Releases: qradiolink/qradiolink
Releases · qradiolink/qradiolink
Release 0.9.0-1
Release 0.8.13-2
* Transmit carrier offset is now configurable from UI
* Fixed 4FSK RRC 1k demodulator
* Fixed GMSK all rates modulator and demodulator
* Fixed TX and RX filters for 2FSK and 4FSK
* Reduced clarifier step for some digital modes to ease tuning
* Consolidate DMR Tier III base station functions
* Direct support for Ettus USRP via gnuradio-uhd and libuhd
* Reduced roundtrip latency to half (350 ms) for the DMR TDMA RF channel
* Added RSSI calculation for MMDVM channel
* Compatibility with tag 1.1 of MMDVM-SDR
* Added documentation for DMR trunking mode with MMDVM
Release 0.8.11-1
* Fixed carrier drops at start of transmissions when streaming UDP or VOIP packets * Faster synchronization at the start of digital transmissions * Added 500 msec of history to the constellation display if FFT history is enabled * UDP and VOIP network packets drive the timing of the transmit flowgraph * Fixed AGC labels partly obscured in controls menu bar
Release 0.8.10-1
* Added UDP audio streaming mode, for both transmit and receive * Interoperability with SVXlink via UDP audio * M17 protocol improvements: decode and encode channel access numbers, added special TX destinations (ECHO, UNLINK, BROADCAST, callsign) * Fixed issue with TX remaining stuck in simplex mode when VOIP forwarding is on * Fixed issues with some CLI commands not interpreted correctly * Adjustment of FM RX and TX flowgraphs * CTCSS tones in FM modes are not filtered if CTCSS is disabled, and are passed to external applications
Release 0.8.9-1
* Reduced sample rate for MMDVM modes to 240k (better efficiency) * Fixed LimeSDR calibration (MMDVM multicarrier) * Changed communication method to MMDVM-SDR (requires version 1.0 of MMDVM-SDR) * Added setting for burst delay in milliseconds (MMDVM modes) * Improced reliability in MMDVM multicarrier mode * Fixed other issues with MMDVM modes (DMR slot overruns and underruns) * Fixed LimeRFE duplex mode not set correctly at startup * Fixed single core CPU usage increase to maximum after some hours in MMDVM modes * Fixed M17 callsign decoding * Added clarifier frequency offset display * Some other minor bugfixes
Release 0.8.7-1
Release 0.8.7-1: * Added MMDVM mode with TDMA support (DMR, YSF, D-Star, M17) compatible with LimeSDR * Added MMDVM multi-carrier mode usable with LimeSDR * Fixed issue with frequency tuning in remote control interface via telnet * Improved CLI only operation
Release 0.8.6-2
* Bugfix: LimeRFE does not support Duplex for ham bands below 144 MHz * Bugfix: displayed mode of memory channel reversed between RX and TX * Bugfix: rx frequency truncated if regional settings are not set to English * LimeRFE: Both WIDEBAND_1000 and WIDEBAND_4000 support duplex mode with J4 * Add support for LimeRFE attenuator and notch filter
Release 0.8.6-1
- Added support for the LimeRFE RF frontend
- Integration with MMDVM-SDR, digital hotspot bridge
- Some FFT rendering improvements
Release 0.8.5-2
* Replaced some artwork not compatible with GPL3 * Added coloured FFT display option * Fixed callsign display in Mumble
Release 0.8.5-1
* Fixed some graphical issues in Gnome and LXDE * Added full screen shortcut (Ctrl+Shift+F in KDE) * Fixed PTT shortcut (Space) triggering twice * Reduced minimum AGC attack time