Permalink
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Browse files
Puck Macropad (#4274)
* Add Puck * Update Manufacturer name in metadata * Add num lock to high layer * update pins * update pin settings * fix numlock key * Cleanup config.h * Update device info * updates after review
- Loading branch information
Showing
with
190 additions
and 0 deletions.
- +31 −0 keyboards/puck/config.h
- +64 −0 keyboards/puck/keymaps/default/keymap.c
- +1 −0 keyboards/puck/puck.c
- +15 −0 keyboards/puck/puck.h
- +11 −0 keyboards/puck/readme.md
- +68 −0 keyboards/puck/rules.mk
@@ -0,0 +1,31 @@ | ||
#pragma once | ||
|
||
#include "config_common.h" | ||
|
||
/* USB Device descriptor parameter */ | ||
#define VENDOR_ID 0xFEED | ||
#define PRODUCT_ID 0x6060 | ||
#define DEVICE_VER 0x0001 | ||
#define MANUFACTURER OkKeebs LLC | ||
#define PRODUCT Puck | ||
#define DESCRIPTION 4x3 macropad | ||
|
||
/* key matrix size */ | ||
#define MATRIX_ROWS 4 | ||
#define MATRIX_COLS 3 | ||
|
||
#define MATRIX_ROW_PINS { D2, D3, C6, C7 } | ||
#define MATRIX_COL_PINS { B4, D7, D6 } | ||
#define UNUSED_PINS | ||
|
||
/* COL2ROW or ROW2COL */ | ||
#define DIODE_DIRECTION ROW2COL | ||
|
||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | ||
#define DEBOUNCING_DELAY 5 | ||
|
||
/* number of backlight levels */ | ||
#define BACKLIGHT_LEVELS 3 | ||
|
||
/* Locking resynchronize hack */ | ||
#define LOCKING_RESYNC_ENABLE |
@@ -0,0 +1,64 @@ | ||
#include QMK_KEYBOARD_H | ||
|
||
#define _BL 0 | ||
#define _HL 1 | ||
#define _LL 2 | ||
|
||
enum keycodes { | ||
LOW, | ||
HIGH | ||
}; | ||
|
||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | ||
/* | ||
* Base Layer (Numbers) | ||
*/ | ||
[_BL] = LAYOUT( | ||
KC_KP_7, KC_KP_8, KC_KP_9, | ||
KC_KP_4, KC_KP_5, KC_KP_6, | ||
KC_KP_1, KC_KP_2, KC_KP_3, | ||
LOW, KC_KP_0, HIGH | ||
), | ||
/* | ||
* High Layer (Work) | ||
*/ | ||
[_HL] = LAYOUT( | ||
KC_NUMLOCK, KC_PAST, KC_NO, | ||
KC_PMNS, KC_PENT, KC_PPLS, | ||
KC_NO, KC_PSLS, KC_NO, | ||
KC_NO, KC_PDOT, KC_NO | ||
), | ||
/* | ||
* Low Layer (Media) | ||
*/ | ||
[_LL] = LAYOUT( | ||
KC_NO, KC_VOLU, KC_NO, | ||
KC_MPRV, KC_MPLY, KC_MNXT, | ||
KC_NO, KC_VOLD, KC_NO, | ||
KC_NO, KC_NO, KC_NO | ||
), | ||
}; | ||
|
||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | ||
switch(keycode) { | ||
case HIGH: | ||
if (record->event.pressed) { | ||
layer_on(_HL); | ||
}else{ | ||
layer_off(_HL); | ||
layer_off(_LL); | ||
} | ||
return false; | ||
break; | ||
case LOW: | ||
if (record->event.pressed) { | ||
layer_on(_LL); | ||
}else{ | ||
layer_off(_LL); | ||
layer_off(_HL); | ||
} | ||
return false; | ||
break; | ||
} | ||
return true; | ||
} |
@@ -0,0 +1 @@ | ||
#include "puck.h" |
@@ -0,0 +1,15 @@ | ||
#ifndef PUCK_H | ||
#define PUCK_H | ||
|
||
#include "quantum.h" | ||
|
||
#define LAYOUT( \ | ||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B \ | ||
) { \ | ||
{ K00, K01, K02 }, \ | ||
{ K03, K04, K05 }, \ | ||
{ K06, K07, K08 }, \ | ||
{ K09, K0A, K0B }, \ | ||
} | ||
|
||
#endif |
@@ -0,0 +1,11 @@ | ||
A 4 x 3 macropad. | ||
|
||
Keyboard Maintainer: [john-pettigrew](https://github.com/john-pettigrew) | ||
Hardware Supported: Puck PCB. | ||
Hardware Availability: [OkKeebs.com](https://okkeebs.com/products/puck-pcb) | ||
|
||
Make example for this keyboard (after setting up your build environment): | ||
|
||
make puck:default | ||
|
||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@@ -0,0 +1,68 @@ | ||
|
||
|
||
# MCU name | ||
MCU = atmega32u4 | ||
|
||
# Processor frequency. | ||
# This will define a symbol, F_CPU, in all source code files equal to the | ||
# processor frequency in Hz. You can then use this symbol in your source code to | ||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | ||
# automatically to create a 32-bit value in your source code. | ||
# | ||
# This will be an integer division of F_USB below, as it is sourced by | ||
# F_USB after it has run through any CPU prescalers. Note that this value | ||
# does not *change* the processor frequency - it should merely be updated to | ||
# reflect the processor speed set externally so that the code can use accurate | ||
# software delays. | ||
F_CPU = 16000000 | ||
|
||
# | ||
# LUFA specific | ||
# | ||
# Target architecture (see library "Board Types" documentation). | ||
ARCH = AVR8 | ||
|
||
# Input clock frequency. | ||
# This will define a symbol, F_USB, in all source code files equal to the | ||
# input clock frequency (before any prescaling is performed) in Hz. This value may | ||
# differ from F_CPU if prescaling is used on the latter, and is required as the | ||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | ||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | ||
# at the end, this will be done automatically to create a 32-bit value in your | ||
# source code. | ||
# | ||
# If no clock division is performed on the input clock inside the AVR (via the | ||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | ||
F_USB = $(F_CPU) | ||
|
||
# Interrupt driven control endpoint task(+60) | ||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | ||
|
||
|
||
# Boot Section Size in *bytes* | ||
# Teensy halfKay 512 | ||
# Teensy++ halfKay 1024 | ||
# Atmel DFU loader 4096 | ||
# LUFA bootloader 4096 | ||
# USBaspLoader 2048 | ||
BOOTLOADER = halfkay | ||
|
||
# Build Options | ||
# change to "no" to disable the options, or define them in the Makefile in | ||
# the appropriate keymap folder that will get included automatically | ||
# | ||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | ||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | ||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | ||
CONSOLE_ENABLE = no # Console for debug(+400) | ||
COMMAND_ENABLE = no # Commands for debug and configuration | ||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | ||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | ||
MIDI_ENABLE = no # MIDI controls | ||
AUDIO_ENABLE = no # Audio output on port C6 | ||
UNICODE_ENABLE = no # Unicode | ||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | ||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | ||
|
||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | ||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend |