Be notified of new releases
Create your free GitHub account today to subscribe to this repository for new releases and build software alongside 31 million developers.Sign up
RX voltage adjustment moved to RX Setup.
TGY CAT01 enabled again.
Using linear scale to map SNR to channel value:
Max value = 40dB
Min value = 9dB
Added fast telemetry update - no time limits at all when updating telemetry data.
Pressure can be configured as Vario source.
Version with vario dead band added.
Version with 8CH PPM input added.
Student mode crash fixed.
Logarithmic scale SNR to channel mapping with use of highest SNR seen since start.
Timer start condition fixed.
Aux Channels configuration unified.
Channels 7-14 Endpoints added.
Channels 7-14 Sub trim added.
SNR added as channel value.
Version checking - initialization if different performed.
CAT01 disabled because of limited space.
Altitude calculation with TGY-CAT01.
System setup -> Extra -> ASL
Long press OK - set default value
Short press OK change cursor between temperature at see level and pressure at see level.
If desired value is altitude relative to start position change values to trigger:
-pressure equals actual pressure
-temperature equals actual pressure
Altitude should be re-calculated on every value change.
The archive contains 2 binaries:
fs-i6_updater_12_11_19_39.bin for units without SW E
fs-i6-swe_updater_12_11_19_40.bin for units with SW E
Configuration of channels 11-14 added (Extra menu)
Some radios are not able to enter menu when SW E firmware is flashed so please use version no SW E on your unit if you have not modded hardware to support SW E.
FW GFX editor added.
First GitHub Release.
All feature implemented so far plus:
Switch B handled as 3 position switch when used together with Switch A and Switch C.
Timer alarm not triggered when set to 0:00:00
Displaying correct (external/internal) voltage on main screen.