the 00* files. To compile just extract the TAR file and run make.sh and make sure to update toolchain.sh to the path of your toolchain The toolchain is located under ./projects/hnd/tools/linux/hndtools-mipsel-linux-uclibc-4.2.3/bin. Also note that the target linux version is 2.6 so you can either compile it on a 2.6 box like Fedora Core 11 or try compiling with the linux 2.6 headers.

=======

Fixes

  • Replaced execve("/bin/sh",0,0) with system("/bin/sh -c")
  • Due to "jr RA" I added exit(0) after the system() call to prevent infinite loops.
  • Extended buffer size on pwnable challenges that require shellcode.

Notes

  • DO NOT HAVE THE WAN PORT PLUGGED IN WHEN INSTALLING OR RUNNING THIS!!!
  • UART access is needed in order to execute the pwnable binaries.
  • WiFi is disabled, only the ethernet ports are available.
  • Encoder pwnable to be released in v04.

-b1ack0wl