…tcg/

These files got missed when populating tcg/.
Because they are included with "", no change to the users required.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230504110412.1892411-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

While we cannot move the main "helper.h" out of target/arm/,
due to usage by generic code, we can move the sub-includes.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230504110412.1892411-3-richard.henderson@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Bit 63 in a Table descriptor is only the NSTable bit for stage 1
translations; in stage 2 it is RES0.  We were incorrectly looking at
it all the time.

This causes problems if:
 * the stage 2 table descriptor was incorrectly setting the RES0 bit
 * we are doing a stage 2 translation in Secure address space for
   a NonSecure stage 1 regime -- in this case we would incorrectly
   do an immediate downgrade to NonSecure

A bug elsewhere in the code currently prevents us from getting
to the second situation, but when we fix that it will be possible.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230504135425.2748672-2-peter.maydell@linaro.org

We currently don't correctly handle the VSTCR_EL2.SW and VTCR_EL2.NSW
configuration bits.  These allow configuration of whether the stage 2
page table walks for Secure IPA and NonSecure IPA should do their
descriptor reads from Secure or NonSecure physical addresses. (This
is separate from how the translation table base address and other
parameters are set: an NS IPA always uses VTTBR_EL2 and VTCR_EL2
for its base address and walk parameters, regardless of the NSW bit,
and similarly for Secure.)

Provide a new function ptw_idx_for_stage_2() which returns the
MMU index to use for descriptor reads, and use it to set up
the .in_ptw_idx wherever we call get_phys_addr_lpae().

For a stage 2 walk, wherever we call get_phys_addr_lpae():
 * .in_ptw_idx should be ptw_idx_for_stage_2() of the .in_mmu_idx
 * .in_secure should be true if .in_mmu_idx is Stage2_S

This allows us to correct S1_ptw_translate() so that it consistently
always sets its (out_secure, out_phys) to the result it gets from the
S2 walk (either by calling get_phys_addr_lpae() or by TLB lookup).
This makes better conceptual sense because the S2 walk should return
us an (address space, address) tuple, not an address that we then
randomly assign to S or NS.

Our previous handling of SW and NSW was broken, so guest code
trying to use these bits to put the s2 page tables in the "other"
address space wouldn't work correctly.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1600
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504135425.2748672-3-peter.maydell@linaro.org

I am now employed by Daynix. Although my role as a reviewer of
macOS-related change is not very relevant to the employment, I decided
to use the company email address to avoid confusions from different
addresses.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20230506072333.32510-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

When we take a PNG screenshot the ordering of the colour channels in
the data is not correct, resulting in the image having weird
colouring compared to the actual display.  (Specifically, on a
little-endian host the blue and red channels are swapped; on
big-endian everything is wrong.)

This happens because the pixman idea of the pixel data and the libpng
idea differ.  PIXMAN_a8r8g8b8 defines that pixels are 32-bit values,
with A in bits 24-31, R in bits 16-23, G in bits 8-15 and B in bits
0-7.  This means that on little-endian systems the bytes in memory
are
   B G R A
and on big-endian systems they are
   A R G B

libpng, on the other hand, thinks of pixels as being a series of
values for each channel, so its format PNG_COLOR_TYPE_RGB_ALPHA
always wants bytes in the order
   R G B A

This isn't the same as the pixman order for either big or little
endian hosts.

The alpha channel is also unnecessary bulk in the output PNG file,
because there is no alpha information in a screenshot.

To handle the endianness issue, we already define in ui/qemu-pixman.h
various PIXMAN_BE_* and PIXMAN_LE_* values that give consistent
byte-order pixel channel formats.  So we can use PIXMAN_BE_r8g8b8 and
PNG_COLOR_TYPE_RGB, which both have an in-memory byte order of
    R G B
and 3 bytes per pixel.

(PPM format screenshots get this right; they already use the
PIXMAN_BE_r8g8b8 format.)

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1622
Fixes: 9a0a119 ("Added parameter to take screenshot with screendump as PNG")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230502135548.2451309-1-peter.maydell@linaro.org

In the doc sources, we have a few cross-reference targets with odd
names "pcsys_005fxyz".  These are the legacy of the semi-automated
conversion of the old info docs to rST (the '005f' is because ASCII
0x5f is '_' and the old info link names had underscores in them).

Remove the targets which nothing links to, and rename the two targets
which are used to something a bit more descriptive.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230421163642.1151904-1-peter.maydell@linaro.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>

Coverity points out (in CID 1508390) that write_bootloader has
some dead code, where we assign to 'p' and then in the following
line assign to it again. This happened as a result of the
refactoring in commit cd5066f.

Fix the dead code by removing the 'void *v' variable entirely and
instead adding a cast when calling bl_setup_gt64120_jump_kernel(), as
we do at its other callsite in write_bootloader_nanomips().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Semihosting has been made a 'default y' entry in Kconfig, which does
not work because when building --without-default-devices, the
semihosting code would not be available.

Make semihosting unconditional when TCG is present.

Fixes: 29d9efc ("arm/Kconfig: Do not build TCG-only boards on a KVM-only build")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230508181611.2621-2-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

We cannot allow this config to be disabled at the moment as not all of
the relevant code is protected by it.

Commit 29d9efc ("arm/Kconfig: Do not build TCG-only boards on a
KVM-only build") moved the CONFIGs of several boards to Kconfig, so it
is now possible that nothing selects ARM_V7M (e.g. when doing a
--without-default-devices build).

Return the CONFIG_ARM_V7M entry to a state where it is always selected
whenever TCG is available.

Fixes: 29d9efc ("arm/Kconfig: Do not build TCG-only boards on a KVM-only build")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230508181611.2621-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

On a build configured with: --disable-tcg --enable-xen it is possible
to produce a QEMU binary with no TCG nor KVM support. Skip the cdrom
boot tests if that's the case.

Fixes: 0c1ae3f ("tests/qtest: Fix tests when no KVM or TCG are present")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230508181611.2621-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

In check_s2_mmu_setup() we have a check that is attempting to
implement the part of AArch64.S2MinTxSZ that is specific to when EL1
is AArch32:

    if !s1aarch64 then
        // EL1 is AArch32
        min_txsz = Min(min_txsz, 24);

Unfortunately we got this wrong in two ways:

(1) The minimum txsz corresponds to a maximum inputsize, but we got
the sense of the comparison wrong and were faulting for all
inputsizes less than 40 bits

(2) We try to implement this as an extra check that happens after
we've done the same txsz checks we would do for an AArch64 EL1, but
in fact the pseudocode is *loosening* the requirements, so that txsz
values that would fault for an AArch64 EL1 do not fault for AArch32
EL1, because it does Min(old_min, 24), not Max(old_min, 24).

You can see this also in the text of the Arm ARM in table D8-8, which
shows that where the implemented PA size is less than 40 bits an
AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit
IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to
constrain the IPA to the implemented PA size.

Because of part (2), we can't do this as a separate check, but
have to integrate it into aa64_va_parameters(). Add a new argument
to that function to indicate that EL1 is 32-bit. All the existing
callsites except the one in get_phys_addr_lpae() can pass 'false',
because they are either doing a lookup for a stage 1 regime or
else they don't care about the tsz/tsz_oob fields.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230509092059.3176487-1-peter.maydell@linaro.org

…/pmaydell/qemu-arm into staging

target-arm queue:
 * More refactoring of files into tcg/
 * Don't allow stage 2 page table walks to downgrade to NS
 * Fix handling of SW and NSW bits for stage 2 walks
 * MAINTAINERS: Update Akihiko Odaki's email address
 * ui: Fix pixel colour channel order for PNG screenshots
 * docs: Remove unused weirdly-named cross-reference targets
 * hw/mips/malta: Fix minor dead code issue
 * Fixes for the "allow CONFIG_TCG=n" changes
 * tests/qtest: Don't run cdrom boot tests if no accelerator is present
 * target/arm: Correct AArch64.S2MinTxSZ 32-bit EL1 input size check

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmReXCMZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hUTEACL2MrxSmAssP0pZ6qQGqgM
# uKz1aL8WDz2MyDzgt0jvy+bRw6081k4iyFGLpsHPWjAm9lipwVSIbVKsvJOrXxpJ
# LDfllv6XtGF/W0o0NDB2KRjC9ro71JoWWJrvjXPYImid3cBfmSdgyR3eUgOLbfj6
# qT2U9nKk8heRDXVb/BWorvajbZm0GaIypL4wUh3Ab2W17Fot073QZLpwcI7LQTJR
# RkyyknzCfaN0xLQ4wEsqJjfLpxgnB2XubSXtG86or7kiIC5/sPivE7fDj0BK9hAM
# Lpe/fkqBrCMGH3K4AC6zDWHQyDtrUT8IKTjR/kIdkjTBcVSzTyfiGob8/Tlmsez9
# rv0vrRJdNguJVo7zd2F17HmsPf4fznS56Yz392kY16LEV/OC6gISz2Sp7qdgbqHA
# ArEFQaYDi2AE/u2wBduZV+SVgZaDrEVtTDo5aw7ms3ebnaMFjB1YmMdp0vZE0p89
# Nlx2ooh0DsYOSLHGWjgRmegGpHgiWcYIW2Ekj2BvzB11fH9lbxvHZMavYNGugdh+
# Z0zj3qRp58+Qg7529AvLe9BWSGhIg6GIuTR/ROux6UL0EV6IZNcjtXQhEOSBqFMF
# uRjcbWOKZtPcpgC7aJj8JeeuzzkaqvWziw8S/ajRes65PvCCQvlxNlJfv49MkS5S
# iMYyID863vocejQpGMqs6A==
# =D3ev
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 12 May 2023 04:32:51 PM BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20230512' of https://git.linaro.org/people/pmaydell/qemu-arm:
  target/arm: Correct AArch64.S2MinTxSZ 32-bit EL1 input size check
  tests/qtest: Don't run cdrom boot tests if no accelerator is present
  target/arm: Select CONFIG_ARM_V7M when TCG is enabled
  target/arm: Select SEMIHOSTING when using TCG
  hw/mips/malta: Fix minor dead code issue
  docs: Remove unused weirdly-named cross-reference targets
  ui: Fix pixel colour channel order for PNG screenshots
  MAINTAINERS: Update Akihiko Odaki's email address
  target/arm: Fix handling of SW and NSW bits for stage 2 walks
  target/arm: Don't allow stage 2 page table walks to downgrade to NS
  target/arm: Move helper-{a64,mve,sme,sve}.h to tcg/
  target/arm: Move translate-a32.h, arm_ldst.h, sve_ldst_internal.h to tcg/

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>