Skip to content
Simon Friedberger edited this page Jun 14, 2024 · 7 revisions

Format

Entry Specification

  • The list is a set of rules, with one rule per line.
  • Each line is only read up to the first whitespace; entire lines can also be commented using //.
  • Each line which is not entirely whitespace or begins with a comment contains a rule.
  • Each rule lists a public suffix, with the subdomain portions separated by dots (.) as usual. There is no leading dot.
  • The wildcard character * (asterisk, Specifically U+002A * 2a ASTERISK) matches any valid sequence of characters in a hostname part. Wildcards in the PSL follow the syntax defined in RFC1034, section 4.3.3 (pp24-25), and are restricted to appear only in the leftmost position and must wildcard an entire label.
  • If a hostname matches more than one rule in the file, the longest matching rule (the one with the most levels) will be used.
  • An exclamation mark (!) at the start of a rule marks an exception to a previous wildcard rule. An exception rule takes priority over any other matching rule.
  • The list uses Unicode, not Punycode forms on strings, and the file is encoded using UTF-8.
  • Entries should not have trailing whitespace

The following characters are used explicitly, please only use these and avoid Unicode variants of the following:

  • Space " " (Dec/Hex: 32/20),
  • Exclamation "!" (Dec/Hex: 33/21),
  • Forward Slash "/" (Dec/Hex: 47/2F),
  • Period/Dot "." (Dec/Hex: 46/2E), and
  • Asterisk "*" (Dec/Hex: 42/2A).
  • When in doubt, for the above characters, only use the ASCII characters between Dec/Hex 32/20 and 126/7E
  • For header lines, material after the dual slashes is more forgiving as it is comment-based, but only use the standard "@" in email addresses, please.

Examples of valid entries and ! or * / wildcard usage:

Entry Valid/Invalid Why
*.foo Valid Correct Use of Wildcard
!specificsite.foo Valid Correct use of Exclamation to indicate exception to previous wildcard rule
*.bar.foo Valid Correct Use of Wildcard
*.예 Valid Correct Use of Wildcard
*.예.예 Valid Correct Use of Wildcard

Examples of invalid entries and ! or * / wildcard usage:

Entry Valid/Invalid Why
*.*.bar.foo Invalid Multiple Wildcard
bar.*.foo Invalid Nested Wildcard (must be in leftmost position, only)
*bar.foo Invalid Wildcard Non-delimited by dot
예.*.foo Invalid Nested Wildcard
ǃspecificsite.예.예 Invalid Used latin letter retroflex click unicode char (01C3) instead of exclamation (33)

Right-to-left sorting

Keep the list of suffix (if more than one) in alphabetical order. Sort first by the TLD, then the first label to the left of the TLD, and so forth. For example, the following is sorted by TLD first (com, invalid, net, org, test), then within each TLD, sorted by the first label (example), then, for entries with more labels, each label is sorted, with shorter entries appearing first:

beta.example.com
alpha.beta.example.com   // alpha.beta has more labels than beta, and thus comes second.
delta.example.invalid    // invalid sorts between com and net
beta.example.net
delta.example.net        // delta sorts after beta, as example and net are the same
charlie.example.org      // org sorts after net, because sorting is by the right-most label, not the left-most
alpha.example.test

This is a simple Ruby script (called psl-sort) you can use to sort entries in a file:

#!/usr/bin/env ruby

input  = STDIN.read.split("\n")
output = input.sort_by { |x| x.split(".").reverse }

puts output.join("\n")

and the same in Python

#!/usr/bin/env python3

import sys
lines = sys.stdin.readlines()
sorted_lines = sorted(lines, key=lambda x: list(reversed(x.split("."))))
for line in sorted_lines:
    print(line.strip())

Usage:

$ cat file.txt | psl-sort

Example

Here is an example (incomplete) list section. The rules are numbered, but the numbers would not appear in the real file:

        1. com
        2. *.foo.com
        3. *.jp
        // Hosts in .hokkaido.jp can't set cookies below level 4...
        4. *.hokkaido.jp
        5. *.tokyo.jp
        // ...except hosts in pref.hokkaido.jp, which can set cookies at level 3.
        6. !pref.hokkaido.jp
        7. !metro.tokyo.jp

The example above would be interpreted as follows, in the case of cookie-setting, and using "foo" and "bar" as generic hostnames:

1:

  • Cookies may be set for foo.com.

(WARNING: Many libraries interpret *.foo.com as implying foo.com. So this would behave differently. See: https://github.com/publicsuffix/list/issues/694)

2:

  • Cookies may not be set for bar.foo.com.
  • Cookies may be set for example.bar.foo.com.

3:

  • Cookies may be set for foo.bar.jp.
  • Cookies may not be set for bar.jp.

4:

  • Cookies may be set for foo.bar.hokkaido.jp.
  • Cookies may not be set for bar.hokkaido.jp.

5:

  • Cookies may be set for foo.bar.tokyo.jp.
  • Cookies may not be set for bar.tokyo.jp.

6:

  • Cookies may be set for pref.hokkaido.jp because the exception overrides the previous rule.

7:

  • Cookies may be set for metro.tokyo.jp, because the exception overrides the previous rule.

Formal algorithm

Here is an algorithm for determining the Public Suffix of a domain. (Note: it may not be the most efficient algorithm.) The domain, as well as all rules from the Public Suffix List, must be canonicalized in the normal way for hostnames - lower-case, Punycode (RFC 3492) - prior to being compared.

Definitions

  • The Public Suffix List consists of a series of lines, separated by \n.
  • Each line is only read up to the first whitespace; entire lines can also be commented using //.
  • Each line which is not entirely whitespace or begins with a comment contains a rule.
  • A rule may begin with a "!" (exclamation mark). If it does, it is labelled as a "exception rule" and then treated as if the exclamation mark is not present.
  • A domain or rule can be split into a list of labels using the separator "." (dot). The separator is not part of any of the labels. Empty labels are not permitted, meaning that leading and trailing dots are ignored.
  • A domain is said to match a rule if and only if all of the following conditions are met:
  • When the domain and rule are split into corresponding labels, that the domain contains as many or more labels than the rule.
  • Beginning with the right-most labels of both the domain and the rule, and continuing for all labels in the rule, one finds that for every pair, either they are identical, or that the label from the rule is "*".

Algorithm

  • Match domain against all rules and take note of the matching ones.
  • If no rules match, the prevailing rule is "*".
  • If more than one rule matches, the prevailing rule is the one which is an exception rule.
  • If there is no matching exception rule, the prevailing rule is the one with the most labels.
  • If the prevailing rule is a exception rule, modify it by removing the leftmost label.
  • The public suffix is the set of labels from the domain which match the labels of the prevailing rule, using the matching algorithm above.
  • The registered or registrable domain is the public suffix plus one additional label.

Divisions

The Public Suffix List is subdivided, using markers in the comments, into two sections, labelled as ICANN domains and PRIVATE domains.

ICANN domains (Perhaps IANA would have been a better label, but changing it may break integrations that are built) are those delegated by ICANN or part of the IANA root zone database. The authorized registry may express further policies on how they operate the TLD, such as subdivisions within it. Updates to this section can be submitted by anyone, but if they are not an authorized representative of the registry then they will need to back up their claims of error with documentation from the registry's website or coordinate with the NIC Adminstrators to have them enter in _PSL TXT record leaf validation.

PRIVATE domains are amendments submitted by the domain holder, as an expression of how they operate their domain security policy. Updates to this section are only accepted from authorized representatives of the domain registrant. This is so we can be certain they know what they are getting into.

While some applications, such as browsers when considering cookie-setting, treat all entries the same, other applications may wish to treat ICANN domains and PRIVATE domains differently. For example, Certification Authorities checking for wildcard misissuance would not issue a "*.com" wildcard cert ("com" is in the ICANN domains list) but could legitimately issue a "*.appspot.com" wildcard cert to the domain owner, in this case Google ("appspot.com" is in the PRIVATE domains list).

Clone this wiki locally