Permalink
Switch branches/tags
Nothing to show
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
44 lines (40 sloc) 1.8 KB
/*-----------------------------------------------------------------------
Acrobotic - 01/12/2014
Author: MakerBro
Platforms: Arduino Uno R3
File: blink_external.ino
------------------------------------------------------------------------
Description:
This program is identical to the built-in Blink example. The idea is
for those using an Arduino Uno board to connect an external LED using
the accompanying wiring diagram as a guide.
We'll observe that when using pin 13, both the built-in LED, as well as
the externally connected one will blink simultaneously!
------------------------------------------------------------------------
Please consider buying products from Acrobotic to help fund future
Open-Source projects like this! We’ll always put our best effort in every
project, and release all our design files and code for you to use.
http://acrobotic.com/
------------------------------------------------------------------------
License:
Beerware License; if you find the code useful, and we happen to cross
paths, you're encouraged to buy us a beer. The code is distributed hoping
that you in fact find it useful, but without warranty of any kind.
------------------------------------------------------------------------*/
// Using an external LED, we'll notice that both the internal
// and external LEDs blink at the same rate!
int led = 13;
// the setup routine runs once when you press reset:
void setup()
{
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}
// the loop routine runs over and over again forever:
void loop()
{
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}